Jump to content

embyforkodi (next-gen) 7.X.X support

quickmic

By quickmic
in Emby For Kodi Next Gen

 Share

Recommended Posts

Recommended

Posted by quickmic,

To all users. At least 50% of all reported issues needs additional clarifications. I must make assumption, guessing that's the meaning and coming back with followup questions. I mentioned it a couple of times and I say it again (also put it in FAQ soon).   1. Find a pattern, "sometimes" is no a proper issue description. I need to know, when exactly (what triggers an issue). 2. Repeat the issue at least 3 times on YOUR box. 3. Use the stock Kodi skin to confirm skin-

Issue-reporting procedures

Recommended by GrimReaper

  • Like

2 reactions

Go to this post
quickmic

quickmic   1352

Posted
  • Author
Posted
8 minutes ago, monkeylove said:

OK, I will install the Kodi log addon and capture the log when it happens again, and then will adjust the sync date after. I'm currently using version 7.10.5.

 

 

Please upgrade to latest version, I fixed a few sync issues in 7.13.X

Link to comment
Share on other sites
quickmic

quickmic   1352

Posted
  • Author
Posted (edited)

New version available 7.13.1 -> 7.13.2:

Delta changelog:

fix minor issue when Kodi library clean was triggered (edge case)
adjust keepalive session tracker interval from 4 to 10 seconds

 

Comment:

As there are no showstoppers reported, I'll push this version also into Emby's Kodi beta repo. -> Can take a while till it's synced.

Edited by quickmic
Link to comment
Share on other sites
Andy2k

Andy2k   60

Posted
Posted (edited)

Hi,

 

i guess the issue with beta server 4.8.0.20/21 still exists. I did some tests with 2 installations (Kodi 19.4 on WIndows 10, Coreelec 19.4 (latest)). On both i saw following issue (after resetting the local database):

Movie library: Adding a movie library results in only syncing boxsets. In result Kodi think there is no library, Main menue and category widgets are emty.

TV-Shows: TV-Shows will be synced, the Kodi mainmenue works for shows, but only the genre and studio widgets (default Estuary, also tested with Estuary Mod V2) are populates and working. Everything else (started shows, last added, ect.) are empty.

Music: Both of my music libraries seems to sync like before with emby server version 4.8.0.19 and below. And im not have the feeling its slower like before.

Both installations using E4K 7.13.2

 

01_KODI.log kodi.log kodi.old.log

Edited by Andy2k
Link to comment
Share on other sites
quickmic

quickmic   1352

Posted
  • Author
Posted (edited)
18 minutes ago, Andy2k said:


i guess the issue with beta server 4.8.0.20/21 still exists.

Yes and that's not a plugin issue. Wait till it's fixed on Emby server. 4.8.0.19 is the last working beta version.

 

 

 

Edited by quickmic
  • Like 1
Link to comment
Share on other sites
quickmic

quickmic   1352

Posted
  • Author
Posted (edited)
25 minutes ago, Andy2k said:

Hi,

 

i guess the issue with beta server 4.8.0.20/21 still exists. I did some tests with 2 installations (Kodi 19.4 on WIndows 10, Coreelec 19.4 (latest)). On both i saw following issue (after resetting the local database):

Movie library: Adding a movie library results in only syncing boxsets. In result Kodi think there is no library, Main menue and category widgets are emty.

TV-Shows: TV-Shows will be synced, the Kodi mainmenue works for shows, but only the genre and studio widgets (default Estuary, also tested with Estuary Mod V2) are populates and working. Everything else (started shows, last added, ect.) are empty.

Music: Both of my music libraries seems to sync like before with emby server version 4.8.0.19 and below. And im not have the feeling its slower like before.

Both installations using E4K 7.13.2

 

01_KODI.log 14.95 MB · 0 downloads kodi.log 726.51 kB · 0 downloads kodi.old.log 264.61 kB · 0 downloads

I assume your bug reports are for .21?

And yes, .21 is slow therefore the sync timeout after 5 minutes and movies are not synced.

 

2022-12-22 12:05:52.272 T:16796   ERROR <general>: EMBY.emby.http: [ ServerTimeout ]

2022-12-22 12:22:47.400 T:2808    ERROR <general>: EMBY.emby.http: [ ServerTimeout ]

etc.

Edited by quickmic
  • Like 1
Link to comment
Share on other sites
Andy2k

Andy2k   60

Posted
Posted

Yes, its for .21.

