Search the Community

After I start recording from an M3U source, wait a bit, and then go to Recordings and play the video, it plays fine for about 20 minutes and then Emby Server and my computer become largely unresponsive. My computer, in particular, loses all network connections; many applications will not run or exhibit strange behavior; it won't even shut down properly, so I have to turn off the power. Note that this procedure produces the same problem every time, regardless of how long I let the video record before playing and whether throttling is enabled or not. Playing videos for which recording has completed works fine. Logs are attached. Also, I noticed that my system log reports the following error around the time the crash occurs: kernel void IOAccelFenceMachine::fence_timeout(IOTimerEventSource *): IntelAccelerator prodding blockFenceInterrupt I thought this issue might be macOS specific (I'm on Catalina 10.15.2), so I installed the Emby Server Docker container, but I get the same behavior - my computer doesn't freeze, but the container becomes unresponsive, forcing me to restart it. embyserver-63712345059.txt ffmpeg-directstream-f851e438-65a6-4be2-a518-c610c06fda5e_1.txt hardware_detection-63712342884.txt

Hi, I installed the latest docker emby server image on Ubuntu 18.04.03 LTS (Hardware: Odroid N2 single board computer) with the following compose parameters: emby: container_name: emby restart: unless-stopped image: linuxserver/emby:latest volumes: - ${DOCKERCONFDIR}/emby:/config - /media/usb0/nas/Media:/mnt/share1 - /media/usb0/nas/Downloads/plex_tmp:/transcode ports: - 8096:8096 - 8920:8920 environment: - TZ=${TZ} - PUID=1000 - PGID=1000 The installation went fine and was able to login and started to play Series and it went fine until it could do it on Direct Play. The issue started when Transcode is required. Then what happened is: - Started A movie needed transcode - The server started transcoding and crashed without even starting the film, the Web App only showed the movie thumbnail not even the player control. (on iOS app didnt work either) - However after the crash the Transcoding still continued in the /transcode-tmp folder (*.ts files and *.m3u8 file created) until the end of the movie/serie but couldnt be streamed/played. As an additional information I tried to play these files via a Samba share with a media player and played fine so it isnt ocrrupted and direct play works fine via emby so it cannot be a network issue. I attached the log files. If any additional information required let me know. I would appreciate any help. Thanks in advance. embyserver.txt hardware_detection.txt ffmpeg-remux-.txt

Hey Guys, I have Emby 4.2.1.0 running in a Docker container on a Linux host. All media is stored on Linux and presented to Kodi clients through SMB shares. Emby appears to work wonderfully and had no real issues. Just trying to understand a recent scenario 1) Added a new (to my system) TV sereis - using Sonarr and then scraped and downloaded by Sabnzbd - the TV sereis is Yellowstone 2) All episodes from both seasons were found and downloaded 3) On the same day Sonarr went through its list of TV series not fulfilled and downloaded some old episodes of Whose Line is it anyway (Season 13) - We are currently in Season 15 4) In my Kodi New Episodes list - all the ones from Whose Line is it anyway were listed - but none of the ones from Yellowstone 5) So i went into the show list and Yellowstone and all its episodes and data showed up - together with correct airing dates etc So it would appear Emby had found the series, scanned it and added it to the database - but had not told Kodi about them being new I can not give other exact examples to this level of detail - but this has happened before and it always seem to be when i add a show to the system that has not been added before - regardless of the age of the series So i guess my question is - what characterises a new Episode to Emby and gets it to present that to Kodi - and could there be something weird with the algorith - if it is a continuuing show, that is new to the system ? Craig

Hi guys, So I've seen that quite a few are already running Emby in a Kubernetes Cluster. My setup currently looks like this: - One Kubernetes Node (I'm using K8s because I'm familiar with it and I like writing deployment-manifests :-) ) - A standard router from my ISP, doing port-forwards on HTTP & HTTPS - MetalLB assigning virtual IPs for loadbalancers (L2) - Nginx Ingress using a LoadBalancer, so it gets a virtual IP. uses Service with `externalTrafficPolicy: local`. - Emby using an Ingress-Resource, HTTPS, letsencrypt certificates. My issue though is that it seems like Emby considers everything to be the "local" network. From skimming through the logs: 2019-11-05 19:40:11.692 Info HttpServer: HTTP GET http://<mydomain>:8096/emby/Users/<key>. UserAgent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15) AppleWebKit/605.1.15 (KHTML, like Gecko) Version/13.0.2 Safari/605.1.15 2019-11-05 19:40:11.695 Info HttpServer: HTTP Response 200 to 127.0.0.1. Time: 3ms. http://<mydomain>:8096/emby/Users/<key> A few things: My Emby instance is not reachable under http://<mydomain>:8096, but rather on https://<mydomain>:443 (through the Ingress). It seems like Emby responds to the request to localhost?? This would explain why Emby considers everything to be local network. Anybody an idea why? Or what did you guys set to actually pass through the Source IP? Like mentioned before, I'm already using `externalTrafficPolicy: Local` for the nginx-ingress service. Also, for reference, the deployment yaml: apiVersion: app/v1 kind: Deployment metadata: name: emby-server labels: app: emby spec: replicas: 1 selector: matchLabels: app: emby template: metadata: labels: run: emby-server app: emby spec: containers: - name: emby-server image: emby/embyserver:latest env: - name: "UID" value: "1030" # emby user - name: "GID" value: "1111" # share group ports: - containerPort: 8096 name: emby-http volumeMounts: - mountPath: /config name: emby-config - mountPath: /mnt/media name: emby-media volumes: - name: emby-media hostPath: type: Directory path: /media - name: emby-config hostPath: type: DirectoryOrCreate path: /mnt/cluster/emby Total noob with emby, deployed it a couple of days ago. Any help would be appreciated.

Hello, I’m wanting to try out Emby to see how it works for us and I’ll be installing it on an Intel NUC w/ Coffee Lake Core i7 setup running Linux Mint. I’m wondering what the advantages are of doing a standard install vs a Docker install? I’ve been searching online and don’t see much comparing the two. Is one easier than the other for initial setup or for long term maintainance? Any info would be brilliant! Thanks so much in advance!!

