Vantage Point 2.0 - Complete Rework

[Cheesegeezer 3087]

 @pringhouse  i just tested on my windows version 4.0.8.17 and have had no issues.

hmmmm

 

Edited December 15, 2022 by Cheesegeezer

[pringhouse 2]

@Cheesegeezerdo I need the CinemaIntros plugin installed?

[Cheesegeezer 3087]

1 minute ago, pringhouse said:

@Cheesegeezerdo I need the CinemaIntros plugin installed?

I will be installed.  From the log it's running my code anyways.  I can see it all in the log there. Bad Boys movies, then gets the configuration and then has a brain fart 

 

[pringhouse 2]

Would it help for me to add each item in step to see where it breaks?

[Cheesegeezer 3087]

Just now, pringhouse said:

Would it help for me to add each item in step to see where it breaks?

Try removing your trailers one.  It might be that one looking at the log closer

are you a premium member, because the Trailers plugin requires premier to function

[pringhouse 2]

Am indeed a premier

 

Taking Trailers out - Plays fine - Adding the trailer back in - Fails

Folder Configuration:



Trailer configuration:

Edited December 15, 2022 by pringhouse

[crusher11 854]

.21 seems to kill this plugin, can anyone else confirm?

[crusher11 854]

On 12/24/2022 at 8:48 PM, crusher11 said:

.21 seems to kill this plugin, can anyone else confirm?

Further testing seems to indicate that if I've played something, it works as expected but if I haven't played it nothing happens. 

[Cheesegeezer 3087]

19 hours ago, crusher11 said:

Further testing seems to indicate that if I've played something, it works as expected but if I haven't played it nothing happens. 

So if the item has played flag then it works but not if its unplayed. 
what client are you on? What server are you on. 
any logs to share(debug) please

[crusher11 854]

5 minutes ago, Cheesegeezer said:

So if the item has played flag then it works but not if its unplayed. 
what client are you on? What server are you on. 
any logs to share(debug) please

Correct. I have two trailers and a bumper, with only the bumper set to run on items marked played. Right now, if I play an unplayed item I get nothing, if I play a played item I get the bumper. Latest ATV, latest beta server.

We've had no power here all day so I'm catching up on some stuff, will try and get logs later.

[Cheesegeezer 3087]

5 minutes ago, crusher11 said:

Correct. I have two trailers and a bumper, with only the bumper set to run on items marked played. Right now, if I play an unplayed item I get nothing, if I play a played item I get the bumper. Latest ATV, latest beta server.

We've had no power here all day so I'm catching up on some stuff, will try and get logs later.

Android TV or Apple TV, not that it matters but good for info.

i've just tested on beta version 21 and seems good on my end.  Can you check the Web client when you get chance.

Hope you get sorted with your power.

Merry Christmas

[crusher11 854]

Android, but the web and Emby Theater PC clients have the same issue.

Rotated log, marked Watermelon Man as played, played it, marked it as unplayed, played it again, downloaded the log.

embyserver.txt

[Cheesegeezer 3087]

3 hours ago, crusher11 said:

Android, but the web and Emby Theater PC clients have the same issue.

Rotated log, marked Watermelon Man as played, played it, marked it as unplayed, played it again, downloaded the log.

embyserver.txt 48.15 kB · 2 downloads

Thanks for the log, its good there is an error in it for the second scenario. I’m not at the laptop today but will look at it as soon as poss.

[unisoft 286]

So the last Emby app where TV Intros by TAG worked for at least one into video, is now broken. The LG App 1.0.37 came down in an update and immediately after TV Intros stopped working. This is using GA release of Emby Server 4.7.11.0. On the movies side, it still works but a new unwanted "feature" is a terrible grey background between each intro video whereas it was seamless before the update and looked smooth transition between each (on LG App).

Call me cynical, but this deliberate breaking of stuff seems like sour grapes on behalf of the Emby devs as your plugin was superior.

[Luke 37109]

17 minutes ago, unisoft said:

So the last Emby app where TV Intros by TAG worked for at least one into video, is now broken. The LG App 1.0.37 came down in an update and immediately after TV Intros stopped working. This is using GA release of Emby Server 4.7.11.0. On the movies side, it still works but a new unwanted "feature" is a terrible grey background between each intro video whereas it was seamless before the update and looked smooth transition between each (on LG App).

Call me cynical, but this deliberate breaking of stuff seems like sour grapes on behalf of the Emby devs as your plugin was superior.

There is currently an open issue where only the first episode of a series gets intros. We are looking into it. Thanks.

