BaukeZwart 94 Posted March 22, 2021 Share Posted March 22, 2021 Sorry I have missed the post from @CharleyVarrick reporting this issue. For now I have reset the local db to get everything in sync. Link to comment Share on other sites More sharing options...
CharleyVarrick 277 Posted March 22, 2021 Share Posted March 22, 2021 2 minutes ago, BaukeZwart said: Sorry I have missed the post from @CharleyVarrick reporting this issue. It was PM., thats why Link to comment Share on other sites More sharing options...
CharleyVarrick 277 Posted March 22, 2021 Share Posted March 22, 2021 (edited) 11 minutes ago, BaukeZwart said: For now I have reset the local db to get everything in sync. If I get this right, reset local DB will be temp fix, it might probably happen again next time it processes updates quicmic is already working on it Sorry for double posting, I dont have the hang of multi-quoting Edited March 22, 2021 by CharleyVarrick Link to comment Share on other sites More sharing options...
BaukeZwart 94 Posted March 22, 2021 Share Posted March 22, 2021 (edited) Resetting the local db brought it back in sync and updating in Kodi is working again (as long as I don't delete anything) Edited March 22, 2021 by BaukeZwart 1 Link to comment Share on other sites More sharing options...
CharleyVarrick 277 Posted March 22, 2021 Share Posted March 22, 2021 1 minute ago, BaukeZwart said: Resetting the local db brought it back in sync and updating in Kodi is working again (as long as I don't delete anything) Judging by what I experienced lately, quickmic will find a fix, maybe not right now, but soon. We're in good hands, I am not worried. 1 Link to comment Share on other sites More sharing options...
CharleyVarrick 277 Posted March 22, 2021 Share Posted March 22, 2021 (edited) 5 hours ago, quickmic said: Not sure why it freezes, on first start. In the last few days, I have also observed systematic freezing on first* soft close (graceful exit as per Kodi's wording) *As in after adding libraries back Like @BaukeZwart, I performed local DB reset (and will refrain to delete content for time being) I have observed kodi apparent hang seconds after local DB reset (with "working..." prompt and spinning wheel. This lasts a minute or two, then eventually resume with the 3 usual questions.That 3rd question is actually more of a prompt "Kodi will now restart...", which is a bit misleading, as it actually only close. ( AngelBlue already acknowledged this 3 yrs+ ago). I realize I am nitpicking here, but it should either restart or else say "Kodi will now close..." Maybe barking up the wrong tree if its Kodi's bad choice of word (as opposed to Emby for Kodi's), in which case just disregard and forgive me. Edited March 22, 2021 by CharleyVarrick Link to comment Share on other sites More sharing options...
vurt 17 Posted March 22, 2021 Share Posted March 22, 2021 7 hours ago, quickmic said: It's a bug when a TVshows/Episode was removed. I'll check that. btw, same was also reported by @CharleyVarrick Hmm I am on the stable version (not the beta repo nor the test builds from here) and think I'm experiencing this. Everything had been working fine as usual but Kodi now no longer reflect new shows. Came on here to troubleshoot and read this comment. I did just delete some old shows via Sonarr. Could mine be the same issue even though I'm on the stable version? Is there a workaround? Link to comment Share on other sites More sharing options...
quickmic 1385 Posted March 22, 2021 Author Share Posted March 22, 2021 Please send me a log via PM, and I'll have a look. 1 Link to comment Share on other sites More sharing options...
vurt 17 Posted March 22, 2021 Share Posted March 22, 2021 24 minutes ago, quickmic said: Please send me a log via PM, and I'll have a look. Thank you @quickmic, just PMed you. Link to comment Share on other sites More sharing options...
quickmic 1385 Posted March 22, 2021 Author Share Posted March 22, 2021 (edited) 12 minutes ago, vurt said: Thank you @quickmic, just PMed you. Actually, the log seems quite ok beside the queued updates are not processed. This is normal while watching a video, but should continue after stopped. Plugin directly locked updates after your first playback ysterday at and seems never released. 2021-03-21 23:56:44.274. Did you try a reboot? Edited March 22, 2021 by quickmic Link to comment Share on other sites More sharing options...
CharleyVarrick 277 Posted March 22, 2021 Share Posted March 22, 2021 (edited) I am surprised this never being mentionned. Speaking of which, wasnt there an option in there (some time ago) to display progress bar if update count greater than 10 or something? Edited March 22, 2021 by CharleyVarrick Link to comment Share on other sites More sharing options...
