brammh 0 Posted July 19, 2016 Posted July 19, 2016 1) Are you currently running Emby on Synology? If yes, which Synology platform are you using?Not running Emby on Synology at the moment.I'm having an DS716+ 2) Would you be willing to test development packages? Yes! uname -a Linux NAS_BH 3.10.77 #7393 SMP Sat Jun 4 14:16:20 CST 2016 x86_64 GNU/Linux synology_braswell_716+ dmidecode -t 4 # dmidecode 2.12 # SMBIOS entry point at 0x7a850000 SMBIOS 2.8 present. # SMBIOS implementations newer than version 2.7 are not # fully supported by this version of dmidecode. Handle 0x0004, DMI type 4, 42 bytes Processor Information Socket Designation: CHV Type: Central Processor Family: Celeron Manufacturer: Intel(R) Corporation ID: C3 06 04 00 FF FB EB BF Signature: Type 0, Family 6, Model 76, Stepping 3 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (FXSAVE and FXSTOR instructions supported) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Multi-threading) TM (Thermal monitor supported) PBE (Pending break enabled) Version: Intel(R) Celeron(R) CPU N3150 @ 1.60GHz Voltage: 3.9 V External Clock: 80 MHz Max Speed: 1600 MHz Current Speed: 1600 MHz Status: Populated, Enabled Upgrade: Slot 1 L1 Cache Handle: 0x0006 L2 Cache Handle: 0x0007 L3 Cache Handle: Not Provided Serial Number: To Be Filled By O.E.M. Asset Tag: To Be Filled By O.E.M. Part Number: To Be Filled By O.E.M. Core Count: 4 Core Enabled: 4 Thread Count: 4 Characteristics: 64-bit capable Multi-Core Execute Protection Enhanced Virtualization Power/Performance Control
roklipni 0 Posted July 21, 2016 Posted July 21, 2016 Hey. Excellent news 1) Are you currently running Emby on Synology? If yes, which Synology platform are you using?Yes, I am running Emby on DS213. 2) Would you be willing to test development packages? Yes! The output is: (dmidecode -t 4 doesn't exist, and cat /proc/cpuinfo | grep -zoP "^processor\t: 0(\n|.)+?(?=\n\n)" gives empty feedback) Linux DiskStation 2.6.32.12 #7393 Thu Jun 2 19:48:48 CST 2016 armv5tel GNU/Linux synology_88f6282_213 Processor : Feroceon 88FR131 rev 1 (v5l) BogoMIPS : 1985.74 Features : swp half thumb fastmult edsp CPU implementer : 0x56 CPU architecture: 5TE CPU variant : 0x2 CPU part : 0x131 CPU revision : 1 Hardware : Synology 6282 board Revision : 0000 Serial : 0000000000000000
MWheeler72 0 Posted July 22, 2016 Posted July 22, 2016 Evening @@MWheeler72 If you can provide the information requested here http://emby.media/community/index.php?/topic/34866-synology-package-in-development/page-3&do=findComment&comment=334777, we can get you hooked up on the x86_64 test programme. - James Hi James. Sorry for the long delay. Here is the information requested. Thanks Linux DS415Play 3.2.40 #7393 SMP PREEMPT Thu Jun 2 19:47:23 CST 2016 i686 GNU/Linux synology_evansport_415play processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 54 model name : Intel® Atom CPU CE5335 @ 1.60GHz stepping : 2 microcode : 0x205 cpu MHz : 1600.112 cache size : 512 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm arat dtherm tpr_shadow vnmi flexpriority bogomips : 3200.22 clflush size : 64 cache_alignment : 64 address sizes : 32 bits physical, 48 bits virtual power management:
allanh 0 Posted July 22, 2016 Posted July 22, 2016 (edited) Hi James. Can I help with the development package test? root@ds214play:~# uname -a Linux ds214play 3.2.40 #7393 SMP PREEMPT Thu Jun 2 19:47:23 CST 2016 i686 GNU/Linux synology_evansport_214play root@ds214play:~# dmidecode -t 4 -ash: dmidecode: command not found root@ds214play:~# cat /proc/cpuinfo | grep -zoP "^processor\t: 0(\n|.)+?(?=\n\n)" processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 54 model name : Intel® Atom CPU CE5335 @ 1.60GHz stepping : 2 microcode : 0x205 cpu MHz : 1600.112 cache size : 512 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_per fmon pebs bts nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm arat dtherm tpr_shadow vnmi flexpriority bogomips : 3200.22 clflush size : 64 cache_alignment : 64 address sizes : 32 bits physical, 48 bits virtual power management: root@ds214play:~# Edited July 22, 2016 by allanh
mrbasic1 5 Posted July 23, 2016 Posted July 23, 2016 Hi James, 1) Are you currently running Emby on Synology? If yes, which Synology platform are you using? DS415+ running latest DSM 6 DSM 6 under VMware player 12 as a virtual guest (thanks to XPENOLOGY Forums). The VM guest can be re-created easily or run as multiple guests on a X86-64 Windows machine (very stable). 2) Would you be willing to test development packages? (these will install in parallel and not touch or interfer with the existing installation) YES.
