All Activity

HI, yes it makes sense. Thanks.

Hello, visproduction, it is not media related like i wrote before. In the new beta .17 it happens only 1 time in the movie but it not get stucked anymore. Now i have just dropped frames at some point in the movie mostly at the end of it. All my media is fine and playing very well on every device (no transcoding -> direct stream), my network is 10GB wired and there are no bottlenecks at any point. Just the webplayback (playing back with internal network) is dropping frames at some point. I will deliver logs when i have a time for it. Kind regards, pektoral

Doesn't even the ASS subtitles give you problems? What subtitle format do you use? And what devices? As I mentioned, everything that is Android does play it Samsung, LG and browsers do not play subtitles in my case And I have tried several versions of Emby

Hi, I tested the 4.9.0.18 beta version and was happy to seean shot that the filter option for audiobooks is now available again. I want to thank you for the hard work and the quick response to this problem. I noticed an edge case with the filter. If I have an audiobook where all tracks are marked with played, but the book it self is not marked as played it does not appear when filtering for unplayed or played books. The book is only visible when the filter is set to all. I have are rkd attached a screenshot of a book in this state. It alsoes does not get listed if I mark the book as played and all tracks as unplayed. My opinion is, that it should filter by the state of the audio book itself and not consider the tracks it contains. My expectation would be if I filter by played state I only see books with/without a green check mark. I like the current behavior where the played status is not linked to the containing titles (not like tv series where the season gets marked played as soon all episodes are marked played). I am listening to audiobook while trying to sleep. Because of this, the titles often get marked all as played when I'm sleeping. But that is only my preference. Again big thanks and if there are any questions I'm happy to answer them.

Hi, Presently all the main music Menu Tabs (apart from Suggestions) show a useful Items Count to the LHS of the Play button (1888 Items example shown below): To find the individual counts for the Songs/Albums of a specific Album Artist/Artist/Composer currently takes a couple more ‘clicks’ to get to the relevant page(s). This is quite ok for looking up something specific on a few occasions, but not as nice for continuous top-level browsing through a music library category. If the Songs/Albums item counts were added as options to the “Show Fields” edit settings, for Album Artists/Artists/Composers, then this would show the info nicely for anyone wanting to view it more readily. (I would use an Albums Count as a permanently selected option, but others may like to see the Songs Count?) Anyone not wanting this info displayed below the images would not select the respective option(s), similarly to the current setup. Here is an example showing the Album Artist Title and Albums Count on the main Album Artist summary page: Adding these options would be a great improvement, giving more useful functionality with music viewing. Thanks for considering.

Yes, I have both Emby for Firestick and Emby standard on one of my Firesticks (have 5 Emby for Firestick). I will run the standard in my Man Cave office for the next while and see if I get the black screen. It is not especially frequent, perhaps once a week, so may be a while.

Hi, it’s something that we’ve talked about and is certainly possible.

Ok I am uploading my server log And the last ffmpeg record embyserver (1).txt ffmpeg-transcode-595853d3-1714-4d41-b806-e0e55f55e67f_1.txt

That's what I was expecting, since everything else is under the "3 dots". It's the only button I can think of that's kind of down there living life alone and on its own (when active), but maybe it can live in two places and still dynamically? Another "idea" is to make it visible all the time, so it's more noticeable, but have it grayed out when there isn't an active split. Thanks for the replies btw.

Has there every been any success on this? My family and I casting from the app to a Chromecast aren't able to resume or seek. It's been like this for a year or longer. It works as expected when playing to the web client, or to a native app (just not casting to Chromecast). When resuming it initially starts playing from the start then jumps to the moment requested, it then shows a still image and the audio plays. This is my experience for first, second, third and ultra gens of Chromecast including on Android tv. I'm using hardware transcoding, but it also doesn't work with it off. My storage is reasonably fast and and is either stripped array or SSD. There are no restrictions on my account that I can think of. If you can describe how to get the Chromecast logs I would be happy to get them. Thanks

The log tells you Now moving to C:\Users\{username}\AppData\Roaming\Emby-Server\programdata\cache\images\resized-images\f\fce6fd4e-f88f-74ad-ee00-932e886dc43c.webp But one should be possibly made for each client depending on say resolutions.