I'm running Emby via Docker on a Ubuntu 18.04 host. After I had issues with getting some new episodes detected, I started troubleshooting and eventually found that error. 2019-09-20 04:38:42.578 Error HttpServer: Error processing request *** Error Report *** Version: 4.2.1.0 Command line: /system/EmbyServer.dll -programdata /config -ffdetect /bin/ffdetect -ffmpeg /bin/ffmpeg -ffprobe /bin/ffprobe -restartexitcode 3 Operating system: Unix 5.0.0.27 64-Bit OS: True 64-Bit Process: True User Interactive: True Runtime: file:///system/System.Private.CoreLib.dll Processor count: 32 Program data path: /config Application directory: /system SQLitePCL.pretty.SQLiteException: Corrupt: database disk image is malformed SQLitePCL.pretty.SQLiteException: Exception of type 'SQLitePCL.pretty.SQLiteException' was thrown. at SQLitePCL.pretty.SQLiteException.CheckOk(sqlite3 db, Int32 rc) at SQLitePCL.pretty.StatementImpl.MoveNext() at Emby.Sqlite.SqliteExtensions.ExecuteQuery(IStatement This)+MoveNext() at Emby.Server.Implementations.Data.SqliteItemRepository.QueryItemsInTransaction[T](InternalItemsQuery query, IDatabaseConnection db, String[] columnsToSelect, Func`5 rowReaderFn, Boolean singleResult, String methodName) at Emby.Server.Implementations.Data.SqliteItemRepository.GetItemList(InternalItemsQuery query) at Emby.Server.Implementations.Library.LibraryManager.GetItemsResult(InternalItemsQuery query) at MediaBrowser.Controller.Entities.Folder.GetItems(InternalItemsQuery query) at MediaBrowser.Api.UserLibrary.ItemsService.GetQueryResult(GetItems request, DtoOptions dtoOptions, User user) at MediaBrowser.Api.UserLibrary.ItemsService.GetItems(GetItems request) at MediaBrowser.Api.UserLibrary.ItemsService.Get(GetItems request) at Emby.Server.Implementations.Services.ServiceController.Execute(HttpListenerHost appHost, Object requestDto, IRequest req) at Emby.Server.Implementations.Services.ServiceHandler.ProcessRequestAsync(HttpListenerHost appHost, IRequest httpReq, IResponse httpRes, RestPath restPath, String responseContentType, CancellationToken cancellationToken) at Emby.Server.Implementations.HttpServer.HttpListenerHost.RequestHandler(IRequest httpReq, ReadOnlyMemory`1 urlString, ReadOnlyMemory`1 host, ReadOnlyMemory`1 localPath, CancellationToken cancellationToken) Source: SQLitePCL.pretty TargetSite: Void CheckOk(SQLitePCL.sqlite3, Int32) All the topics I found say to move/delete the *.db files. Usually library.db. That has not fixed it. I have tried moving the following files in config/data to new names: activitylog.db authentication.db displaypreferences.db library.db users.db I first tried just the library.db file, but the library scan failed. After that I just moved all of them. The library scan failed again. The dashboard had this error: Exception of type 'SQLitePCL.pretty.SQLiteException' was thrown. at SQLitePCL.pretty.SQLiteException.CheckOk(sqlite3 db, Int32 rc) at SQLitePCL.pretty.StatementImpl.MoveNext() at Emby.Sqlite.SqliteExtensions.ExecuteQuery(IStatement This)+MoveNext() at Emby.Server.Implementations.Data.SqliteItemRepository.QueryItemsInTransaction[T](InternalItemsQuery query, IDatabaseConnection db, String[] columnsToSelect, Func`5 rowReaderFn, Boolean singleResult, String methodName) at Emby.Server.Implementations.Data.SqliteItemRepository.GetItemList(InternalItemsQuery query) at Emby.Server.Implementations.Library.LibraryManager.GetItemsResult(InternalItemsQuery query) at MediaBrowser.Controller.Entities.Folder.GetItems(InternalItemsQuery query) at MediaBrowser.Controller.Entities.Folder.GetChildren(InternalItemsQuery query) at Emby.Server.Implementations.IO.LibraryMonitor.Start() at Emby.Server.Implementations.Library.LibraryManager.ValidateMediaLibraryInternal(IProgress`1 progress, CancellationToken cancellationToken) at Emby.Server.Implementations.ScheduledTasks.ScheduledTaskWorker.ExecuteInternal(TaskOptions options) Right now the thumbnail extraction job is running. I'm tailing the log file and I'm seeing a lot of logs like this: 2019-09-21 02:30:00.244 Error ChapterImagesTask: Error refreshing thumbnails for /mnt/tv/The Avengers/Season 4/The Avengers S04E02 The Gravediggers.mp4 *** Error Report *** Version: 4.2.1.0 Command line: /system/EmbyServer.dll -programdata /config -ffdetect /bin/ffdetect -ffmpeg /bin/ffmpeg -ffprobe /bin/ffprobe -restartexitcode 3 Operating system: Unix 5.0.0.27 64-Bit OS: True 64-Bit Process: True User Interactive: True Runtime: file:///system/System.Private.CoreLib.dll Processor count: 32 Program data path: /config Application directory: /system SQLitePCL.pretty.SQLiteException: Corrupt: database disk image is malformed SQLitePCL.pretty.SQLiteException: Exception of type 'SQLitePCL.pretty.SQLiteException' was thrown. at SQLitePCL.pretty.SQLiteException.CheckOk(sqlite3 db, Int32 rc) at SQLitePCL.pretty.StatementImpl.MoveNext() at Emby.Sqlite.SqliteExtensions.ExecuteQuery(IStatement This)+MoveNext() at Emby.Server.Implementations.Data.SqliteItemRepository.GetChapters(BaseItem item) at MediaBrowser.Providers.MediaInfo.ChapterImagesTask.Execute(CancellationToken cancellationToken, IProgress`1 progress) Source: SQLitePCL.pretty TargetSite: Void CheckOk(SQLitePCL.sqlite3, Int32) I am running via docker-compose and systemd. The compose file is using the straight emby/embyserver:latest image, and I have my data mounted via Docker named volumes and nfs. I think the db corruption might be due to my .service file not shutting down the Emby server before it kills the container. What is the command line command to run for that? Is there a way to tell which .db file is corrupted? The error messages do not leave any clues. Any ideas how I can get my Emby server back up and running? Right now when I try to browse, all I get is the loading circle animation. The log file pops up this kind of message: 2019-09-21 03:09:20.625 Info HttpServer: HTTP Response 500 to 192.168.10.3. Time: 6ms. http://hostname:8096/Users/784fca4761674832b51895c835a93714/Items?SortBy=SortName&SortOrder=Ascending&IncludeItemTypes=Movie&Recursive=true&Fields=BasicSyncInfo%2CMediaSourceCount%2CSortName%2CPrimaryImageAspectRatio%2CProductionYear&ImageTypeLimit=1&EnableImageTypes=Primary%2CBackdrop%2CThumb&StartIndex=0&Limit=100&ParentId=abebc196cc1b8bbf6f8bb5ca7b5ad6f1 Well, I went ahead and restored the backed up .db files. So all my old content is accessible now. But scanning for new results in a malformed database image message. Since it is different than what I've already shared, here it is. 2019-09-21 03:15:14.041 Error ProviderManager: Error refreshing item *** Error Report *** Version: 4.2.1.0 Command line: /system/EmbyServer.dll -programdata /config -ffdetect /bin/ffdetect -ffmpeg /bin/ffmpeg -ffprobe /bin/ffprobe -restartexitcode 3 Operating system: Unix 5.0.0.27 64-Bit OS: True 64-Bit Process: True User Interactive: True Runtime: file:///system/System.Private.CoreLib.dll Processor count: 32 Program data path: /config Application directory: /system SQLitePCL.pretty.SQLiteException: Corrupt: database disk image is malformed SQLitePCL.pretty.SQLiteException: Exception of type 'SQLitePCL.pretty.SQLiteException' was thrown. at SQLitePCL.pretty.SQLiteException.CheckOk(sqlite3 db, Int32 rc) at SQLitePCL.pretty.StatementImpl.MoveNext() at Emby.Server.Implementations.Data.SqliteItemRepository.SaveItem(IDatabaseConnection db, BaseItem item, Int64 topParentId, Int64 userDataKeyId, IStatement insertItemStatement, IStatement updateItemStatement) at Emby.Server.Implementations.Data.SqliteItemRepository.SaveItemsInTranscation(IDatabaseConnection db, List`1 tuples) at Emby.Server.Implementations.Data.SqliteItemRepository.SaveItems(List`1 items, CancellationToken cancellationToken) at Emby.Server.Implementations.Library.LibraryManager.UpdateItems(List`1 items, BaseItem parent, ItemUpdateType updateReason, CancellationToken cancellationToken) at Emby.Server.Implementations.Library.LibraryManager.UpdateItem(BaseItem item, BaseItem parent, ItemUpdateType updateReason) at MediaBrowser.Providers.Manager.MetadataService`2.SaveItem(MetadataResult`1 result, LibraryOptions libraryOptions, ItemUpdateType reason, CancellationToken cancellationToken) at MediaBrowser.Providers.Manager.MetadataService`2.RefreshMetadata(BaseItem item, MetadataRefreshOptions refreshOptions, CancellationToken cancellationToken) at MediaBrowser.Controller.Entities.BaseItem.RefreshMetadata(MetadataRefreshOptions options, CancellationToken cancellationToken) at MediaBrowser.Providers.Manager.ProviderManager.RefreshCollectionFolderChildren(MetadataRefreshOptions options, CollectionFolder collectionFolder, CancellationToken cancellationToken) at MediaBrowser.Providers.Manager.ProviderManager.RefreshItem(BaseItem item, MetadataRefreshOptions options, CancellationToken cancellationToken) at MediaBrowser.Providers.Manager.ProviderManager.StartProcessingRefreshQueue() Source: SQLitePCL.pretty TargetSite: Void CheckOk(SQLitePCL.sqlite3, Int32) So, how do I get scanning working again? Thanks!

