Jump to content

New QNAP Package for Testing

Luke

By Luke
in QNAP

 Share

Recommended Posts

BradJMelb

BradJMelb   3

Posted
Posted

Has anyone has any success with running the latest builds (I'm trying 3.3.1.0) on an older QNAP NAS that's running an x86 firmware? I'm bringing my parents out of the dark ages and finally decommissioning their W7 PC running a stand alone install of MediaBrowser 2.

They have a TS-439 Pro II+ with QTS 4.2.6 which is the latest FW as this NAS is EOL. I know this is an old underpowered NAS but they have a 2017 LG C7 OLED so all the content will be direct playing.

 

Back on page 2 there was talk about running on x86 firmwares, but I can't see anything mentioned recently. I installed the app and it didn't complain at all. The app centre says it's running but it's not really.

 

If I try and start the process manually I get this error:

/etc/init.d/emby-server.sh start

[/share/MD0_DATA/.qpkg/EmbyServer] # /share/MD0_DATA/.qpkg/EmbyServer/system/EmbyServer: error while loading shared libraries: libdl.so.2: wrong ELF class: ELFCLASS32

 
Is this a lost cause or has anyone managed to get this up and running?
 
Thanks everyone,
Brad.
Link to comment
Share on other sites
Luke Emby Team

Luke   37235

Posted
  • Author
Posted

 

Has anyone has any success with running the latest builds (I'm trying 3.3.1.0) on an older QNAP NAS that's running an x86 firmware? I'm bringing my parents out of the dark ages and finally decommissioning their W7 PC running a stand alone install of MediaBrowser 2.

They have a TS-439 Pro II+ with QTS 4.2.6 which is the latest FW as this NAS is EOL. I know this is an old underpowered NAS but they have a 2017 LG C7 OLED so all the content will be direct playing.

 

Back on page 2 there was talk about running on x86 firmwares, but I can't see anything mentioned recently. I installed the app and it didn't complain at all. The app centre says it's running but it's not really.

 

If I try and start the process manually I get this error:

/etc/init.d/emby-server.sh start

[/share/MD0_DATA/.qpkg/EmbyServer] # /share/MD0_DATA/.qpkg/EmbyServer/system/EmbyServer: error while loading shared libraries: libdl.so.2: wrong ELF class: ELFCLASS32

 
Is this a lost cause or has anyone managed to get this up and running?
 
Thanks everyone,
Brad.

 

 

This package is for x64 only. For x86 you need to use the QNAP community package. Instructions can be found on our website:

https://emby.media/download

 

Thanks.

Link to comment
Share on other sites
BradJMelb

BradJMelb   3

Posted
Posted

This package is for x64 only. For x86 you need to use the QNAP community package. Instructions can be found on our website:

https://emby.media/download

 

Thanks.

 

Thanks Luke, I thought this release may have been for x86 as there was initial talk about it. To help out other users would it be worthwhile updating the download page to mention X86 as well as ARM for Stephane's version?

 

I'll give it a go and post there if I have troubles.

 

Cheers.

Link to comment
Share on other sites
jdfoster

jdfoster   0

Posted
Posted

Just a heads up, I've removed the link from the first post and going forward you can find this package from the download page of our website:

 

https://emby.media/download

 

It's under the NAS section, then select QNAP.

 

Thanks guys.

 

Has the QNAP version gone live at the main download page?  All I see is Synology at https://emby.media/nas-server.html

Link to comment
Share on other sites
AvengersFan

AvengersFan   10

Posted
Posted (edited)

Ah it’s funny JD mentions that. I had a quick look yesterday on my iPad as well so I knew where it was. On a iPad, you can’t actually see the drop down arrow just the line. It I wasn’t until I used my PC that I released the drop down was there.

 

No biggie of course, but if someone was browsing, they may get the impression that only synology is available?

 

 

post-91733-0-90629200-1520717121_thumb.png

Edited by mrf0ster
Link to comment
Share on other sites
BradJMelb

BradJMelb   3

Posted
Posted

Ah it’s funny JD mentions that. I had a quick look yesterday on my iPad as well so I knew where it was. On a iPad, you can’t actually see the drop down arrow just the line. It I wasn’t until I used my PC that I released the drop down was there.

 

No biggie of course, but if someone was browsing, they may get the impression that only synology is available?

 

 

attachicon.gifC2DE75F4-F0D5-47A1-AD15-67A457A5059D.png

Haha, I did the same thing when browsing the site yesterday on my iPhone. Then realised later when I was on a bigger screen that it was a bit hidden.

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites
Rew452

Rew452   13

Posted
Posted (edited)

Luke

 

I am really impressed with this new release overall but I have just encountered a new issue with playback.

 

If i want to skip forward it will work a few times and then playback will stall with no recovery.

 

Same if I use chapters to change playback position.

 

Problem happens on some disks not all, any ideas?

 

Qnap 873 to Shield ATV all with the latest updates.

 

 

Rew

Edited by Rew452
Link to comment
Share on other sites
  • 2 weeks later...
Luke Emby Team

Luke   37235

Posted
  • Author
Posted

The qnap package has to be built manually on a qnap so it's not feasible for us to not every beta for it.

Link to comment
Share on other sites
isriam

isriam   0

Posted
Posted

is https working on 3.3.1.0? i'm unable to connect from my local network to the https port, but http works fine.  i have a pkcs12 cert also.

Link to comment
Share on other sites
Luke Emby Team

Luke   37235

Posted
  • Author
Posted

is https working on 3.3.1.0? i'm unable to connect from my local network to the https port, but http works fine.  i have a pkcs12 cert also.

 

Can you test it immediately after starting up the server? thanks.

Link to comment
Share on other sites
isriam

isriam   0

Posted
Posted

nope, restarted and tried to hit https://192.168.1.11:8920 and got reset  ERR_CONNECTION_RESET. 

 

I am able to hit public and private on 8096 with http though.  I also see both listening on the qnap.

 

tcp        0      0 :::8920                 :::*                    LISTEN      

tcp        0      0 :::8096                 :::*                    LISTEN   

Link to comment
Share on other sites
isriam

isriam   0

Posted
Posted

let me dig through it and look when i have more time.  i checked quickly and i only see http request currently, as if the https isn't even getting to it.

Link to comment
Share on other sites
  • 3 weeks later...
LukeNukem

LukeNukem   1

Posted
Posted

Hey guys,

 

just tried to switch from community version to your official release but think I maybe broke it, because instead of uninstalling the old version before installing 3.3.1.0 I just stopped it via qnap appcenter.

Meanwhile I did uninstall the old community version and qmono but can´t get the 3.3.1.0 running.

 

Installation via qnap appcenter works well but the wizard does not let me go further then the language selection. The circle keeps spinning after I click next and nothing more happens.

 

What can I do? Already deleted the /share/CACHEDEV1_DATA/.qpkg/EmbyServer folder and tried to reinstall. Are there more files I have to delete manually to clean my NAS from every old emby data?

 

TIA

Link to comment
Share on other sites
JERRY1

JERRY1   17

Posted
Posted

Been out of the lope for a while, what is the procedure changing over to this new package?

What do i have to delete, i already downloaded the package.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...