DiscoDuck79 47 Posted December 29, 2020 Share Posted December 29, 2020 @quickmic Yes I do for accessing my domain. I don't use it for E4K though. Unless I'm mistaken, in default mode it acts like a proxy. If used in DNS Only mode it's more or less like no-ip dynamic dns. 1 Link to comment Share on other sites More sharing options...
quickmic 1358 Posted December 29, 2020 Author Share Posted December 29, 2020 (edited) If it is like a proxy, it reminds me of this issue: But as mentioned, it would not explain why it's working with 4.x. Actually 4.x also redirects URLs. In a different way, but still. Edited December 29, 2020 by quickmic Link to comment Share on other sites More sharing options...
t123thomas 60 Posted December 29, 2020 Share Posted December 29, 2020 23 hours ago, t123thomas said: -------------- Hi Am not sure what could be the cause of this, Titan Skin fails to recognized e4k 5.0.2 addon it works well until e4k842. The short cuts allows customization of short cut backdrops,sub-menus, let me know if info that you need to troubleshoot before 842 After 5.0.2 hi did U figure out the issue? between 824 to 5.0.2 Skin did not recognize 5.0.2, when restored 842 the addon was active Link to comment Share on other sites More sharing options...
feerlessleadr 155 Posted December 29, 2020 Share Posted December 29, 2020 So one big I've found when running 5.0.2 (could be on others, but haven't tried since running a very early version) is that I can't get subtitles to start off. Normally I have subtitles set to "forced only" in kodi settings, so that I only have subtitles show up if there are foreign parts of a show or movie that aren't in english. When I installed this updated add-on, no matter what I do, subtitles are always displayed when starting a new show or movie, and I have to manually disable them. I have tried turning subtitles off Visa the osd, then seeing that as default for all media, and I have tried setting the default subtitles to "none" in Kodi's player settings, but they are always on when starting a new show or movie. I have tried both in my existing profile and on a fresh profile, same results. Let me know if you'd like me to pull a log. I'm running CoreELEC 9.2.5 (which is kodi 18.9) on an odroid N2. Thanks Link to comment Share on other sites More sharing options...
quickmic 1358 Posted December 30, 2020 Author Share Posted December 30, 2020 I assume SRT subtitles? Internal are not modified in any way by the e4k (stream mode). Link to comment Share on other sites More sharing options...
feerlessleadr 155 Posted December 30, 2020 Share Posted December 30, 2020 5 hours ago, quickmic said: I assume SRT subtitles? Internal are not modified in any way by the e4k (stream mode). Yes that's correct, srt. Link to comment Share on other sites More sharing options...
quickmic 1358 Posted December 30, 2020 Author Share Posted December 30, 2020 6 hours ago, feerlessleadr said: Yes that's correct, srt. Will be fixed in next version. 1 Link to comment Share on other sites More sharing options...
feerlessleadr 155 Posted December 30, 2020 Share Posted December 30, 2020 (edited) 1 minute ago, quickmic said: Will be fixed in next version. Great thanks. I've been using the latest version for the last day or so and I've encountered no other bugs. Even the upgrade from 4.x to 5.x was very smooth. Great work! Edited December 30, 2020 by feerlessleadr 1 Link to comment Share on other sites More sharing options...
janenner 2 Posted December 30, 2020 Share Posted December 30, 2020 Hi, I've een using the 5.0.2 version an in general it's running fine. Good work! The only thing i missed is to play strm-files. Is there a Chance that this will work till the officiall release of Matrix? Thanksgiving and regards, jantenner Link to comment Share on other sites More sharing options...
quickmic 1358 Posted December 30, 2020 Author Share Posted December 30, 2020 strm files should work. Do you have issues? If yes, please send me a log. Link to comment Share on other sites More sharing options...
janenner 2 Posted December 30, 2020 Share Posted December 30, 2020 Yes, of course, here is the Kodi log file regarding the strm file is sie. kodi.log Link to comment Share on other sites More sharing options...
quickmic 1358 Posted December 30, 2020 Author Share Posted December 30, 2020 Seems there is something wrong with the settings file. Can you please try to delete your settings file or even better, start with a complete fresh Kodi? Link to comment Share on other sites More sharing options...
janenner 2 Posted December 30, 2020 Share Posted December 30, 2020 Yes, I will install Kodi again and try again from scratch. If there will be further issues, I could send another kodi.log. Many thanks for the quick support! 1 Link to comment Share on other sites More sharing options...
janenner 2 Posted December 30, 2020 Share Posted December 30, 2020 Unfortunately I got the same error message when I'm trying to play a strm file on a fresh Kodi. See the Kodi log attached. kodi.log Link to comment Share on other sites More sharing options...
quickmic 1358 Posted December 30, 2020 Author Share Posted December 30, 2020 (edited) ok, I'll check. There are till the same issues in the log: 2020-12-31 00:21:09.134 T:4947 DEBUG <CSettingsManager>: requested setting (Migrate) was not found. 2020-12-31 00:21:09.134 T:4947 DEBUG <CSettingsManager>: requested setting (webServerEnabled) was not found. 2020-12-31 00:21:09.134 T:4947 DEBUG <CSettingsManager>: requested setting (webServerSSL) was not found. Are you using addon or native mode? And what are you trying to play? Where should the strm file be redirected? Actually, I cannot event find a play command in your log. Edited December 31, 2020 by quickmic Link to comment Share on other sites More sharing options...