As the title says, what are the advantages and disadvantages of having Emby Server run via Docker rather than being installed directly onto the machine? Are there any performance differences at all? Can docker take advantage of nVidia hardware acceleration? Is it worth migrating to Docker? My current setup: Ubuntu 19.04 (headless, no GUI) CPU: Ryzen 1700X RAM: 32GB DDR4 3200 HD: 500GB m.2 NVMe

Just migrated to a new QNAP (TVS-951X) and there was an issue getting vaapi working in my emby docker container. In QTS 4.3.6.0875 there are no default system groups (like video) and the /dev/dri folder is owned by admin:administrators with restrictive permissions, which are reset upon reboot. It was necessary to create an autorun.sh script to set things up for docker use. #!/bin/bash chown admin:video /dev/dri chmod 775 /dev/dri chown admin:video /dev/dri/* chmod 660 /dev/dri/* The docker needs to run as a user assigned to the video group (or have the video group's GID listed in GIDLIST), run in privileged mode, and have /dev/dri passed through as a device. This enables vaapi for me - qsv's a no-go. Edit: Something like this is (probably only) needed when running the docker as a non-root user.

Hi, I am having some issues doing hardware transcoding through docker. I have everything setup correctly (I think) but it looks like it's still using software. I've setup my emby user as a member of the video group, set permissions to /dev/dri/renderD128 to 777, and have the hardware decoder mapped through docker. See below for my docker-compose config: # Emby Media Server emby: image: emby/embyserver container_name: emby restart: unless-stopped network_mode: bridge ports: - "8096:8096/tcp" - "8920:8920/tcp" environment: - TZ=${TZ} - UID=${PUID_EMBY} - GID=${PGID_KODI} - GIDLIST=44 volumes: - ${PICKYDIR}/emby:/config - ${DOCKERDIR}/media:/mnt/share1 - ${DOCKERDIR}/backups:/mnt/share2 - ${SSD}/transcode_emby:/transcode devices: - "/dev/dri/renderD128:/dev/dri/renderD128" Any other ideas? embyserver.txtffmpeg-transcode-50eb18ad-ccac-460a-aa92-d25b2f210ad6_1.txthardware_detection-63692603061.txt

I'm an emby newbie so be kind to my dumb questions. First my emby server is running on a Linux based server in a Docker container. The Emby server is up and running just fine. I can access it well with my browse on my Ubuntu base desktop machine. I also have a QNAP NAS that I have had running for several years now. I currently contains photos, documents and music. No video or movies. I want to move all my music from the QNAP music library to the new EMBY server in bulk. Freeeing up a ton of space and repurposing the QNAP for other things than media serving. I have somewhere between 5,000 and 10,000 songs in the QNAP music library. So as you can see it is not a task that is manually realistic to do. For that reason I am looking for suggestions, procedures, or ideas on how best to accomplish this feet. Any help or suggestions will be greatly appreciated. One thing to bear in mind, I do not have any library structure set up on the Emby server yet. So this is very much a 'green field' installation. Thanks. Glenn.

Hi Everyone, I'm using emby inside the official docker container, v4.0.2.0 on Ubuntu Server 18.04.2 I don't understand why I'm seeing my GT430 (old card I know :'( ) as decoder but not as encoder :/ Tell me if I need to share some log or anything ? Thanks in advance !

Recently my Emby server stopped adding Movies to the library. Server version Version 4.0.2.0. Realtime Monitoring is enabled for both Movies and TV folder. TV shows are being added to the library and Movies are not. Just added a new show to the library and it added it and scanned for the new folder. Movies are not being added at all however. This started to happen at the beginning of February. Didn't notice till this week, I use Emby sparingly so it took a bit to notice. A manual library scan does not add the movies either. Using Sonarr and Radarr respectively. I checked the permissions on the Movie and TV folder and they are different. New shows are being added to the server using UID and GID nobody:nogroup. I have since changed the permission in Radarr to reflect the Server (unRAID) default. chmod 777 on Folders, and chmod 666 on files. chown nobody:users After the above permission changes Emby is still not adding new movies to it's library but is adding TV shows with the same above permissions. Content works fine with KODI, no issues there. What should I be looking for in Emby?

My streams are often stuttering while streaming. Even inside my own Homenetwork. Maybe someone can help me track down the issue? I am mostly streaming 1080p and I have a Intel Pentium G4560 which has a Passmark of 4868. That should usually be enough for a single 1080p Transcode. I stream mostly to Chromecast (Gen 2). I will attach a Serverlog from yesterday and a Transcodelog from a stuttering file I played yesterday. As far as I can see there are no issues. I run emby with docker-compose. I will also attach the relevant part of the compose file. If anyone has an idea what the issue can be I would be very happy. embyserver.txt ffmpeg-transcode.txt compose.txt

Hello, I want to migrate my local windows emby server into a docker image. I know, that I can use the backup/import plugin, but my library has about 2000 entries and many of them are manual, manual pictures, manual names etc. Is there a way to migrate the whole database and everything to my new server and change the library path to the new linux path without rescanning/manually editing all my files?

Hello, we are having problem that server keeps showing 502 bad gateway. Need to restart docker to resolve this, can u please check our log? emby_log.zip

