Luke 37994 Posted October 22, 2021 Author Share Posted October 22, 2021 46 minutes ago, awitney said: 1. Just to confirm that this is expected behavior: When I am listening to music on my Sonos speaker using the Emby Sonos plugin, if I select a song and attempt to "Add to Play Queue," the current song immediately stops and the song I was trying to queue up starts. Same thing happens with "Play next" (the song that's playing immediately stops and the desired "next" starts). Basically, with Emby+Sonos plugin, there is only a "present tense" (song that's playing) and no ability to affect what plays in the future (except by playlist). Is this expected? 2. Assuming that this is the (currently) expected behavior, I think I can guess why--no onboard memory on a Sonos speaker to store the queue and/or no good API on Sonos end to permit developers like Emby access to such queue control. Do you have anything like line-of-sight to a future world where "Play Next" and "Add to Play Queue" will work with the Sonos plugin? Hi, no this is not expected behavior. We need to add queue management support into the plug-in. Thanks. 1 Link to comment Share on other sites More sharing options...
JamesAdams 0 Posted November 23, 2021 Share Posted November 23, 2021 Hi, i bu a sonos speaker and i would like if we need internet to stream the music from Emby so sonos speaker ? Thanks. Link to comment Share on other sites More sharing options...
Luke 37994 Posted November 23, 2021 Author Share Posted November 23, 2021 8 hours ago, JamesAdams said: Hi, i bu a sonos speaker and i would like if we need internet to stream the music from Emby so sonos speaker ? Thanks. Hi, not from embys point of view, no. Link to comment Share on other sites More sharing options...
JamesAdams 0 Posted November 25, 2021 Share Posted November 25, 2021 On 23/11/2021 at 17:24, Luke said: Hi, not from embys point of view, no. I don't see my sonos speaker Link to comment Share on other sites More sharing options...
Spaceboy 2557 Posted November 25, 2021 Share Posted November 25, 2021 but do you have the sonos controller installed on the same pc as emby that can see the speaker? Link to comment Share on other sites More sharing options...
JamesAdams 0 Posted November 25, 2021 Share Posted November 25, 2021 14 minutes ago, Spaceboy said: but do you have the sonos controller installed on the same pc as emby that can see the speaker? No, I didn't know that something else had to be installed, there is no documentation for this plugin... Link to comment Share on other sites More sharing options...
JamesAdams 0 Posted November 25, 2021 Share Posted November 25, 2021 33 minutes ago, Spaceboy said: but do you have the sonos controller installed on the same pc as emby that can see the speaker? And what is sonos controller ? (i insaller sonos on emby plugin if is the controller) Link to comment Share on other sites More sharing options...
Spaceboy 2557 Posted November 25, 2021 Share Posted November 25, 2021 4 hours ago, JamesAdams said: No, I didn't know that something else had to be installed, there is no documentation for this plugin... there isnt. i was confused by this when i installed it and highlighted this to the devs, but.... 4 hours ago, JamesAdams said: And what is sonos controller ? (i insaller sonos on emby plugin if is the controller) if emby is installed on windows https://www.sonos.com/redir/controller_software_pc2 or https://www.sonos.com/redir/controller_software_pc depending on your sonos hardware Link to comment Share on other sites More sharing options...
JamesAdams 0 Posted November 26, 2021 Share Posted November 26, 2021 9 hours ago, Spaceboy said: there isnt. i was confused by this when i installed it and highlighted this to the devs, but.... if emby is installed on windows https://www.sonos.com/redir/controller_software_pc2 or https://www.sonos.com/redir/controller_software_pc depending on your sonos hardware Ok, but me emby his install on docker, there are a docker image for the controller ? Link to comment Share on other sites More sharing options...
JamesAdams 0 Posted November 26, 2021 Share Posted November 26, 2021 Ok, i found the problem, my emby his install in docker but connected in bridge, i change for host mode and it's work. Link to comment Share on other sites More sharing options...
Luke 37994 Posted November 26, 2021 Author Share Posted November 26, 2021 3 hours ago, JamesAdams said: Ok, i found the problem, my emby his install in docker but connected in bridge, i change for host mode and it's work. Thanks for the feedback. 1 Link to comment Share on other sites More sharing options...
NitroNine 22 Posted November 14, 2022 Share Posted November 14, 2022 I've decided to stop self hosting and now have my emby setup remotely. Does the sonos plugin not work for this type of setup? Link to comment Share on other sites More sharing options...