I have followed the other thread, but i was not sure if it is finaly a server or a plugin problem.But maybe there is some private discussion in the backround;)

 

  • Like 1
Link to comment
Share on other sites
quickmic

quickmic   1352

Posted
  • Author
Posted (edited)
On 12/22/2022 at 9:30 AM, quickmic said:
As there are no showstoppers reported, I'll push this version also into Emby's Kodi beta repo. -> Can take a while till it's synced.

Now available via Emby's Kodi beta repo. -> Target date for stable version is January 2023

Edited by quickmic
Link to comment
Share on other sites
Eigeplackter

Eigeplackter   75

Posted
Posted

Any one else having issues with the following procedure: I cannot seek using left/right arrow when movie plays it keeps crashing the MPC-HC (1.9.24)

with KODI (Matrix 19.4).

I don't think that the new beta forces this crash, but since I haven't changed KODI or MPC-HC, I just wanted to ask around here.

Link to comment
Share on other sites
Glyde62

Glyde62   48

Posted
Posted (edited)

My Embyforkodi just auto updated from 6.x.x to 7.xx.x is it suppose to do that at the moment???

 

Just noticed your post a couple above mine, Looked on 1st page expecting an announcement there

Edited by Glyde62
Link to comment
Share on other sites
quickmic

quickmic   1352

Posted
  • Author
Posted
6 hours ago, Glyde62 said:

My Embyforkodi just auto updated from 6.x.x to 7.xx.x is it suppose to do that at the moment???

 

Just noticed your post a couple above mine, Looked on 1st page expecting an announcement there

I only changed the tag from "public testing" to "beta" on page one.

btw, Your posting sounds a bit as the timing was inconvenient for you? If so, you should disable autoupdates on Kodi.

Link to comment
Share on other sites
Glyde62

Glyde62   48

Posted
Posted
31 minutes ago, quickmic said:

btw, Your posting sounds a bit as the timing was inconvenient for you? If so, you should disable autoupdates on Kodi.

No it was fine, Just surprised me this morning, Have been waiting for it to get out of testing before i updated

BTW is there a list of advantages of 7.xx.x over 6.xx.x??

Link to comment
Share on other sites
quickmic

quickmic   1352

Posted
  • Author
Posted (edited)

Full list on page one

 

Major changes 7.X:
skip intro support
multi library support (Same content assigned to multiple Emby libraries)
improved multi (content) versions support
completely rewritten music sync support
improved sync (Startup and realtime)
improved cinema mode support
improved iso support (dvd and bluray)

 

 

Probably the most important changes are under the hood:

stability improvements
countless bugfixes
performance improvements
remove all Kodi 18 (pyhton 2.X) code
clean code

Edited by quickmic
Link to comment
Share on other sites
quickmic

quickmic   1352

Posted
  • Author
Posted (edited)
18 hours ago, Eigeplackter said:

@quickmicmaybe you could check that kodi log, if you see anything why playback crashes ?

 

kodi.log 194.6 kB · 2 downloads

Only thing I can see is a filtered get request. Usually happens for dynamic nodes used as wigdet.

Rest looks good.

btw, MPC-HC, is EOL for 5 years

Edited by quickmic
Link to comment
Share on other sites
Eigeplackter

Eigeplackter   75

Posted
Posted
3 hours ago, quickmic said:

Only thing I can see is a filtered get request. Usually happens for dynamic nodes used as wigdet.

Rest looks good.

btw, MPC-HC, is EOL for 5 years

Thanks for the check, I'll wait for nexus to be stable and see what happens.

 

It's a for for madvr users, thats still maintained.

https://github.com/clsid2/mpc-hc/releases

  • Like 1
Link to comment
Share on other sites
LittleWizard

LittleWizard   28

Posted
Posted

I sometimes use Nvidia Shield with kodi offline with an usb memory to economize mobile connection.

In these occasions embyforkodi plugin keeps on showing popups "http socket connection error" every few seconds cause it is offline.

Is there a way to avoid that without disabling the addon?

There is no way to trigger syncing only if online and let the system or kodi advise the addon if online or not?

Thanks!

 

Link to comment
Share on other sites
tomimc

tomimc   13

Posted
Posted

Hi since las update, maybe two days ago, now i cant use a external player like mpc-be. The player says imposible to reder file.
was working perfect before. Dont know why.
  