CharleyVarrick 277 Posted March 22, 2021 Share Posted March 22, 2021 (edited) 8 hours ago, CharleyVarrick said: Judging by what I experienced lately, quickmic will find a fix, maybe not right now, but soon. We're in good hands, I am not worried. please st-by Edited March 22, 2021 by CharleyVarrick Link to comment Share on other sites More sharing options...
tube82 73 Posted March 22, 2021 Share Posted March 22, 2021 I am experiencing a minor issue with the current version regarding the update of watch progress. If I start a video in Kodi and pause it midway through, it correctly appears in the "Continue Watching" section in Emby web interface, but when I then finish watching it in Kodi, progress is not correctly updated in Emby. It is marked as watched as expected, but it remains under "Continue Watching" and with the progress it had when it was first paused. It then looks like this: 1 Link to comment Share on other sites More sharing options...
quickmic 1385 Posted March 22, 2021 Author Share Posted March 22, 2021 New version released (page 1 of this thread). It fixes two issues. -(realtime) update season sync -remove items on sync 1 Link to comment Share on other sites More sharing options...
quickmic 1385 Posted March 22, 2021 Author Share Posted March 22, 2021 44 minutes ago, tube82 said: I am experiencing a minor issue with the current version regarding the update of watch progress. If I start a video in Kodi and pause it midway through, it correctly appears in the "Continue Watching" section in Emby web interface, but when I then finish watching it in Kodi, progress is not correctly updated in Emby. It is marked as watched as expected, but it remains under "Continue Watching" and with the progress it had when it was first paused. It then looks like this: Thanks for reporting, not sure if this is a Emby server issue or a plugin issue. Can you please test with Emby app? If it shows the same behavior, probably a server issue. Link to comment Share on other sites More sharing options...
tube82 73 Posted March 22, 2021 Share Posted March 22, 2021 10 minutes ago, quickmic said: Thanks for reporting, not sure if this is a Emby server issue or a plugin issue. Can you please test with Emby app? If it shows the same behavior, probably a server issue. Just tried with Emby Android app. Could not reproduce the behavior. Episode disappeared from "Continue Watching" section correctly. 1 Link to comment Share on other sites More sharing options...
quickmic 1385 Posted March 22, 2021 Author Share Posted March 22, 2021 (edited) ok, I'll have a look. (put on the list) Edited March 22, 2021 by quickmic Link to comment Share on other sites More sharing options...
t123thomas 60 Posted March 22, 2021 Share Posted March 22, 2021 I dont know why the Kodi discioonected from the server, I left my Kodi on went for a walk for about 1/2 hour came back the laptop went to hybernation, pressed entered key the system came back, When I tries to play video I noticed it wasn't responding, actiors fan acts not populating so it seems that E4K disconnected with server, when I checked the log, it seems to confirm my assumption, I may be right/wrong. When I restart Kodi play back seems fine. No Urgency/Immediate Here is the logs 2021-03-22 14:11:24.494 T:10940 INFO <general>: script.module.metadatautils --> Rate limiter active for themoviedb.org - delaying request with 5 seconds - Configure a personal API key in the settings to get rid of this message and the delay. 2021-03-22 14:11:25.243 T:9788 INFO <general>: Skipped 1 duplicate messages.. 2021-03-22 14:11:25.243 T:9788 INFO <general>: INFO: EMBY.core.connection_manager: Found Servers: [{'Address': 'http://192.168.1.104:8096', 'Id': '3ee5bb58a99b4336876aa53525d507ac', 'Name': 'U-ROCK-PC'}] 2021-03-22 14:11:25.244 T:9788 INFO <general>: INFO: EMBY.core.connection_manager: Begin connectToServers, with 1 servers 2021-03-22 14:11:25.244 T:9788 INFO <general>: INFO: EMBY.core.connection_manager: testing connection mode 2 with server U-ROCK-PC 2021-03-22 14:11:25.244 T:9788 INFO <general>: INFO: EMBY.core.connection_manager: tryConnect url: http://192.168.1.104:8096/emby/system/info/public 2021-03-22 14:11:25.255 T:9788 INFO <general>: INFO: EMBY.core.connection_manager: calling onSuccessfulConnection with connection mode 2 with server U-ROCK-PC 2021-03-22 14:11:25.267 T:9788 ERROR <general>: ERROR: EMBY.core.HTTP: Error -3 while decompressing data: incorrect header check 2021-03-22 14:11:25.268 T:9788 ERROR <general>: ERROR: EMBY.hooks.monitor.Monitor: EmbyServer Connect error 2021-03-22 14:11:35.269 T:9788 INFO <general>: INFO: EMBY.emby.connect.Connect: --[ server/DEFAULT ] 2021-03-22 14:11:35.270 T:9788 INFO <general>: INFO: EMBY.core.connection_manager: Begin connect 2021-03-22 14:11:36.274 T:9788 INFO <general>: INFO: EMBY.core.connection_manager: Found Servers: [{'Address': 