Hi, I need your help with update on docker. I run docker 3.5.2 and I try to update to 4.0.1 and I have this fail : docker-user@Docker:~$ docker logs -f emby [s6-init] making user provided files available at /var/run/s6/etc...exited 0.[s6-init] ensuring user provided files have correct perms...exited 0. [fix-attrs.d] applying ownership & permissions fixes... [fix-attrs.d] done. [cont-init.d] executing container initialization scripts... [cont-init.d] done. [services.d] starting services [services.d] done. Info Main: Application path: /system/EmbyServer.dll Info Main: Emby Command line: /system/EmbyServer.dll -programdata /config -ffdetect /bin/ffdetect -ffmpeg /bin/ffmpeg -ffprobe /bin/ffprobe -restartexitcode 3 Operating system: Unix 4.4.0.62 64-Bit OS: True 64-Bit Process: True User Interactive: True Processor count: 4 Program data path: /config Application directory: /system Info App: Application version: 4.0.1.0 Info App: Loading assemblies Info App: File /config/plugins/OMDb.dll has version 1.0.3.0 Info App: File /system/plugins/OMDb.dll has version 1.0.3.0 Info App: File /config/plugins/OpenSubtitles.dll has version 1.0.11.0 Info App: File /system/plugins/OpenSubtitles.dll has version 1.0.11.0 Info App: File /config/plugins/MovieDb.dll has version 1.0.6.0 Info App: File /system/plugins/MovieDb.dll has version 1.0.6.0 Info App: File /config/plugins/Fanart.dll has version 1.0.2.0 Info App: File /system/plugins/Fanart.dll has version 1.0.2.0 Info App: File /config/plugins/AudioDb.dll has version 1.0.4.0 Info App: File /system/plugins/AudioDb.dll has version 1.0.4.0 Info App: File /config/plugins/StudioImages.dll has version 1.0.0.0 Info App: File /system/plugins/StudioImages.dll has version 1.0.0.0 Info App: File /config/plugins/NfoMetadata.dll has version 1.0.10.0 Info App: File /system/plugins/NfoMetadata.dll has version 1.0.10.0 Info App: File /config/plugins/Emby.Server.CinemaMode.dll has version 1.0.10.0 Info App: File /system/plugins/Emby.Server.CinemaMode.dll has version 1.0.10.0 Info App: File /config/plugins/Tvdb.dll has version 1.0.1.0 Info App: File /system/plugins/Tvdb.dll has version 1.0.1.0 Info App: File /config/plugins/MusicBrainz.dll has version 1.0.1.0 Info App: File /system/plugins/MusicBrainz.dll has version 1.0.1.0 Info App: Loading IMVDb, Version=1.0.1.0, Culture=neutral, PublicKeyToken=null from /config/plugins/IMVDb.dll Info App: Loading OMDb, Version=1.0.3.0, Culture=neutral, PublicKeyToken=null from /config/plugins/OMDb.dll Info App: Loading OpenSubtitles, Version=1.0.11.0, Culture=neutral, PublicKeyToken=null from /config/plugins/OpenSubtitles.dll Info App: Loading MovieDb, Version=1.0.6.0, Culture=neutral, PublicKeyToken=null from /config/plugins/MovieDb.dll Info App: Loading Fanart, Version=1.0.2.0, Culture=neutral, PublicKeyToken=null from /config/plugins/Fanart.dll Info App: Loading statistics, Version=2.0.5.1, Culture=neutral, PublicKeyToken=null from /config/plugins/Statistics.dll Info App: Loading Trakt, Version=3.2.1.0, Culture=neutral, PublicKeyToken=null from /config/plugins/Trakt.dll Info App: Loading AudioDb, Version=1.0.4.0, Culture=neutral, PublicKeyToken=null from /config/plugins/AudioDb.dll Info App: Loading StudioImages, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null from /config/plugins/StudioImages.dll Info App: Loading NfoMetadata, Version=1.0.10.0, Culture=neutral, PublicKeyToken=null from /config/plugins/NfoMetadata.dll Info App: Loading Emby.Kodi.SyncQueue, Version=2.0.3.0, Culture=neutral, PublicKeyToken=null from /config/plugins/Emby.Kodi.SyncQueue.dll Info App: Loading Emby.Server.CinemaMode, Version=1.0.10.0, Culture=neutral, PublicKeyToken=null from /config/plugins/Emby.Server.CinemaMode.dll Info App: Loading Tvdb, Version=1.0.1.0, Culture=neutral, PublicKeyToken=null from /config/plugins/Tvdb.dll Info App: Loading MusicBrainz, Version=1.0.1.0, Culture=neutral, PublicKeyToken=null from /config/plugins/MusicBrainz.dll Info App: Loading playback_reporting, Version=1.1.3.0, Culture=neutral, PublicKeyToken=null from /config/plugins/playback_reporting.dll Info App: Loading MediaBrowser.Api, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info App: Loading MediaBrowser.WebDashboard, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info App: Loading MediaBrowser.Model, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info App: Loading MediaBrowser.Common, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info App: Loading MediaBrowser.Controller, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info App: Loading MediaBrowser.Providers, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info App: Loading Emby.Photos, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info App: Loading Emby.Server.Implementations, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info App: Loading Emby.LiveTV, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null Info App: Loading Emby.Server.MediaEncoding, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info App: Loading Emby.Dlna, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info App: Loading MediaBrowser.LocalMetadata, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info App: Loading Emby.Notifications, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info App: Loading Emby.Codecs.Dxva, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null Info App: Loading Emby.Codecs, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null Info App: Loading Emby.Server.Connect, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info App: Loading Emby.Server.Sync, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info App: Loading EmbyServer, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info SqliteUserRepository: Sqlite version: 3.26.0 Info SqliteUserRepository: Sqlite compiler options: COMPILER=gcc-6.3.0,ENABLE_COLUMN_METADATA,ENABLE_DBSTAT_VTAB,ENABLE_FTS3_PARENTHESIS,ENABLE_FTS3_TOKENIZER,ENABLE_FTS4,ENABLE_FTS5,ENABLE_JSON1,ENABLE_PREUPDATE_HOOK,ENABLE_RTREE,ENABLE_SESSION,ENABLE_UNLOCK_NOTIFY,ENABLE_UPDATE_DELETE_LIMIT,LIKE_DOESNT_MATCH_BLOBS,MAX_SCHEMA_RETRY=25,MAX_VARIABLE_NUMBER=250000,OMIT_LOOKASIDE,SECURE_DELETE,THREADSAFE=1 Info SqliteUserRepository: Default journal_mode for /config/data/users.db is wal Info SqliteUserRepository: PRAGMA synchronous=1 Info AuthenticationRepository: Default journal_mode for /config/data/authentication.db is wal Info AuthenticationRepository: PRAGMA synchronous=1 Info ActivityRepository: Default journal_mode for /config/data/activitylog.db is wal Info ActivityRepository: PRAGMA synchronous=1 Info SqliteDisplayPreferencesRepository: Default journal_mode for /config/data/displaypreferences.db is wal Info SqliteDisplayPreferencesRepository: PRAGMA synchronous=1 Info HttpServer: Adding HttpListener prefix http://+:8096/ Info HttpServer: Adding HttpListener prefix https://+:8920/ Debug XmlSerializer: Deserializing file /config/config/users/52153e24aeb64666aa70581bdfe942be/policy.xml Info SqliteItemRepository: Default journal_mode for /config/data/library.db is wal Info SqliteItemRepository: PRAGMA synchronous=1 Info HttpServer: WS http://192.168.1.97:8096/?api_key=de12f89b864f467181c4dcf69c78b66e. UserAgent: Info HttpServer: WS http://192.168.1.97:8096/?api_key=de12f89b864f467181c4dcf69c78b66e&deviceId=C3F1577768F74589A37406BF0F9E6837. UserAgent: Error HttpServer: AcceptWebSocketAsync error *** Error Report *** Version: 4.0.1.0 Command line: /system/EmbyServer.dll -programdata /config -ffdetect /bin/ffdetect -ffmpeg /bin/ffmpeg -ffprobe /bin/ffprobe -restartexitcode 3 Operating system: Unix 4.4.0.62 64-Bit OS: True 64-Bit Process: True User Interactive: True Processor count: 4 Program data path: /config Application directory: /system System.NullReferenceException: System.NullReferenceException: Object reference not set to an instance of an object. at EmbyServer.SocketSharp.WebSocketSharpListener.ProcessWebSocketRequest(HttpListenerContext ctx) Source: EmbyServer TargetSite: Void MoveNext() at EmbyServer.SocketSharp.WebSocketSharpListener.ProcessWebSocketRequest(HttpListenerContext ctx) Can you help me? Thanks thomas

After upgrading to 4.0.1.0 I have noticed that my docker container crashes fairly frequently (once a day) with the following error while browsing my libraries using a web browser: "System.IO.IOException: System.IO.IOException: Unable to read data from the transport connection: Connection reset by peer. ---> System.Net.Sockets.SocketException: Connection reset by peer" Thanks server log.txt

Hi I am using Emby 4.0.1.0 in Docker on Debian Stretch. Since the last update the Playing next episode feature is not working. I only found a topic for nvidia shield, somewhat describing this problem: https://emby.media/community/index.php?/topic/68427-play-next-episode-automatically-not-working-anymore-on-shield/page-2?hl=%2Bplaying+%2Bnext+%2Bepisode&do=findComment&comment=684502 * The feature is enabled for my user and the popup is showing. * If I click on the popup "start now", it will work, if I wait for it to do automatically it will end in a never ending loading circle. * I disabled hardware transcoding, still no difference * Does not work for both old and freshly imported files. * Switching to an older docker container still exhibits this behaviour How can I debug this further? Best Conrad embylog_sane.txt

Hello all, I've been a long time emby premier user, and I'm trying to "upgrade" my setup a bit. Here's the basics of what I have: Supermico X9SCL-F Motherboard Xeon E3-1275 V2 Processor Unraid 6.6.6 Emby 4.0.1.0 using the Emby Docker from the Emby Repo in Unraid I can't find any info regarding compatibility of IQSV and the mobo (I've reached out to Supermico via email, who knows how long their reply will take), I know the processor has the ability, in emby, I can't get IQSV to work. On the transcoding page, if I choose Advanced under enable hardware acceleration, no options show up. If I have it on Yes, I see software decoding in the dashboard and all my cores are at 98%+. I'm reaching out to the community here to see if there's any way I can get IQSV to work to ease the burden of transcoding since I'm upgrading my video library to a lot of 4K content, and want to continue to be able to watch it from outside my home on my phone or laptop (I use Kodi in my home, so there's absolutely no need for IQSV for local viewing). I'm a bit of a novice when it comes to anything outside of the GUI, but am comfortable messing with CLI if I have instructions. I'm not sure if I posted this in the right place or if I need to provide any additional information, if anybody can give me some direction it would be greatly appreciated!