2022-12-26 14:30:09.413 T:18064 WARNING <general>: Repository add-on repository.Maniac uses plain HTTP for add-on downloads in path http://raw.github.com/Maniac2017/repository.Maniac/master/repor/ - this is insecure and will make your Kodi installation vulnerable to attacks if enabled!
2022-12-26 14:30:12.226 T:18064    INFO <general>: Skipped 2 duplicate messages..
2022-12-26 14:30:12.226 T:18064    INFO <general>: ExternalPlayer Filename: C:\Program Files\MPC-BE x64\mpc-be64.exe
2022-12-26 14:30:12.226 T:18064 WARNING <general>: ExternalPlayer: invalid value for warpcursor: none
2022-12-26 14:30:12.226 T:18064    INFO <general>: ExternalPlayer Tweaks: hideconsole (false), hidexbmc (false), islauncher (false), warpcursor (none)
2022-12-26 14:30:12.226 T:18064    INFO <general>: CExternalPlayer::OpenFile: http://127.0.0.1:57342/movies/77031/m-c162d6eda268424e84b0f45be12eae80-145297-c6a9a1311514ee3eea36ad29ec2a1a26-1445-6143-14081169-0-1-h264-0-0-0-0-Codigo_Banshee__2022___BDRip_1080p_x264_DD__5.1__PXL_.mkv
2022-12-26 14:30:12.226 T:10628    INFO <general>: CExternalPlayer::Process: Player : C:\Program Files\MPC-BE x64\mpc-be64.exe
2022-12-26 14:30:12.226 T:10628    INFO <general>: CExternalPlayer::Process: File   : http://127.0.0.1:57342/movies/77031/m-c162d6eda268424e84b0f45be12eae80-145297-c6a9a1311514ee3eea36ad29ec2a1a26-1445-6143-14081169-0-1-h264-0-0-0-0-Codigo_Banshee__2022___BDRip_1080p_x264_DD__5.1__PXL_.mkv
2022-12-26 14:30:12.226 T:10628    INFO <general>: CExternalPlayer::Process: Content: 
2022-12-26 14:30:12.226 T:10628    INFO <general>: CExternalPlayer::Process: Args   : "{1}" /fullscreen /close
2022-12-26 14:30:12.226 T:10628    INFO <general>: CExternalPlayer::Process: Start
2022-12-26 14:30:12.276 T:10628    INFO <general>: CExternalPlayer::ExecuteAppW32: C:\Program Files\MPC-BE x64\mpc-be64.exe "C:\Program Files\MPC-BE x64\mpc-be64.exe" "http://127.0.0.1:57342/movies/77031/m-c162d6eda268424e84b0f45be12eae80-145297-c6a9a1311514ee3eea36ad29ec2a1a26-1445-6143-14081169-0-1-h264-0-0-0-0-Codigo_Banshee__2022___BDRip_1080p_x264_DD__5.1__PXL_.mkv" /fullscreen /close
2022-12-26 14:30:12.338 T:12936    INFO <general>: EMBY.hooks.player: [ onAVStarted ]
2022-12-26 14:30:12.338 T:12936    INFO <general>: EMBY.hooks.player: THREAD: --->[ position tracker ]
2022-12-26 14:30:12.338 T:5472     INFO <general>: EMBY.hooks.player: [ played info ] {'CanSeek': True, 'QueueableMediaTypes': 'Video,Audio', 'IsPaused': False, 'ItemId': 145297, 'MediaSourceId': 'c6a9a1311514ee3eea36ad29ec2a1a26', 'PlaySessionId': '7354daf32c404158a3bfde3b2865eb48', 'PositionTicks': 0, 'RunTimeTicks': 0, 'VolumeLevel': 100, 'IsMuted': False} / movie
2022-12-26 14:30:12.338 T:5472     INFO <general>: EMBY.hooks.player: [ onPlayBackStarted ]
2022-12-26 14:30:12.382 T:18064    INFO <general>: Activate of window '12005' refused because there are active modal dialogs
2022-12-26 14:30:12.451 T:13012    INFO <general>: EMBY.hooks.player: [ Queue playing item ]
2022-12-26 14:30:12.538 T:19192 WARNING <general>: Invalid GET request filtered: /movies/77031/m-c162d6eda268424e84b0f45be12eae80-145297-c6a9a1311514ee3eea36ad29ec2a1a26-1445-6143-14081169-0-1-h264-0-0-0-0-Codigo_Banshee__2022___BDRip_1080p_x264_DD__5.1__PXL_.mkv 
2022-12-26 14:30:12.855 T:19768    INFO <general>: Skipped 5 duplicate messages..
2022-12-26 14:30:12.855 T:19768    INFO <general>: Emby.hooks.websocket: [ UserDataChanged ] [{'PlaybackPositionTicks': 0, 'PlayCount': 8, 'IsFavorite': False, 'LastPlayedDate': '2022-12-26T13:30:12.0000000Z', 'Played': False, 'ItemId': '145297'}]
2022-12-26 14:30:12.856 T:19768    INFO <general>: EMBY.database.dbio: ---> DBOpenRO: c162d6eda268424e84b0f45be12eae80UserDataChanged19768
2022-12-26 14:30:12.856 T:19768    INFO <general>: Emby.hooks.websocket: UserDataChanged ItemSkipUpdate: [145297, 145297, 145297, 145297, 145297]
2022-12-26 14:30:12.856 T:19768    INFO <general>: Emby.hooks.websocket: [ UserDataChanged skip update/145297 ]
2022-12-26 14:30:12.856 T:19768    INFO <general>: Emby.hooks.websocket: UserDataChanged ItemSkipUpdate: [145297, 145297, 145297, 145297]
2022-12-26 14:30:12.856 T:19768    INFO <general>: EMBY.database.dbio: ---< DBCloseRO: c162d6eda268424e84b0f45be12eae80UserDataChanged19768
2022-12-26 14:30:13.338 T:12936    INFO <general>: EMBY.hooks.player: THREAD: ---<[ position tracker ]
2022-12-26 14:30:17.897 T:10628    INFO <general>: CExternalPlayer::ExecuteAppW32: WAIT_OBJECT_0
2022-12-26 14:30:17.897 T:10628    INFO <general>: CExternalPlayer::Process: Stop
2022-12-26 14:30:17.897 T:10628    INFO <general>: CExternalPlayer::Process: Showing Kodi window
2022-12-26 14:30:17.919 T:4104     INFO <general>: CAESinkWASAPI::EnumerateDevicesEx: stream type "STREAM_TYPE_DTSHD" on device "27G2G4 (2- NVIDIA High Definition Audio)" seems to be not supported.
2022-12-26 14:30:17.919 T:4104     INFO <general>: CAESinkWASAPI::EnumerateDevicesEx: stream type "STREAM_TYPE_DTSHD_MA" on device "27G2G4 (2- NVIDIA High Definition Audio)" seems to be not supported.
2022-12-26 14:30:17.919 T:4104     INFO <general>: CAESinkWASAPI::EnumerateDevicesEx: stream type "STREAM_TYPE_TRUEHD" on device "27G2G4 (2- NVIDIA High Definition Audio)" seems to be not supported.
2022-12-26 14:30:17.919 T:4104     INFO <general>: CAESinkWASAPI::EnumerateDevicesEx: stream type "STREAM_TYPE_EAC3" on device "27G2G4 (2- NVIDIA High Definition Audio)" seems to be not supported.
2022-12-26 14:30:17.919 T:4104     INFO <general>: CAESinkWASAPI::EnumerateDevicesEx: stream type "STREAM_TYPE_DTS" on device "27G2G4 (2- NVIDIA High Definition Audio)" seems to be not supported.
2022-12-26 14:30:17.920 T:4104     INFO <general>: CAESinkWASAPI::EnumerateDevicesEx: stream type "STREAM_TYPE_AC3" on device "27G2G4 (2- NVIDIA High Definition Audio)" seems to be not supported.
2022-12-26 14:30:17.921 T:4104     INFO <general>: CAESinkWASAPI::EnumerateDevicesEx: sample rate 192khz on device "27G2G4 (2- NVIDIA High Definition Audio)" seems to be not supported.
2022-12-26 14:30:17.925 T:4104     INFO <general>: CAESinkWASAPI::EnumerateDevicesEx: sample rate 192khz on device "Line 1 (Virtual Audio Cable)" seems to be not supported.
2022-12-26 14:30:17.929 T:4104     INFO <general>: CAESinkWASAPI::EnumerateDevicesEx: sample rate 192khz on device "Line 2 (Virtual Audio Cable)" seems to be not supported.
2022-12-26 14:30:17.943 T:4104     INFO <general>: Found 2 Lists of Devices