[amateurgod 26]

Im having an issue at the moment where it will play all of the intros just fine except for the audio codecs, this is how i have my audio codec intros names, is there a specific way i should be naming these for it to work? or could it be something else 

Edited December 28, 2022 by amateurgod

[Cheesegeezer 3087]

50 minutes ago, amateurgod said:

Im having an issue at the moment where it will play all of the intros just fine except for the audio codecs, this is how i have my audio codec intros names, is there a specific way i should be naming these for it to work? or could it be something else 

Hi there is needs to match the codec property what emby shows on details screen. 

 

Or the embedded title

[amateurgod 26]

51 minutes ago, Cheesegeezer said:

Hi there is needs to match the codec property what emby shows on details screen. 

 

Or the embedded title

Thank you, i shall upload some that match the codec from the details section exactly ie DTS.mkv instead of DTS 5.1.mkv

[crusher11 854]

10 hours ago, Cheesegeezer said:

Hi there is needs to match the codec property what emby shows on details screen. 

 

Or the embedded title

Question on this, is it capable of doing partial matching? ie if I have an intro called "2.0 Surround", having that match track titles "PCM 2.0 Surround",  "DTS-HD MA 2.0 Surround", "Dolby Digital 2.0 Surround", etc?

[Cheesegeezer 3087]

3 hours ago, crusher11 said:

Question on this, is it capable of doing partial matching? ie if I have an intro called "2.0 Surround", having that match track titles "PCM 2.0 Surround",  "DTS-HD MA 2.0 Surround", "Dolby Digital 2.0 Surround", etc?

Unfortunately not, its to remove ambiguity in titles.

i think what you are after is a “No of Channels” match. But a naming convention would need to be made so it was unique against any other possibilities. Something like - channels2 channels3 channels6 etc

[Cheesegeezer 3087]

So i've added the channels feature to the Codec Intro Category.

I'm just looking at your error @crusher11, i may need you to turn on debug logging and reproduce.  it does give a lot more information on whats happening.

Ok back to the channels feature....

Important.   The naming convention for the file is Channels#, where # = the number of channels ... not channel Layout.  so

1. a 2.0 layout would be 2,
2. 2.1 layout would be 3
3. a 5.1 layout would be 6
4. and so on

this info is all available in the details page 

In the codecs folder as you know... you can create folders inside your main codec folder (as the search is recursive anyways) or just throw them all in the same folder.

a file would look like this and it's not case sensitive.

Select Codec/Tag intro

Give you intro a Name after selecting the codec folder that has your channels Intro in.  Then Enable the Channel Match Switch

 

DON'T FORGET TO DO A LIBRARY SCAN FROM THE SCHEDULED TASK MENU AFTER ADDING YOUR NEW CHANNEL INTROS.

Then play your media and enjoy.

 

 

[Cheesegeezer 3087]

On 27/12/2022 at 07:56, crusher11 said:

Android, but the web and Emby Theater PC clients have the same issue.

Rotated log, marked Watermelon Man as played, played it, marked it as unplayed, played it again, downloaded the log.

embyserver.txt 48.15 kB · 4 downloads

I can reproduce the issue on mine if using Online trailers

Let me see what i can do.

[Cheesegeezer 3087]

New Version going up v2.1.0.5

This version 

1. Fixes Both Online and Local Trailer issues
2. Add Match No of Channels intro

Enjoy Peeps.

[Eigeplackter 75]

Is there a problem with multiple audio tracks in 1 file ?

Can't get an Codec-Intro running:

English Dolby Digital Plus Atmos 5.1.mkv is the intro name

 

 

 

PS: Can we have an EDIT button for VP ??

 

[Cheesegeezer 3087]

3 minutes ago, Eigeplackter said:

Is there a problem with multiple audio tracks in 1 file ?

Can't get an Codec-Intro running:

English Dolby Digital Plus Atmos 5.1.mkv is the intro name

 

 

To answer this question.  The plugin actually only looks for the First Track in video, audio streams of the media item.  

So even tho you have your atmos track named correctly,   it is actually the 2nd track so VP would never choose it anyway.  Which Audio Track do you have when you select the Movie? to play

By that i mean selection on the detail page

 

I could maybe check the streams that are being sent in playback manager, but i would need to get my head around that also, so wont be on the priority list.  As I have other things i'm working on. 

 

3 minutes ago, Eigeplackter said:

PS: Can we have an EDIT button for VP ??

I have thought about it but it's a lot of extra work for very little gain.  The thing to do is delete and make a new one.  for a few hours work for me (my Javascript is not good at all) against about 2mins work for the user, i decided not to do it.