Hello, I'm sorry, but I could not figure where to report bugs/issues with the docker: emby/embyserver image? So, I'm posting it here the bug is with the emby/embyserver:4.0.1.0 I've created a CentOS VM using VirtualBox. after that, I've followed the docker installation guide mentioned on docker.com then added my shared folders from [host] to [guest] with the read/write permissions of course. the problem is that the docker emby image, crashes and exit, if the '/config' location was pointed to a shared-folder from the [host]. even if it has the correct permissions! and here is some information: [host] Distro that is running VirtualBox: [deadsoul@workstation ~]$ cat /etc/redhat-release Mageia release 6 (Official) for x86_64 [deadsoul@workstation ~]$ uname -a Linux workstation.hom 4.14.89-server-1.mga6 #1 SMP Mon Dec 17 15:00:02 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux [deadsoul@workstation ~]$ cat /proc/version Linux version 4.14.89-server-1.mga6 (iurt@scwx861.mageia.org) (gcc version 5.5.0 (Mageia 5.5.0-1.mga6)) #1 SMP Mon Dec 17 15:00:02 UTC 2018 [deadsoul@workstation ~]$ cat /etc/mageia-release Mageia release 6 (Official) for x86_64 [deadsoul@workstation ~]$ [host] VirtualBox info: [deadsoul@workstation ~]$ VBoxHeadless --version Oracle VM VirtualBox Headless Interface 5.2.22 (C) 2008-2018 Oracle Corporation All rights reserved. 5.2.22r126257 [deadsoul@workstation ~]$ /sbin/modinfo vboxnetadp filename: /lib/modules/4.14.89-server-1.mga6/dkms-binary/3rdparty/vbox/vboxnetadp.ko.xz version: 5.2.22 r126257 ((0xA2CDe001U)) license: GPL description: Oracle VM VirtualBox Network Adapter Driver author: Oracle Corporation srcversion: 29B5552C5D92B8323EE00BD depends: vboxdrv name: vboxnetadp vermagic: 4.14.89-server-1.mga6 SMP mod_unload [deadsoul@workstation ~]$ /sbin/modinfo vboxnetflt filename: /lib/modules/4.14.89-server-1.mga6/dkms-binary/3rdparty/vbox/vboxnetflt.ko.xz version: 5.2.22 r126257 ((0xA2CDe001U)) license: GPL description: Oracle VM VirtualBox Network Filter Driver author: Oracle Corporation srcversion: 59BC88F16B267340502BA6B depends: vboxdrv name: vboxnetflt vermagic: 4.14.89-server-1.mga6 SMP mod_unload [deadsoul@workstation ~]$ /sbin/modinfo vboxdrv filename: /lib/modules/4.14.89-server-1.mga6/dkms-binary/3rdparty/vbox/vboxdrv.ko.xz version: 5.2.22 r126257 (0x00290001) license: GPL description: Oracle VM VirtualBox Support Driver author: Oracle Corporation srcversion: D24FE4B53DF0D2A2995E45D depends: name: vboxdrv vermagic: 4.14.89-server-1.mga6 SMP mod_unload parm: force_async_tsc:force the asynchronous TSC mode (int) [deadsoul@workstation ~]$ [guest] Distro that is running docker info: [root@wsvmdockertest CentOS]# cat /etc/redhat-release CentOS Linux release 7.6.1810 (Core) [root@wsvmdockertest CentOS]# uname -a Linux wsvmdockertest.hom 3.10.0-957.1.3.el7.x86_64 #1 SMP Thu Nov 29 14:49:43 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux [root@wsvmdockertest CentOS]# cat /proc/version Linux version 3.10.0-957.1.3.el7.x86_64 (mockbuild@kbuilder.bsys.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-36) (GCC) ) #1 SMP Thu Nov 29 14:49:43 UTC 2018 [root@wsvmdockertest CentOS]# [guest] VirtualBox guest additions info: [root@wsvmdockertest CentOS]# modinfo vboxguest filename: /lib/modules/3.10.0-957.1.3.el7.x86_64/misc/vboxguest.ko version: 5.2.14 r123301 license: GPL description: Oracle VM VirtualBox Guest Additions for Linux Module author: Oracle Corporation retpoline: Y rhelversion: 7.6 srcversion: 87A2347C02617B1A8239C8B alias: pci:v000080EEd0000CAFEsv00000000sd00000000bc*sc*i* depends: vermagic: 3.10.0-957.1.3.el7.x86_64 SMP mod_unload modversions [root@wsvmdockertest CentOS]# modinfo vboxsf filename: /lib/modules/3.10.0-957.1.3.el7.x86_64/misc/vboxsf.ko version: 5.2.14 r123301 alias: fs-vboxsf license: GPL author: Oracle Corporation description: Oracle VM VirtualBox VFS Module for Host File System Access retpoline: Y rhelversion: 7.6 srcversion: E55F865E93C04E4FFB34C09 depends: vboxguest vermagic: 3.10.0-957.1.3.el7.x86_64 SMP mod_unload modversions parm: follow_symlinks:Let host resolve symlinks rather than showing them (int) [root@wsvmdockertest CentOS]# [guest] Docker info: [root@wsvmdockertest CentOS]# docker --version Docker version 18.09.1, build 4c52b90 [root@wsvmdockertest CentOS]# docker info Containers: 1 Running: 0 Paused: 0 Stopped: 1 Images: 3 Server Version: 18.09.1 Storage Driver: overlay2 Backing Filesystem: xfs Supports d_type: true Native Overlay Diff: true Logging Driver: json-file Cgroup Driver: cgroupfs Plugins: Volume: local Network: bridge host macvlan null overlay Log: awslogs fluentd gcplogs gelf journald json-file local logentries splunk syslog Swarm: inactive Runtimes: runc Default Runtime: runc Init Binary: docker-init containerd version: 9754871865f7fe2f4e74d43e2fc7ccd237edcbce runc version: 96ec2177ae841256168fcf76954f7177af9446eb init version: fec3683 Security Options: seccomp Profile: default Kernel Version: 3.10.0-957.1.3.el7.x86_64 Operating System: CentOS Linux 7 (Core) OSType: linux Architecture: x86_64 CPUs: 16 Total Memory: 7.636GiB Name: wsvmdockertest.hom ID: 4YXA:ZX3N:ACS2:CEEV:S2B6:5PCS:FRMW:H4ES:QYAQ:AXDK:MPT2:5FN7 Docker Root Dir: /var/lib/docker Debug Mode (client): false Debug Mode (server): false Registry: https://index.docker.io/v1/ Labels: Experimental: false Insecure Registries: 127.0.0.0/8 Live Restore Enabled: false Product License: Community Engine [root@wsvmdockertest CentOS]# docker version Client: Version: 18.09.1 API version: 1.39 Go version: go1.10.6 Git commit: 4c52b90 Built: Wed Jan 9 19:35:01 2019 OS/Arch: linux/amd64 Experimental: false Server: Docker Engine - Community Engine: Version: 18.09.1 API version: 1.39 (minimum version 1.12) Go version: go1.10.6 Git commit: 4c52b90 Built: Wed Jan 9 19:06:30 2019 OS/Arch: linux/amd64 Experimental: false [root@wsvmdockertest CentOS]# [guest] Shared folder info: [root@wsvmdockertest CentOS]# mount | grep /dockers Dockers on /dockers type vboxsf (rw,nodev,relatime) [root@wsvmdockertest CentOS]# grep Dockers /etc/fstab Dockers /dockers vboxsf uid=1000,gid=1000,rw 0 0 [root@wsvmdockertest CentOS]# ls -lahn /dockers/emby/config-v4/ total 0 drwxr-xr-x. 1 1000 1000 132 Jan 27 04:39 . drwxr-xr-x. 1 1000 1000 96 Jan 27 04:22 .. drwxr-xr-x. 1 1000 1000 272 Jan 25 13:58 cache drwxr-xr-x. 1 1000 1000 116 Jan 25 01:45 config drwxr-xr-x. 1 1000 1000 708 Jan 25 09:23 data drwxr-xr-x. 1 1000 1000 448 Jan 25 01:41 localization drwxr-xr-x. 1 1000 1000 2.0K Jan 27 04:33 logs drwxr-xr-x. 1 1000 1000 50 Jan 25 09:24 metadata drwxr-xr-x. 1 1000 1000 186 Jan 25 01:45 plugins drwxr-xr-x. 1 1000 1000 14 Jan 25 01:41 root drwxr-xr-x. 1 1000 1000 0 Jan 25 01:46 transcoding-temp [root@wsvmdockertest CentOS]# id 1000 uid=1000(deadsoul) gid=1000(deadsoul) groups=1000(deadsoul),991(vboxsf) [root@wsvmdockertest CentOS]# find /dockers/emby/config-v4/ -uid 1000 -a -gid 1000 | wc -l 63908 [root@wsvmdockertest CentOS]# find /dockers/emby/config-v4/ | wc -l 63908 [root@wsvmdockertest CentOS]# find /dockers/emby/config-v4/ -not -uid 1000 -o -not -gid 1000 | wc -l 0 [guest] Docker run command: docker pull emby/embyserver:4.0.1.0 docker run -d \ --network physical_nw \ --ip 192.168.1.114 \ --hostname "emby-v4.hom" \ --mac-address "00:11:22:33:01:14" \ --volume /dockers/emby/config-v4:/config \ --volume /mnt/Media:/mnt/Media \ --volume /dockers/emby/backup-v4:/mnt/Backups \ --publish 8096:8096 \ --publish 8920:8920 \ --env UID=1000 \ --env GID=1000 \ --env GIDLIST=100,39 \ --restart unless-stopped \ --name emby-v4 \ -it emby/embyserver:4.0.1.0 sh [guest] Docker run logs: [s6-init] making user provided files available at /var/run/s6/etc...exited 0. [s6-init] ensuring user provided files have correct perms...exited 0. [fix-attrs.d] applying ownership & permissions fixes... [fix-attrs.d] done. [cont-init.d] executing container initialization scripts... [cont-init.d] done. [services.d] starting services [services.d] done. / # Info Main: Application path: /system/EmbyServer.dll Info Main: Emby Command line: /system/EmbyServer.dll -programdata /config -ffdetect /bin/ffdetect -ffmpeg /bin/ffmpeg -ffprobe /bin/ffprobe -restartexitcode 3 Operating system: Unix 3.10.0.957 64-Bit OS: True 64-Bit Process: True User Interactive: True Processor count: 16 Program data path: /config Application directory: /system Info App: Application version: 4.0.1.0 Info App: Loading assemblies Info App: File /config/plugins/AudioDb.dll has version 1.0.4.0 Info App: File /system/plugins/AudioDb.dll has version 1.0.4.0 Info App: File /config/plugins/Emby.Server.CinemaMode.dll has version 1.0.10.0 Info App: File /system/plugins/Emby.Server.CinemaMode.dll has version 1.0.10.0 Info App: File /config/plugins/Fanart.dll has version 1.0.2.0 Info App: File /system/plugins/Fanart.dll has version 1.0.2.0 Info App: File /config/plugins/MovieDb.dll has version 1.0.6.0 Info App: File /system/plugins/MovieDb.dll has version 1.0.6.0 Info App: File /config/plugins/MusicBrainz.dll has version 1.0.1.0 Info App: File /system/plugins/MusicBrainz.dll has version 1.0.1.0 Info App: File /config/plugins/NfoMetadata.dll has version 1.0.10.0 Info App: File /system/plugins/NfoMetadata.dll has version 1.0.10.0 Info App: File /config/plugins/OMDb.dll has version 1.0.3.0 Info App: File /system/plugins/OMDb.dll has version 1.0.3.0 Info App: File /config/plugins/OpenSubtitles.dll has version 1.0.11.0 Info App: File /system/plugins/OpenSubtitles.dll has version 1.0.11.0 Info App: File /config/plugins/StudioImages.dll has version 1.0.0.0 Info App: File /system/plugins/StudioImages.dll has version 1.0.0.0 Info App: File /config/plugins/Tvdb.dll has version 1.0.1.0 Info App: File /system/plugins/Tvdb.dll has version 1.0.1.0 Info App: Loading AudioDb, Version=1.0.4.0, Culture=neutral, PublicKeyToken=null from /config/plugins/AudioDb.dll Info App: Loading AutoBoxSets, Version=1.2.2.0, Culture=neutral, PublicKeyToken=null from /config/plugins/AutoBoxSets.dll Info App: Loading Emby.Server.CinemaMode, Version=1.0.10.0, Culture=neutral, PublicKeyToken=null from /config/plugins/Emby.Server.CinemaMode.dll Info App: Loading Fanart, Version=1.0.2.0, Culture=neutral, PublicKeyToken=null from /config/plugins/Fanart.dll Info App: Loading IMVDb, Version=1.0.5.0, Culture=neutral, PublicKeyToken=null from /config/plugins/IMVDb.dll Info App: Loading MBBackup, Version=1.3.4.0, Culture=neutral, PublicKeyToken=null from /config/plugins/MBBackup.dll Info App: Loading MovieDb, Version=1.0.6.0, Culture=neutral, PublicKeyToken=null from /config/plugins/MovieDb.dll Info App: Loading MusicBrainz, Version=1.0.1.0, Culture=neutral, PublicKeyToken=null from /config/plugins/MusicBrainz.dll Info App: Loading NfoMetadata, Version=1.0.10.0, Culture=neutral, PublicKeyToken=null from /config/plugins/NfoMetadata.dll Info App: Loading OMDb, Version=1.0.3.0, Culture=neutral, PublicKeyToken=null from /config/plugins/OMDb.dll Info App: Loading OpenSubtitles, Version=1.0.11.0, Culture=neutral, PublicKeyToken=null from /config/plugins/OpenSubtitles.dll Info App: Loading StudioImages, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null from /config/plugins/StudioImages.dll Info App: Loading Tvdb, Version=1.0.1.0, Culture=neutral, PublicKeyToken=null from /config/plugins/Tvdb.dll Info App: Loading MediaBrowser.Api, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info App: Loading MediaBrowser.WebDashboard, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info App: Loading MediaBrowser.Model, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info App: Loading MediaBrowser.Common, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info App: Loading MediaBrowser.Controller, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info App: Loading MediaBrowser.Providers, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info App: Loading Emby.Photos, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info App: Loading Emby.Server.Implementations, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info App: Loading Emby.LiveTV, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null Info App: Loading Emby.Server.MediaEncoding, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info App: Loading Emby.Dlna, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info App: Loading MediaBrowser.LocalMetadata, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info App: Loading Emby.Notifications, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info App: Loading Emby.Codecs.Dxva, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null Info App: Loading Emby.Codecs, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null Info App: Loading Emby.Server.Connect, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info App: Loading Emby.Server.Sync, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info App: Loading EmbyServer, Version=4.0.1.0, Culture=neutral, PublicKeyToken=null Info SqliteUserRepository: Sqlite version: 3.26.0 Info SqliteUserRepository: Sqlite compiler options: COMPILER=gcc-6.3.0,ENABLE_COLUMN_METADATA,ENABLE_DBSTAT_VTAB,ENABLE_FTS3_PARENTHESIS,ENABLE_FTS3_TOKENIZER,ENABLE_FTS4,ENABLE_FTS5,ENABLE_JSON1,ENABLE_PREUPDATE_HOOK,ENABLE_RTREE,ENABLE_SESSION,ENABLE_UNLOCK_NOTIFY,ENABLE_UPDATE_DELETE_LIMIT,LIKE_DOESNT_MATCH_BLOBS,MAX_SCHEMA_RETRY=25,MAX_VARIABLE_NUMBER=250000,OMIT_LOOKASIDE,SECURE_DELETE,THREADSAFE=1 Error Main: Error in appHost.Init *** Error Report *** Version: 4.0.1.0 Command line: /system/EmbyServer.dll -programdata /config -ffdetect /bin/ffdetect -ffmpeg /bin/ffmpeg -ffprobe /bin/ffprobe -restartexitcode 3 Operating system: Unix 3.10.0.957 64-Bit OS: True 64-Bit Process: True User Interactive: True Processor count: 16 Program data path: /config Application directory: /system SQLitePCL.pretty.SQLiteException: IOError: disk I/O error SQLitePCL.pretty.SQLiteException: Exception of type 'SQLitePCL.pretty.SQLiteException' was thrown. at SQLitePCL.pretty.SQLiteException.CheckOk(sqlite3 db, Int32 rc) at SQLitePCL.pretty.SQLiteDatabaseConnection.PrepareStatement(String sql, String& tail) at SQLitePCL.pretty.DatabaseConnection.PrepareStatement(IDatabaseConnection