 

Link to comment
Share on other sites
Eigeplackter

Eigeplackter   75

Posted
Posted

Oh wow, had the same issues, and thought I screwed up my config.

Removed KODI, MPC-HC and MPC-BE (I tried that when MCP-HC wouldnt work) and made a clean installt.

But I installed the stable next-gen and now it works as supposed.

 

Interested to see what quickmic finds.

 

Link to comment
Share on other sites
zenkichi08

zenkichi08   3

Posted
Posted

quick question sorry if dumb

 

i got a big "final warning" yesterday when opening kodi, stating that i'd have to fully reset the kodi database for the addon's new version? yes/no -- chose yes, nothing happened. but no media will play anymore from emby server

 

so just go ahead and wipe kodi local database and reinitialize emby addon?

Link to comment
Share on other sites
olavinto

olavinto   3

Posted
Posted (edited)

I just got automatically updated to v7.13.2 and I reset the database as requested but it just doesn't want to work for some reason. I have reinstalled it several times, I've done a clean Kodi install and also tried a couple of different versions (now v20 RC2). Occasionally Movies are scanned and added, but not all. TV Shows are added but no seasons or episodes (I did get seasons and episodes by then scanning a show manually by selecting "Scan for new content" from the context menu).

The attached log has been taken immediately after launching Kodi and reinstalling and doing the basic setup of Emby for Kodi, meaning, after selecting "Use native paths" (nothing in them has changed) > Automatic server detection and login > Selecting Movie and TV Show libraries > This time basically nothing seemed to happen (no scanning notification or anything, just sat there like nothing had been done).

I don't have any idea what the problem is. I've used v6 for years without any problems (or however long it has been around) but version 7 doesn't work at all. I've reset database, done a factory reset, manually tried all library repair/update etc. options but it just seems like it just crashes or something. I also reverted my server to v4.8.0.19 beta but that doesn't seem to help at all either. Emby works fine through browsers and the mobile app, locally and remotely. Kodi and the server are on the same machine so this shouldn't be a connection problem and even if it were, why would it occasionally scan some content.

kodi.log

Edited by olavinto
Link to comment
Share on other sites
quickmic

quickmic   1352

Posted
  • Author
Posted (edited)
1 hour ago, tomimc said:

Hi since las update, maybe two days ago, now i cant use a external player like mpc-be. The player says imposible to reder file.
was working perfect before. Dont know why.
  