Awesome, thanks Happy2Play

I would wait for dev to reply. Doubt it will make a difference but does 4.9.0.18 make a difference.

Looks resolved in beta 4.9.0.18 <lockedfields>Cast</lockedfields>

Do I need to delete my database and start over or is there something else I can do to clean up the database? This started because I upgraded my hard drives to larger faster drives so I don't have as many now.

Something like this div.headerSection [title="Menu"] {display: none;}

This is database only information now. So in theory the api call should be all that is needed. 2024-05-10 15:20:02.107 Info Server: http/1.1 POST http://host:8096/emby/Library/VirtualFolders/Paths/Delete?refreshLibrary=true&path=L:\Emby Media\Mainstream Movies&name=Mainstream Movies&Id=5935&X-Emby-Client=Emby Web&X-Emby-Device-Name=Chrome Windows&X-Emby-Device-Id={deviceid}&X-Emby-Client-Version=4.9.0.17&X-Emby-Token=x_secret1_x&X-Emby-Language=en-us. UserAgent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/124.0.0.0 Safari/537.36 2024-05-10 15:20:02.110 Info Server: http/1.1 Response 204 to host. Time: 3ms. POST http://host:8096/emby/Library/VirtualFolders/Paths/Delete?refreshLibrary=true&path=L:\Emby Media\Mainstream Movies&name=Mainstream Movies&Id=5935&X-Emby-Client=Emby Web&X-Emby-Device-Name=Chrome Windows&X-Emby-Device-Id={deviceid}&X-Emby-Client-Version=4.9.0.17&X-Emby-Token=x_secret1_x&X-Emby-Language=en-us So can only guess there is something off with your database.

OK, no laughing as I'm sure that I'm not calling it by its correct name but does anyone know the reference name for the 3-lines (hamburger) menu button? I'm trying to hide it and what I'm doing is not working as I would like. .paper-icon-button-light.md-icon.headerSectionItem.headerButton.headerMenuButton {display: none;} This is too aggressive as it also hides the "Play All, Shuffle and Sort by File name" buttons that I want to keep. Thoughts? On a associated tangent, is there a data dictionary for all of the elements? It would help in the identification of the elements.

I will have to forgo Live TV I suppose when the server is solely running off the NAS, I don't use it very often anyway. I can still record Live TV via it's own software then just copy it to the NAS for Emby viewing I suppose.

Yeah, it's really strange. I've cleared my cache. I just thought maybe there is somewhere in an INI file or in the registry that might be holding on to them.

When I try to tune to a channel with a recording in-progess, I only have the option to watch the channel from the current live state as opposed to the beginning of the recording. When the playback begins, I can only rewind it to the point that I tuned to the channel. Only when the recording finishes does it show up under my TV Shows library and I can start the playback from the beginning. I thought in the past there was an option to start playback from the beginning of a recording when it was in-progess. Currently, I can't see any way to start the playback of an in-progess recording from the beginning until it finishes recording. Am I missing something? Currently running Emby 4.8.0.18 beta on Windows with the 2.0.98a FireTV app.

Which is also another reason to turn off "Real Time Monitoring" on one server. (The slave one is where RTM does more damage than good.) I think once an nfo gets written it is very unusual for it to get rewritten by Emby. But I have not reached the level of "Master" so many of the mysteries of the innerworkings of Emby are well outside my knowledge. I can see problems arising from having both servers wanting to use "Live TV" but I do not actually use "Live TV" so I have never tested that.

Live TV is irrelevant and off-topic. That other media servers/clients do not have this issue on Roku while Emby does is relevant as far as demonstrating that this is not a Roku defect per se. Autoplay appears to be behaving again as of 4.1.19. Have an Ultra still on 12.5.5 with 4.1.19 where autoplay is working fine as I type this with a series I've had trouble with before (HEVC+MKV), and a 4K Stick on 13.0 that was working fine earlier with a different series (AVC+MKV).

Hi. Exactly what option did you turn on?

Cool thanks for that, didn't even notice those two options, I will give it a try and see how it goes...:)