This, String sql) at System.Linq.Enumerable.SelectEnumerableIterator`2.MoveNext() at System.Linq.Enumerable.TryGetFirst[TSource](IEnumerable`1 source, Boolean& found) at System.Linq.Enumerable.First[TSource](IEnumerable`1 source) at Emby.Sqlite.BaseSqliteRepository.CreateConnection(Boolean isReadOnly) at Emby.Server.Implementations.Data.SqliteUserRepository.Initialize() at Emby.Server.Implementations.ApplicationHost.GetUserRepository() at Emby.Server.Implementations.ApplicationHost.RegisterResources(FfmpegConfiguration ffmpegInfo) at Emby.Server.Implementations.ApplicationHost.Init() at EmbyServer.Program.InitAppHost(CoreAppHost appHost, ILogger logger) Source: SQLitePCL.pretty TargetSite: Void CheckOk(SQLitePCL.sqlite3, Int32) at SQLitePCL.pretty.SQLiteException.CheckOk(sqlite3 db, Int32 rc) at SQLitePCL.pretty.SQLiteDatabaseConnection.PrepareStatement(String sql, String& tail) at SQLitePCL.pretty.DatabaseConnection.PrepareStatement(IDatabaseConnection This, String sql) at System.Linq.Enumerable.SelectEnumerableIterator`2.MoveNext() at System.Linq.Enumerable.TryGetFirst[TSource](IEnumerable`1 source, Boolean& found) at System.Linq.Enumerable.First[TSource](IEnumerable`1 source) at Emby.Sqlite.BaseSqliteRepository.CreateConnection(Boolean isReadOnly) at Emby.Server.Implementations.Data.SqliteUserRepository.Initialize() at Emby.Server.Implementations.ApplicationHost.GetUserRepository() at Emby.Server.Implementations.ApplicationHost.RegisterResources(FfmpegConfiguration ffmpegInfo) at Emby.Server.Implementations.ApplicationHost.Init() at EmbyServer.Program.InitAppHost(CoreAppHost appHost, ILogger logger) Error Main: UnhandledException *** Error Report *** Version: 4.0.1.0 Command line: /system/EmbyServer.dll -programdata /config -ffdetect /bin/ffdetect -ffmpeg /bin/ffmpeg -ffprobe /bin/ffprobe -restartexitcode 3 Operating system: Unix 3.10.0.957 64-Bit OS: True 64-Bit Process: True User Interactive: True Processor count: 16 Program data path: /config Application directory: /system SQLitePCL.pretty.SQLiteException: IOError: disk I/O error SQLitePCL.pretty.SQLiteException: Exception of type 'SQLitePCL.pretty.SQLiteException' was thrown. at SQLitePCL.pretty.SQLiteException.CheckOk(sqlite3 db, Int32 rc) at SQLitePCL.pretty.SQLiteDatabaseConnection.PrepareStatement(String sql, String& tail) at SQLitePCL.pretty.DatabaseConnection.PrepareStatement(IDatabaseConnection This, String sql) at System.Linq.Enumerable.SelectEnumerableIterator`2.MoveNext() at System.Linq.Enumerable.TryGetFirst[TSource](IEnumerable`1 source, Boolean& found) at System.Linq.Enumerable.First[TSource](IEnumerable`1 source) at Emby.Sqlite.BaseSqliteRepository.CreateConnection(Boolean isReadOnly) at Emby.Server.Implementations.Data.SqliteUserRepository.Initialize() at Emby.Server.Implementations.ApplicationHost.GetUserRepository() at Emby.Server.Implementations.ApplicationHost.RegisterResources(FfmpegConfiguration ffmpegInfo) at Emby.Server.Implementations.ApplicationHost.Init() at EmbyServer.Program.InitAppHost(CoreAppHost appHost, ILogger logger) at EmbyServer.Program.RunApplication(ServerApplicationPaths appPaths, ILogManager logManager, IEnvironmentInfo environmentInfo, StartupOptions options) at EmbyServer.Program.Main(String[] args) Source: SQLitePCL.pretty TargetSite: Void CheckOk(SQLitePCL.sqlite3, Int32) at SQLitePCL.pretty.SQLiteException.CheckOk(sqlite3 db, Int32 rc) at SQLitePCL.pretty.SQLiteDatabaseConnection.PrepareStatement(String sql, String& tail) at SQLitePCL.pretty.DatabaseConnection.PrepareStatement(IDatabaseConnection This, String sql) at System.Linq.Enumerable.SelectEnumerableIterator`2.MoveNext() at System.Linq.Enumerable.TryGetFirst[TSource](IEnumerable`1 source, Boolean& found) at System.Linq.Enumerable.First[TSource](IEnumerable`1 source) at Emby.Sqlite.BaseSqliteRepository.CreateConnection(Boolean isReadOnly) at Emby.Server.Implementations.Data.SqliteUserRepository.Initialize() at Emby.Server.Implementations.ApplicationHost.GetUserRepository() at Emby.Server.Implementations.ApplicationHost.RegisterResources(FfmpegConfiguration ffmpegInfo) at Emby.Server.Implementations.ApplicationHost.Init() at EmbyServer.Program.InitAppHost(CoreAppHost appHost, ILogger logger) at EmbyServer.Program.RunApplication(ServerApplicationPaths appPaths, ILogManager logManager, IEnvironmentInfo environmentInfo, StartupOptions options) at EmbyServer.Program.Main(String[] args) UnhandledException SQLitePCL.pretty.SQLiteException: IOError: disk I/O error SQLitePCL.pretty.SQLiteException: Exception of type 'SQLitePCL.pretty.SQLiteException' was thrown. at SQLitePCL.pretty.SQLiteException.CheckOk(sqlite3 db, Int32 rc) at SQLitePCL.pretty.SQLiteDatabaseConnection.PrepareStatement(String sql, String& tail) at SQLitePCL.pretty.DatabaseConnection.PrepareStatement(IDatabaseConnection This, String sql) at System.Linq.Enumerable.SelectEnumerableIterator`2.MoveNext() at System.Linq.Enumerable.TryGetFirst[TSource](IEnumerable`1 source, Boolean& found) at System.Linq.Enumerable.First[TSource](IEnumerable`1 source) at Emby.Sqlite.BaseSqliteRepository.CreateConnection(Boolean isReadOnly) at Emby.Server.Implementations.Data.SqliteUserRepository.Initialize() at Emby.Server.Implementations.ApplicationHost.GetUserRepository() at Emby.Server.Implementations.ApplicationHost.RegisterResources(FfmpegConfiguration ffmpegInfo) at Emby.Server.Implementations.ApplicationHost.Init() at EmbyServer.Program.InitAppHost(CoreAppHost appHost, ILogger logger) at EmbyServer.Program.RunApplication(ServerApplicationPaths appPaths, ILogManager logManager, IEnvironmentInfo environmentInfo, StartupOptions options) at EmbyServer.Program.Main(String[] args) Source: SQLitePCL.pretty TargetSite: Void CheckOk(SQLitePCL.sqlite3, Int32) at SQLitePCL.pretty.SQLiteException.CheckOk(sqlite3 db, Int32 rc) at SQLitePCL.pretty.SQLiteDatabaseConnection.PrepareStatement(String sql, String& tail) at SQLitePCL.pretty.DatabaseConnection.PrepareStatement(IDatabaseConnection This, String sql) at System.Linq.Enumerable.SelectEnumerableIterator`2.MoveNext() at System.Linq.Enumerable.TryGetFirst[TSource](IEnumerable`1 source, Boolean& found) at System.Linq.Enumerable.First[TSource](IEnumerable`1 source) at Emby.Sqlite.BaseSqliteRepository.CreateConnection(Boolean isReadOnly) at Emby.Server.Implementations.Data.SqliteUserRepository.Initialize() at Emby.Server.Implementations.ApplicationHost.GetUserRepository() at Emby.Server.Implementations.ApplicationHost.RegisterResources(FfmpegConfiguration ffmpegInfo) at Emby.Server.Implementations.ApplicationHost.Init() at EmbyServer.Program.InitAppHost(CoreAppHost appHost, ILogger logger) at EmbyServer.Program.RunApplication(ServerApplicationPaths appPaths, ILogManager logManager, IEnvironmentInfo environmentInfo, StartupOptions options) at EmbyServer.Program.Main(String[] args) [cont-finish.d] executing container finish scripts... [cont-finish.d] done. [s6-finish] syncing disks. [s6-finish] sending all processes the TERM signal. [s6-finish] sending all processes the KILL signal and exiting.