2022-12-26 14:30:09.413 T:18064 WARNING <general>: Repository add-on repository.Maniac uses plain HTTP for add-on downloads in path http://raw.github.com/Maniac2017/repository.Maniac/master/repor/ - this is insecure and will make your Kodi installation vulnerable to attacks if enabled!
2022-12-26 14:30:12.226 T:18064    INFO <general>: Skipped 2 duplicate messages..
2022-12-26 14:30:12.226 T:18064    INFO <general>: ExternalPlayer Filename: C:\Program Files\MPC-BE x64\mpc-be64.exe
2022-12-26 14:30:12.226 T:18064 WARNING <general>: ExternalPlayer: invalid value for warpcursor: none
2022-12-26 14:30:12.226 T:18064    INFO <general>: ExternalPlayer Tweaks: hideconsole (false), hidexbmc (false), islauncher (false), warpcursor (none)
2022-12-26 14:30:12.226 T:18064    INFO <general>: CExternalPlayer::OpenFile: http://127.0.0.1:57342/movies/77031/m-c162d6eda268424e84b0f45be12eae80-145297-c6a9a1311514ee3eea36ad29ec2a1a26-1445-6143-14081169-0-1-h264-0-0-0-0-Codigo_Banshee__2022___BDRip_1080p_x264_DD__5.1__PXL_.mkv
2022-12-26 14:30:12.226 T:10628    INFO <general>: CExternalPlayer::Process: Player : C:\Program Files\MPC-BE x64\mpc-be64.exe
2022-12-26 14:30:12.226 T:10628    INFO <general>: CExternalPlayer::Process: File   : http://127.0.0.1:57342/movies/77031/m-c162d6eda268424e84b0f45be12eae80-145297-c6a9a1311514ee3eea36ad29ec2a1a26-1445-6143-14081169-0-1-h264-0-0-0-0-Codigo_Banshee__2022___BDRip_1080p_x264_DD__5.1__PXL_.mkv
2022-12-26 14:30:12.226 T:10628    INFO <general>: CExternalPlayer::Process: Content: 
2022-12-26 14:30:12.226 T:10628    INFO <general>: CExternalPlayer::Process: Args   : "{1}" /fullscreen /close
2022-12-26 14:30:12.226 T:10628    INFO <general>: CExternalPlayer::Process: Start
2022-12-26 14:30:12.276 T:10628    INFO <general>: CExternalPlayer::ExecuteAppW32: C:\Program Files\MPC-BE x64\mpc-be64.exe "C:\Program Files\MPC-BE x64\mpc-be64.exe" "http://127.0.0.1:57342/movies/77031/m-c162d6eda268424e84b0f45be12eae80-145297-c6a9a1311514ee3eea36ad29ec2a1a26-1445-6143-14081169-0-1-h264-0-0-0-0-Codigo_Banshee__2022___BDRip_1080p_x264_DD__5.1__PXL_.mkv" /fullscreen /close
2022-12-26 14:30:12.338 T:12936    INFO <general>: EMBY.hooks.player: [ onAVStarted ]
2022-12-26 14:30:12.338 T:12936    INFO <general>: EMBY.hooks.player: THREAD: --->[ position tracker ]
2022-12-26 14:30:12.338 T:5472     INFO <general>: EMBY.hooks.player: [ played info ] {'CanSeek': True, 'QueueableMediaTypes': 'Video,Audio', 'IsPaused': False, 'ItemId': 145297, 'MediaSourceId': 'c6a9a1311514ee3eea36ad29ec2a1a26', 'PlaySessionId': '7354daf32c404158a3bfde3b2865eb48', 'PositionTicks': 0, 'RunTimeTicks': 0, 'VolumeLevel': 100, 'IsMuted': False} / movie
2022-12-26 14:30:12.338 T:5472     INFO <general>: EMBY.hooks.player: [ onPlayBackStarted ]
2022-12-26 14:30:12.382 T:18064    INFO <general>: Activate of window '12005' refused because there are active modal dialogs
2022-12-26 14:30:12.451 T:13012    INFO <general>: EMBY.hooks.player: [ Queue playing item ]
2022-12-26 14:30:12.538 T:19192 WARNING <general>: Invalid GET request filtered: /movies/77031/m-c162d6eda268424e84b0f45be12eae80-145297-c6a9a1311514ee3eea36ad29ec2a1a26-1445-6143-14081169-0-1-h264-0-0-0-0-Codigo_Banshee__2022___BDRip_1080p_x264_DD__5.1__PXL_.mkv 