'http://192.168.1.104:8096', 'Id': '3ee5bb58a99b4336876aa53525d507ac', 'Name': 'U-ROCK-PC'}] 2021-03-22 14:11:36.274 T:9788 INFO <general>: INFO: EMBY.core.connection_manager: Begin connectToServers, with 1 servers 2021-03-22 14:11:36.274 T:9788 INFO <general>: INFO: EMBY.core.connection_manager: testing connection mode 2 with server U-ROCK-PC 2021-03-22 14:11:36.275 T:9788 INFO <general>: INFO: EMBY.core.connection_manager: tryConnect url: http://192.168.1.104:8096/emby/system/info/public 2021-03-22 14:11:36.286 T:9788 INFO <general>: INFO: EMBY.core.connection_manager: calling onSuccessfulConnection with connection mode 2 with server U-ROCK-PC 2021-03-22 14:11:36.308 T:9788 ERROR <general>: ERROR: EMBY.core.HTTP: Error -3 while decompressing data: incorrect header check 2021-03-22 14:11:36.308 T:9788 ERROR <general>: ERROR: EMBY.hooks.monitor.Monitor: EmbyServer Connect error 2021-03-22 14:11:46.308 T:9788 INFO <general>: INFO: EMBY.emby.connect.Connect: --[ server/DEFAULT ] 2021-03-22 14:11:46.309 T:9788 INFO <general>: INFO: EMBY.core.connection_manager: Begin connect 2021-03-22 14:11:47.311 T:9788 INFO <general>: INFO: EMBY.core.connection_manager: Found Servers: [{'Address': 'http://192.168.1.104:8096', 'Id': '3ee5bb58a99b4336876aa53525d507ac', 'Name': 'U-ROCK-PC'}] 2021-03-22 14:11:47.312 T:9788 INFO <general>: INFO: EMBY.core.connection_manager: Begin connectToServers, with 1 servers 2021-03-22 14:11:47.312 T:9788 INFO <general>: INFO: EMBY.core.connection_manager: testing connection mode 2 with server U-ROCK-PC 2021-03-22 14:11:47.312 T:9788 INFO <general>: INFO: EMBY.core.connection_manager: tryConnect url: http://192.168.1.104:8096/emby/system/info/public 2021-03-22 14:11:47.333 T:9788 INFO <general>: INFO: EMBY.core.connection_manager: calling onSuccessfulConnection with connection mode 2 with server U-ROCK-PC 2021-03-22 14:11:47.351 T:9788 ERROR <general>: ERROR: EMBY.core.HTTP: Error -3 while decompressing data: incorrect header check 2021-03-22 14:11:47.351 T:9788 ERROR <general>: ERROR: EMBY.hooks.monitor.Monitor: EmbyServer Connect error Link to comment Share on other sites More sharing options...
BaukeZwart 94 Posted March 22, 2021 Share Posted March 22, 2021 I noticed a cosmetic issue. When there is no tagline “0 –“ is shown in the movie plot field. This is also the case when using the Kodi default Estuary Skin. I never noticed this before, can this be E4K related? Link to comment Share on other sites More sharing options...
djhifi 55 Posted March 22, 2021 Share Posted March 22, 2021 (edited) I'm using 5.2.02 and sometimes incremental syncs simply stop mid-sync. Like, forever. Nothing throwed in the logs. Only fix is quitting KODI and starting it back. Incremental sync starts from 0 again, but eventually gets over the previous % where it stopped and completes successfully. Edited March 22, 2021 by djhifi Link to comment Share on other sites More sharing options...
quickmic 1385 Posted March 22, 2021 Author Share Posted March 22, 2021 (edited) @BaukeZwart Some other users mentioned that as well. How do you access this information? Edited March 22, 2021 by quickmic Link to comment Share on other sites More sharing options...
djhifi 55 Posted March 22, 2021 Share Posted March 22, 2021 Just now, quickmic said: Some other users mentioned that as well. How do you access this information? Sorry what do you mean by "how do you access this information" ? 1 Link to comment Share on other sites More sharing options...
quickmic 1385 Posted March 22, 2021 Author Share Posted March 22, 2021 1 minute ago, djhifi said: I'm using 5.2.02 and sometimes incremental syncs simply stop mid-sync. Like, forever. Nothing throwed in the logs. Only fix is quitting KODI and starting it back. Incremental sync starts from 0 again, but eventually gets over the previous % where it stopped and completes successfully. Please try latest version 5.2.04 (on page 1) Link to comment Share on other sites More sharing options...
djhifi 55 Posted March 22, 2021 Share Posted March 22, 2021 7 minutes ago, BaukeZwart said: I noticed a cosmetic issue. When there is no tagline “0 –“ is shown in the movie plot field. This is also the case when using the Kodi default Estuary Skin. I never noticed this before, can this be E4K related? I noticed that zero yesteday too, but not in there, on main menu widgets, if I'm over a movie. It's in the place of "unwatched" (episode number). But I think its skin related, I'm using the same skin as you: AEON Nox: SiLVO Report it there for us please Link to comment Share on other sites More sharing options...
quickmic 1385 Posted March 22, 2021 Author Share Posted March 22, 2021 Just now, djhifi said: Sorry what do you mean by "how do you access this information" ? This was an answer addressing @BaukeZwart You posted too fast Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now