Hi, I'm running emby as a docker container under the following system: Linux openmediavault 4.9.0-0.bpo.6-amd64 #1 SMP Debian 4.9.88-1+deb9u1~bpo8+1 (2018-05-13) x86_64 GNU/Linux Docker version 17.05.0-ce, build 89658be latest emby docker It crashes quite regularly (every 1-3 days, running 24/7). docker logs emby: Aborted s6-svscanctl: fatal: unable to control /var/run/s6/services: supervisor not listening [cont-finish.d] executing container finish scripts... [cont-finish.d] done. [s6-finish] syncing disks. [s6-finish] sending all processes the TERM signal. [s6-finish] sending all processes the KILL signal and exiting. Any idea what could be the cause here and how to go on with debugging?

On the latest versions (3.6+), whenever I have more than one instance of emby running in docker, none of them work properly. The web ui doesn't respond, often takes too long to load and is generally unusable. It's almost like something is interfering between the different instances. As soon as I stop all dockers but one, it works flawlessly. I've made sure that every instance uses a different location for config and different ports. EDIT: I noticed that connect.txt in the data folder has the same value for both docker instances. Note that both docker containers are newly created and I haven't reused any data from one or the other. Could that explain the problem?

Hi all, I've just updated my CUDA drivers to version 10 and I cannot get transcoding to work. I'm running emby (currently version 4.0.0.1) in Docker with the following Dockerfile FROM alpine:latest AS builder ARG VERSION=3.6.0.46 RUN apk update \ && apk add wget ca-certificates \ && wget --progress=bar:force -O /emby.deb \ https://github.com/MediaBrowser/Emby.Releases/releases/download/${VERSION}/emby-server-deb_${VERSION}_amd64.deb FROM nvidia/video-codec-sdk:8.2-ubuntu18.04 COPY --from=builder /emby.deb /emby.deb RUN (dpkg -i /emby.deb ; true) \ && echo /opt/emby-server/lib/ >> /etc/ld.so.conf \ && echo /opt/emby-server/lib/samba >> /etc/ld.so.conf \ && ldconfig ENTRYPOINT ["/opt/emby-server/bin/emby-server"] Logs embyserver.txt https://pastebin.com/8KTsdNUB hardware_detection.txt https://pastebin.com/xT52f9F1 ffmpeg-transcode https://pastebin.com/5wCQ9D6s Any clues why this might not work? executing ffmpeg in containers returns the following: root@259f4dbd38a3:/# /opt/emby-server/bin/ffmpeg ffmpeg version 4.0.2-emby_2018_12_09 Copyright (c) 2000-2018 the FFmpeg developers built with gcc 6.3.0 (crosstool-NG crosstool-ng-1.23.0) configuration: --cc=x86_64-pc-linux-gnu-gcc --arch=x86_64 --prefix=/home/embybuilder/Buildbot/x64/ffmpeg-x64/staging --pkg-config=pkg-config --disable-doc --disable-ffplay --disable-vdpau --disable-xlib --enable-fontconfig --enable-gnutls --enable-gpl --enable-iconv --enable-libass --enable-libfreetype --enable-libfribidi --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libwebp --enable-libx264 --enable-libzvbi --enable-version3 --enable-libsmbclient --enable-cuda --enable-cuvid --enable-libmfx --enable-nvenc --enable-vaapi --enable-cross-compile --cross-prefix=x86_64-pc-linux-gnu- --extra-libs='-lexpat -lfreetype -lfribidi -lfontconfig -liconv -lpng -lz -lvorbis -logg -lnettle -lhogweed -lgmp -laddns-samba4 -lasn1util-samba4 -lauthkrb5-samba4 -lCHARSET3-samba4 -lcliauth-samba4 -lcli-cldap-samba4 -lcli-ldap-common-samba4 -lcli-nbt-samba4 -lcli-smb-common-samba4 -lcom_err -lcommon-auth-samba4 -ldbwrap-samba4 -ldcerpc-binding -ldcerpc-samba-samba4 -ldl -lflag-mapping-samba4 -lgenrand-samba4 -lgensec-samba4 -lgse-samba4 -lgssapi_krb5 -llibcli-lsa3-samba4 -llibsmb-samba4 -linterfaces-samba4 -liov-buf-samba4 -lk5crypto -lkrb5 -lkrb5samba-samba4 -lkrb5support -lldb -lldbsamba-samba4 -lmessages-dgm-samba4 -lmessages-util-samba4 -lmsghdr-samba4 -lmsrpc3-samba4 -lndr -lndr-krb5pac -lndr-nbt -lndr-samba-samba4 -lndr-standard -lreplace-samba4 -lsamba-cluster-support-samba4 -lsamba-credentials -lsamba-debug-samba4 -lsamba-errors -lsamba-hostconfig -lsamba-modules-samba4 -lsamba-security-samba4 -lsamba-sockets-samba4 -lsamba-util -lsamba3-util-samba4 -lsamdb -lsamdb-common-samba4 -lsecrets3-samba4 -lserver-id-db-samba4 -lserver-role-samba4 -lsmbconf -lsmbd-shim-samba4 -lsmb-transport-samba4 -lsocket-blocking-samba4 -lsys-rw-samba4 -ltalloc -ltalloc-report-samba4 -ltdb -ltdb-wrap-samba4 -ltevent -ltevent-util -ltime-basic-samba4 -lutil-cmdline-samba4 -lutil-reg-samba4 -lutil-setid-samba4 -lutil-tdb-samba4 -luuid -lwbclient -lwinbind-client-samba4 -ldrm' --target-os=linux --enable-shared --disable-static libavutil 56. 14.100 / 56. 14.100 libavcodec 58. 18.100 / 58. 18.100 libavformat 58. 12.100 / 58. 12.100 libavdevice 58. 3.100 / 58. 3.100 libavfilter 7. 16.100 / 7. 16.100 libswscale 5. 1.100 / 5. 1.100 libswresample 3. 1.100 / 3. 1.100 libpostproc 55. 1.100 / 55. 1.100 Hyper fast Audio and Video encoder usage: ffmpeg [options] [[infile options] -i infile]... {[outfile options] outfile}... Use -h to get full help or, even better, run 'man ffmpeg' I'm 100% certain hardware acceleration is not working since that's easy to verify with e.g. nvidia-smi (when I launch ffmpeg with hw accel on host it spikes to 100% whereas it doesn't budge when I launch a movie with specified quality different than the original)

Hello, i am running Emby server in Docker on Orange Pi PC Plus (armbian bionic - mainline kernel 4.14.y). Thats how i run container: root@orangepipcplus:/mnt/STORAGE/Emby# docker run -d \ --name emby \ --volume /mnt/STORAGE/Emby/config:/config \ --volume /mnt/STORAGE/Downloads:/mnt/Downloads \ --device /dev/dri/card0:/dev/dri/renderD128 \ --network host \ --env UID=1001 \ --env GID=1002 \ emby/embyserver_arm32v7:latest UID=1001 - emby user; GID=1002 - emby group; emby user added to video group; /dev/dri: by-path card0 ffmpeg log in attached files. HW transcoding not working, help please.

I´m trying to install emby in docker. I have plex already running in docker (planned to install both simultaniously then choose whatever i turn out to like better). But I cannot install the emby image, because it only comes up with this [max@[member="Max"] ~]$ sudo docker run -d \ > --name=emby \ > -v /home/max/raid6/Media/Music:/data/music \ > -v /home/max/emby_config:/config \ > -v /home/max/raid6/Media/Animes:/data/animes \ > -v /home/max/raid6/Media/AnimeMovies:/data/anime_movies \ > -v /home/max/raid6/Media/Movies:/data/movies \ > -v /home/max/raid6/Media/TV Shows:/data/tv_shows \ > --publish 8096:8096 \ > --publish 8920:8920 \ > --env UID=1000 \ > --env GID=1000 \ emby/embyserver:latest docker: invalid reference format. See 'docker run --help'. So this part is the error message I get docker: invalid reference format. See 'docker run --help'. The rest is command I was running to try and run the container. Now I know this line in the docker guide I left out --device /dev/dri/renderD128 \ # To mount a render node for VAAPI I had it in there before, but I left it out now because I figured maybe that´s the problem. And it does not state that it´s mandatory in the guide. Pulling the image works however. [max@[member="Max"] ~]$ sudo docker pull emby/embyserver:latest [sudo] password for max: latest: Pulling from emby/embyserver Digest: sha256:6aa2dbfb6b9a109aeae58b72c8453bd194bfe346f5244453d046d79a9c35c2b8 Status: Image is up to date for emby/embyserver:latest But I can´t get it to actually run.