2022-12-26 14:30:12.855 T:19768    INFO <general>: Skipped 5 duplicate messages..
2022-12-26 14:30:12.855 T:19768    INFO <general>: Emby.hooks.websocket: [ UserDataChanged ] [{'PlaybackPositionTicks': 0, 'PlayCount': 8, 'IsFavorite': False, 'LastPlayedDate': '2022-12-26T13:30:12.0000000Z', 'Played': False, 'ItemId': '145297'}]
2022-12-26 14:30:12.856 T:19768    INFO <general>: EMBY.database.dbio: ---> DBOpenRO: c162d6eda268424e84b0f45be12eae80UserDataChanged19768
2022-12-26 14:30:12.856 T:19768    INFO <general>: Emby.hooks.websocket: UserDataChanged ItemSkipUpdate: [145297, 145297, 145297, 145297, 145297]
2022-12-26 14:30:12.856 T:19768    INFO <general>: Emby.hooks.websocket: [ UserDataChanged skip update/145297 ]
2022-12-26 14:30:12.856 T:19768    INFO <general>: Emby.hooks.websocket: UserDataChanged ItemSkipUpdate: [145297, 145297, 145297, 145297]
2022-12-26 14:30:12.856 T:19768    INFO <general>: EMBY.database.dbio: ---< DBCloseRO: c162d6eda268424e84b0f45be12eae80UserDataChanged19768
2022-12-26 14:30:13.338 T:12936    INFO <general>: EMBY.hooks.player: THREAD: ---<[ position tracker ]
2022-12-26 14:30:17.897 T:10628    INFO <general>: CExternalPlayer::ExecuteAppW32: WAIT_OBJECT_0
2022-12-26 14:30:17.897 T:10628    INFO <general>: CExternalPlayer::Process: Stop
2022-12-26 14:30:17.897 T:10628    INFO <general>: CExternalPlayer::Process: Showing Kodi window
2022-12-26 14:30:17.919 T:4104     INFO <general>: CAESinkWASAPI::EnumerateDevicesEx: stream type "STREAM_TYPE_DTSHD" on device "27G2G4 (2- NVIDIA High Definition Audio)" seems to be not supported.
2022-12-26 14:30:17.919 T:4104     INFO <general>: CAESinkWASAPI::EnumerateDevicesEx: stream type "STREAM_TYPE_DTSHD_MA" on device "27G2G4 (2- NVIDIA High Definition Audio)" seems to be not supported.
2022-12-26 14:30:17.919 T:4104     INFO <general>: CAESinkWASAPI::EnumerateDevicesEx: stream type "STREAM_TYPE_TRUEHD" on device "27G2G4 (2- NVIDIA High Definition Audio)" seems to be not supported.
2022-12-26 14:30:17.919 T:4104     INFO <general>: CAESinkWASAPI::EnumerateDevicesEx: stream type "STREAM_TYPE_EAC3" on device "27G2G4 (2- NVIDIA High Definition Audio)" seems to be not supported.
2022-12-26 14:30:17.919 T:4104     INFO <general>: CAESinkWASAPI::EnumerateDevicesEx: stream type "STREAM_TYPE_DTS" on device "27G2G4 (2- NVIDIA High Definition Audio)" seems to be not supported.
2022-12-26 14:30:17.920 T:4104     INFO <general>: CAESinkWASAPI::EnumerateDevicesEx: stream type "STREAM_TYPE_AC3" on device "27G2G4 (2- NVIDIA High Definition Audio)" seems to be not supported.
2022-12-26 14:30:17.921 T:4104     INFO <general>: CAESinkWASAPI::EnumerateDevicesEx: sample rate 192khz on device "27G2G4 (2- NVIDIA High Definition Audio)" seems to be not supported.
2022-12-26 14:30:17.925 T:4104     INFO <general>: CAESinkWASAPI::EnumerateDevicesEx: sample rate 192khz on device "Line 1 (Virtual Audio Cable)" seems to be not supported.
2022-12-26 14:30:17.929 T:4104     INFO <general>: CAESinkWASAPI::EnumerateDevicesEx: sample rate 192khz on device "Line 2 (Virtual Audio Cable)" seems to be not supported.
2022-12-26 14:30:17.943 T:4104     INFO <general>: Found 2 Lists of Devices

