All Activity

Frame dropping occurs no matter what selections I make for renderer and acceleration. Could the graphics card be an issue? It started to do this completely out of the blue. What’s the solution if hardware acceleration is failing?

Yeah but no I prefer to keep it this way as it works quite well and easier than to have to trigger manually scans all the time

The new version you posted This works for me. Is it possible to filter out xxx videos?

Now I had reset the age rating in emby for various user accounts to “Highest permitted age rating” – De-18/FSK-18. It still shows me the films that it didn't show me last time. That's why unfortunately I can't send you any screenshots or give you any titles. However, with some other titles it is still the case that they are not displayed to me at all if they were recognized with the correct broadcast data. I had already uploaded examples and screenshots.

Hello I want to highlight two iussues whith the actual App (1.8.8) for Apple TV: This one is somewhat annoying as you cannot jump to a specific letter within your library if you are looking for a special movie or series I want to watch. Just so, I have more than 3400 Titles in my Anime library and it is really annoying to scroll forever to get to a specific letter. Please be so kind and add the letter secionts on the left or right side to make it easier to jump within a library! Well, this one is really annoying! This happens always when I sort the library i.E. with "Premiered" or "Added on" or "Last added episode". The app does not show ALL titles within a library, mostly only 1/4 of the titles. Thats not good and should be changed asap. Also there are some things for the settings which are missing: Please add the setting to change how many seconds you want to jump forward or backwards wenn scrolling while playing. At the moment you can jump only 10 seconds forward or backwards. This should be possible to change within the settings. smoon

Please please please !

Ok, thanks, I think I will wait until it appears in the store.

It may also be worth forcing emby to bind to just the .52 address (ethernet?) - set that in the emby network config. Then restart emby. As I said previously, I think the port forward is working just fine (or canyouseeme would not report open) but something is changing/blocking. Could be your ISP blocking but unlikely, your WAN IP may change, but it should generally only change during a router restart, it shouldn't change if you have existing connections.

Just adding info about CGNAT - A CGNAT Public IP Address is in this range 100.64.0.0 – 100.127.255.255 If the PC has both wifi and ethernet enabled and two different IP Addresses, best to do the troubleshooting with one of these network adapters disabled so either wifi or ethernet And of course the IP Address needs to be static / dhcp reservation in the router and the correct settings would be as advised here Alternative wan public ports could be tried - forwarding to local server ports 8096 and 8920 and specifying the alternative ports in the emby settings Other potential problem areas would be Double NAT - if there is a router in addition to the ISP modem/router, in such cases the problem can be circumvented by giving the second router a static ip address setup as dhcp reservation in the first modem/router and cascading the public port from the first modem/router to the second router with port forwards on the first modem router. A Double NAT can be detected if the router (2nd device) has a wan IP address that is local (provided by the first router)

I have noticed that on occassion Emby misses that the season has ended. Doesn't make sense why. I thought it was an anomally on my system as I had been messing about with it a fair bit last time I noticed. I'll keep an eye on it and report as a bug in the main forum if it happens again. I hadn't delved into the full details of the batch command or the Emby API so I was just putting my thoughts down as I guessed you would be able to shed some light It looks like it's too complex for such a simple result so I reckon I'll continue using Sonarr to delete the last episode or maybe get into the habit of manually deleting the series finale as I finish watching it, neither of which are really that arduous

Hi there, I just want to add my 2p here, I can very much guarantee that anyone with mac has this issue especially with AV1. With any AV1 file, it will direct play but only with a black video stream and audio working fine. If you transcode it at 720p 4mbps, then the video will output fine (if you transcode it at 1080p any bitrate, it won't have video at all, as far as I have tested) This is still happening and it's not ideal to change every av1 stream's quality *down* when AV1's quality is superb and great on filesize (would be nice to utilise it!) Weirdly enough! On Safari, if you play it, it won't direct play however it will have a working transcode at 1080p 8mbps (the app does not, it prefers 720p 4mbps) Let me know if there's anything you need me to provide.

Sorry, I'm not quite sure what should be replaced because the boxes in the .ass file are normal characters.

Hello, is there a way to set an Pre-Buffer for streaming? like Amazon,... My problem is: some of my clients have micro stutter BR

My version is 3.3.77. I have 3 different media files and with SRT i can replicate the issue. See the attachment. When I select the last option it won't let me change the offset time.

Can you not identify the directory below which the files are being added ? Lots of examples if you do web search for how to get list of files For example - from one web page, you can adapt one of the suggested commands to : in linux shell session, cd to the top directory where the files / folders are being created after the restrat and type in a command like this find $1 -type f -print0 | xargs -0 stat --format '%Y :%y %n' | sort -nr | cut -d: -f2- > filelist.txt This would produce in file filelist.txt a directory list of all files sorted by last date/time recursively starting with the current directory. (Adapted this from https://stackoverflow.com/questions/5566310/how-to-recursively-find-and-list-the-latest-modified-files-in-a-directory-with-s_ See also this for providing logs to be captured at the time of the metadata growth.

We'll try to chase it down, but just from some quick testing on a Pixel it seems to be working OK.

Wrong Thread?

Ok, I'll try to look at it tomorrow, but it maybe a challenging day. But really just do the locks like I did. Don't worry about the cases that don't overlap. If done right the time the locks are held is so short it won't be noticeable using it in every call. Again the only BIG one is the clean the cache search 100MB. That might need a special case lock of its own or something.

I'll send you a test version for review via PM. Will take anyway couple of hours, you can check it tomorrow or whenever you like. Good night, for me it's in the morning... European timezone

No the point of the locks is to protect any modification or reaction to global variables. They are fine to use on non-problematic content because they are brief and have minimal impact on the speed the code runs at. The only lock I worry about about is the scan 100MB of data while under lock. No need to special case things if their normal impact is small which i believe it will be.

DelayedContentId is the key for the global var "DelayedContent". It's more or less the http playload -> ""DelayedContentId": Payload.replace("/", "")" The lock should only intercept parallel queries for the same payload. e.g. 2 images are queried parallel but complete different ones, the lock should not block those, otherwise it would result in a stack.

I not have any idea, what growing inside metadata folder ... Just i see metadata folder never stop increase size.

thanks, I love emby (and has got lifetime premiere) but some features and some client apps are better with plex or with the movie editions, it's good enough if emby add some flag or somethings for the editions (like plex) the problem with the current solution is 2 thing, with groupped editions its not simple to choose from it (for example older or younger users) and without groupping the problem is there is exactly the same

I still have the same issue and i haven't found any fix for this.

Why? DelayedContentId is a local variable everywhere I've seen it. You only need to lock the global variable. If you're worried about pointer effects either hold the lock a bit longer or make a copy like I did with the string. You can point me to the code in question and I can give you a better opinion, but I think what I've done will work fine in the two functions I modified however they are called. I'm probably done for tonight though in terms of code review or writing more.