NitroNine 22 Posted November 17, 2022 Share Posted November 17, 2022 (edited) On 11/13/2022 at 9:17 PM, NitroNine said: I've decided to stop self hosting and now have my emby setup remotely. Does the sonos plugin not work for this type of setup? Or any way to cast to Sonos from a remote server? I know plexamp can. @Luke ? Edited November 17, 2022 by NitroNine Link to comment Share on other sites More sharing options...
Luke 37994 Posted November 18, 2022 Author Share Posted November 18, 2022 3 hours ago, NitroNine said: @Luke ? The server discovers the devices, so that means the Sonos devices need to be on the same local network as the server. At some point we'd like to move this to the apps so that it only needs to be on the same local network as the device you're playing from. Link to comment Share on other sites More sharing options...
NitroNine 22 Posted November 18, 2022 Share Posted November 18, 2022 (edited) 10 hours ago, Luke said: The server discovers the devices, so that means the Sonos devices need to be on the same local network as the server. At some point we'd like to move this to the apps so that it only needs to be on the same local network as the device you're playing from. Any idea what PlexAmp uses that allows me to cast to my local network Sonos devices using a remote server? I also found this for Navidrome, but I assume it could be used with Emby with some tweaking? Edited November 18, 2022 by NitroNine Link to comment Share on other sites More sharing options...
Luke 37994 Posted November 18, 2022 Author Share Posted November 18, 2022 3 hours ago, NitroNine said: Any idea what PlexAmp uses that allows me to cast to my local network Sonos devices using a remote server? I also found this for Navidrome, but I assume it could be used with Emby with some tweaking? It's exactly what I said. They have the detection in the client side l apps rather than the server 1 Link to comment Share on other sites More sharing options...
Lonald 9 Posted November 19, 2022 Share Posted November 19, 2022 I would like to endorse having Sonos support on the client side! When I am visiting friends with Sonos systems, it would be great to share some of my collection - some of which can be obscure... Can you name any Azerbaijanian jazz pianists? 1 Link to comment Share on other sites More sharing options...
wilcoson 1 Posted December 28, 2022 Share Posted December 28, 2022 Hi, I installed the Sonos plugin the other day but have yet to see Sonos appear as a casting option inside the emby app. The only way I can actually cast emby audio to Sonos is via iOS airplay, which I could do before installing the plugin.. I'm operating servers and Sonos all on the same local network. I've tried restarting emby server, rebooting Sonos port, etc. Nothing. What am I missing? Link to comment Share on other sites More sharing options...
secondoldguy 0 Posted January 2, 2023 Share Posted January 2, 2023 Sorry if this is a newbie question but... I have the Sonos plugin installed and dlna turned on but it appears that the plugin is not picking up all of my speakers. I see some via dlna (red) and others through the plugin (yellow), I assume. Also I have some groups setup in Sonos app but they are not showing up in the list. Link to comment Share on other sites More sharing options...
Anderella 13 Posted January 5, 2023 Share Posted January 5, 2023 Sonos support on the client side really would be lovely! I'm on this too. Any chance to get that supported in the near future? Thank you. Link to comment Share on other sites More sharing options...
Spaceboy 2557 Posted January 5, 2023 Share Posted January 5, 2023 On 02/01/2023 at 16:42, secondoldguy said: Sorry if this is a newbie question but... I have the Sonos plugin installed and dlna turned on but it appears that the plugin is not picking up all of my speakers. I see some via dlna (red) and others through the plugin (yellow), I assume. Also I have some groups setup in Sonos app but they are not showing up in the list. the ones you have underlined in yellow are your groups and the lead speaker is shown. Link to comment Share on other sites More sharing options...
Spaceboy 2557 Posted January 5, 2023 Share Posted January 5, 2023 tbh the sonos implementation in emby is pretty basic. i was looking at Music Assistant , a relatively new integration for Home Assistant the other day. there's a lot emby could take from it Link to comment Share on other sites More sharing options...
secondoldguy 0 Posted January 6, 2023 Share Posted January 6, 2023 23 hours ago, Spaceboy said: the ones you have underlined in yellow are your groups and the lead speaker is shown. Ok Thanks! Link to comment Share on other sites More sharing options...
secondoldguy 0 Posted January 7, 2023 Share Posted January 7, 2023 Another newbie question: is it possible to add to the groups and or devices that are currently playing. In other words if I start playing music on the office group and want to then add the bedroom , is that possible? Link to comment Share on other sites More sharing options...
Spaceboy 2557 Posted January 8, 2023 Share Posted January 8, 2023 18 hours ago, secondoldguy said: Another newbie question: is it possible to add to the groups and or devices that are currently playing. In other words if I start playing music on the office group and want to then add the bedroom , is that possible? no, you can't manage groups in emby - only use those already set up in the sonos app Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now