 

Seems that's the problem.

"2022-12-26 14:30:12.538 T:19192 WARNING <general>: Invalid GET request filtered:"

It's actually a workaround for a Kodi bug, bu seems it breaks external players. I'll add an option to disable this function in next version.

 

Edited by quickmic
  • Like 1
Link to comment
Share on other sites
quickmic

quickmic   1352

Posted
  • Author
Posted (edited)
11 minutes ago, olavinto said:

I just got automatically updated to v7.13.2 and I reset the database as requested but it just doesn't want to work for some reason. I have reinstalled it several times, I've done a clean Kodi install and also tried a couple of different versions (now v20 RC2). Occasionally Movies are scanned and added, but not all. TV Shows are added but no seasons or episodes (I did get seasons and episodes by then scanning a show manually by selecting "Scan for new content" from the context menu).

The attached log has been taken immediately after launching Kodi and reinstalling and doing the basic setup of Emby for Kodi, meaning, after selecting "Use native paths" (nothing in them has changed) > Automatic server detection and login > Selecting Movie and TV Show libraries > This time basically nothing seemed to happen (no scanning notification or anything, just sat there like nothing had been done).

I don't have any idea what the problem is. I've used v6 for years without any problems (or however long it has been around) but version 7 doesn't work at all. I've reset database, done a factory reset, manually tried all library repair/update etc. options but it just seems like it just crashes or something. I also reverted my server to v4.8.0.19 beta but that doesn't seem to help at all either. Emby works fine through browsers and the mobile app, locally and remotely. Kodi and the server are on the same machine so this shouldn't be a connection problem and even if it were, why would it occasionally scan some content.

kodi.log 90.86 kB · 0 downloads

Which Emby server version are you (currently) using?

Edited by quickmic
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...