quickmic 1358 Posted December 31, 2020 Author Share Posted December 31, 2020 Nevermind, I think I see the problem... There is no filename detected... I try to fix it in the next version. Should be available by tomorrow... Link to comment Share on other sites More sharing options...
janenner 2 Posted December 31, 2020 Share Posted December 31, 2020 (edited) 9 hours ago, quickmic said: Are you using addon or native mode? I tried both. The result is the same. 9 hours ago, quickmic said: And what are you trying to play? Where should the strm file be redirected? I'm trying to play a Amazon Prime Movie. But the same error occurs, when I'm playing content from Netflix. That means the redirect goes to another Kodi Addon. Here is an example of a strm file: Ein Rezept für die Liebe.strm.txt Edited December 31, 2020 by janenner Link to comment Share on other sites More sharing options...
dml33 23 Posted December 31, 2020 Share Posted December 31, 2020 Hi. Firstly, congratulations for taking on this fork and continue a great job as joining together the best of Kodi and Emby. I have installed 5.0.2 version in one of my Kodi installations to test it before replacing the 4.x in the main one. It's quite good! And very functional already! I'm having some troubles with srt external subtitles, by the way. The original 4.x and Emby show them correctly in Kodi and Emby, but this 5.0.2 mixes their language when they are displayed in Kodi Subtitle menu, in order to choose the desired one. One example: Movie.Dual.ENG.SPA.mkv Movie.Dual.ENG.SPA.ENG.srt -> English sub. It appears correctly as English in Kodi Movie.Dual.ENG.SPA.SPA.srt -> Spanish subtitle, but it appears in Kodi as English as well. Movie.Dual.ENG.SPA.FRE.srt -> French subtitle, but it appears in Kodi as English as well Thanks! Link to comment Share on other sites More sharing options...
quickmic 1358 Posted December 31, 2020 Author Share Posted December 31, 2020 (edited) @janenner Can you please send me you MyVideos db. Seems there are special characters synced. ERROR <general>: CCurlFile::Open failed with code 400 for http://127.0.0.1:57578/movies/62d90cc82dad87bc21246970e77c512b/99693-5ec9394e366d327bc02c41c5c8245fb7-stream-_asin_B07PXNLQSD_mode_PlayVideo_name_Ein_Rezept_f_C3_BCr_die_Liebe_adult_0_trailer_0_selbitrate_0: -> ":" at the end btw, it's not good that there is no valid file extension like ".mkv", ".mp4" or "mp3" whatever. Kodi can be confused, cause not able to detect is video or audio. Edited December 31, 2020 by quickmic Link to comment Share on other sites More sharing options...
quickmic 1358 Posted December 31, 2020 Author Share Posted December 31, 2020 5 minutes ago, dml33 said: Hi. Firstly, congratulations for taking on this fork and continue a great job as joining together the best of Kodi and Emby. I have installed 5.0.2 version in one of my Kodi installations to test it before replacing the 4.x in the main one. It's quite good! And very functional already! I'm having some troubles with srt external subtitles, by the way. The original 4.x and Emby show them correctly in Kodi and Emby, but this 5.0.2 mixes their language when they are displayed in Kodi Subtitle menu, in order to choose the desired one. One example: Movie.Dual.ENG.SPA.mkv Movie.Dual.ENG.SPA.ENG.srt -> English sub. It appears correctly as English in Kodi Movie.Dual.ENG.SPA.SPA.srt -> Spanish subtitle, but it appears in Kodi as English as well. Movie.Dual.ENG.SPA.FRE.srt -> French subtitle, but it appears in Kodi as English as well Thanks! Yes, index is wrong. I'll upload a new version in the next minutes... Link to comment Share on other sites More sharing options...
quickmic 1358 Posted December 31, 2020 Author Share Posted December 31, 2020 (edited) New Version available: https://kodi.emby.media/Public testing/plugin.video.emby-next-gen-5.1.1.zip Fixes: SRT subtitles default disabled SRT subtitles Index wrong Fixes in migration Wizard New: Clean folder structure Known issues: Multiserver not working Windows native mode -> smb issue strm file special charecters issue General: No DB re-sync required. Due to complete new file/folder system, I hope I haven't broken anything. Edited December 31, 2020 by quickmic 1 Link to comment Share on other sites More sharing options...
quickmic 1358 Posted December 31, 2020 Author Share Posted December 31, 2020 On 12/29/2020 at 12:46 AM, t123thomas said: -------------- Hi Am not sure what could be the cause of this, Titan Skin fails to recognized e4k 5.0.2 addon it works well until e4k842. The short cuts allows customization of short cut backdrops,sub-menus, let me know if info that you need to troubleshoot before 842 After 5.0.2 This happens, due to rename the addon from plugin.video.emby to plugin.video.emby-next-gen The Skin needs an update... Link to comment Share on other sites More sharing options...
janenner 2 Posted December 31, 2020 Share Posted December 31, 2020 2 hours ago, quickmic said: you please send me you MyVideos db Is this file attached the db you asked for? MyVideoDB.zip Link to comment Share on other sites More sharing options...
quickmic 1358 Posted December 31, 2020 Author Share Posted December 31, 2020 yes, thank you. Link to comment Share on other sites More sharing options...
quickmic 1358 Posted December 31, 2020 Author Share Posted December 31, 2020 @janenner I've send you a PM Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now