mrbasic1 5 Posted July 24, 2016 Posted July 24, 2016 Hi James, Yes it works and nice job as I'm impressed..!! installed EMBY on a fresh copy of DSM 6 under VMware Player 12 on a Windoes 8 Intel I7 machine. Answer is yes to all the questions your looking for. I'll try my DS415+ tomorrow when I have time. Thanks for your efforts. Mike
mrbasic1 5 Posted July 24, 2016 Posted July 24, 2016 Hi again, updated my previous install to Version 3.0.6000.0 and all still works with 51 movies I copied over. Still followed the old upgrade method. I do like what you have done.
mrbasic1 5 Posted July 24, 2016 Posted July 24, 2016 Hi, Here is the output of the commands you have been requesting from test machines: root@VM-DS3615xs-2:~# uname -aLinux VM-DS3615xs-2 3.10.77 #7393 SMP Thu Jun 2 19:48:56 CST 2016 x86_64 GNU/Linux synology_bromolow_3615xsroot@VM-DS3615xs-2:~# cat /proc/cpuinfo | grep -zoP "processor\t: 0(\n|.)+?(?=\n\n)"processor : 0vendor_id : GenuineIntelcpu family : 6model : 60model name : Intel® Core i7-4700MQ CPU @ 2.40GHzstepping : 3microcode : 0x1ccpu MHz : 2393.479cache size : 6144 KBphysical id : 0siblings : 4core id : 0cpu cores : 4apicid : 0initial apicid : 0fpu : yesfpu_exception : yescpuid level : 13wp : yesflags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss ht syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand hypervisor lahf_lm abm ida arat epb xsaveopt pln pts dtherm fsgsbase tsc_adjust bmi1 avx2 smep bmi2 invpcidbogomips : 4786.95clflush size : 64cache_alignment : 64address sizes : 42 bits physical, 48 bits virtualpower management:
solabc16 379 Posted July 24, 2016 Author Posted July 24, 2016 Hi, Here is the output of the commands you have been requesting from test machines: root@VM-DS3615xs-2:~# uname -a Linux VM-DS3615xs-2 3.10.77 #7393 SMP Thu Jun 2 19:48:56 CST 2016 x86_64 GNU/Linux synology_bromolow_3615xs root@VM-DS3615xs-2:~# cat /proc/cpuinfo | grep -zoP "processor\t: 0(\n|.)+?(?=\n\n)" processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 60 model name : Intel® Core i7-4700MQ CPU @ 2.40GHz stepping : 3 microcode : 0x1c cpu MHz : 2393.479 cache size : 6144 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 4 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss ht syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand hypervisor lahf_lm abm ida arat epb xsaveopt pln pts dtherm fsgsbase tsc_adjust bmi1 avx2 smep bmi2 invpcid bogomips : 4786.95 clflush size : 64 cache_alignment : 64 address sizes : 42 bits physical, 48 bits virtual power management: Thanks Mike.
Wreid23 0 Posted July 26, 2016 Posted July 26, 2016 (edited) Hey James 1) Are you currently running Emby on Synology? If yes, which Synology platform are you using? Xpenology Build DSM 5.2-5644 Update 5 2) Would you be willing to test development packages? (these will install in parallel and not touch or interfer with the existing installation) Ready and willing to help my hd homerun prime needs a workout Xpenology Build DSM 5.2-5644 Update 5 /root$ uname -aLinux AJNAS 3.10.35 #1 SMP Tue Feb 2 17:44:24 CET 2016 x86_64 GNU/Linux synology_bromolow_3615xs/root$ dmeicode -t 4-ash: dmeicode: not found /root$ cat /proc/cpuinfo processor : 0vendor_id : GenuineIntelcpu family : 6model : 42model name : Intel® Core i5-2500K CPU @ 3.30GHzstepping : 7microcode : 0x28cpu MHz : 3301.000cache size : 6144 KBphysical id : 0siblings : 4core id : 0cpu cores : 4apicid : 0initial apicid : 0fpu : yesfpu_exception : yescpuid level : 13wp : yesflags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpidbogomips : 6599.91clflush size : 64cache_alignment : 64address sizes : 36 bits physical, 48 bits virtualpower management:processor : 1vendor_id : GenuineIntelcpu family : 6model : 42model name : Intel® Core i5-2500K CPU @ 3.30GHzstepping : 7microcode : 0x28cpu MHz : 3301.000cache size : 6144 KBphysical id : 0siblings : 4core id : 1cpu cores : 4apicid : 2initial apicid : 2fpu : yesfpu_exception : yescpuid level : 13wp : yesflags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpidbogomips : 6599.91clflush size : 64cache_alignment : 64address sizes : 36 bits physical, 48 bits virtualpower management:processor : 2vendor_id : GenuineIntelcpu family : 6model : 42model name : Intel® Core i5-2500K CPU @ 3.30GHzstepping : 7microcode : 0x28cpu MHz : 3301.000cache size : 6144 KBphysical id : 0siblings : 4core id : 2cpu cores : 4apicid : 4initial apicid : 4fpu : yesfpu_exception : yescpuid level : 13wp : yesflags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpidbogomips : 6599.91clflush size : 64cache_alignment : 64address sizes : 36 bits physical, 48 bits virtualpower management:processor : 3vendor_id : GenuineIntelcpu family : 6model : 42model name : Intel® Core i5-2500K CPU @ 3.30GHzstepping : 7microcode : 0x28cpu MHz : 3301.000cache size : 6144 KBphysical id : 0siblings : 4core id : 3cpu cores : 4apicid : 6initial apicid : 6fpu : yesfpu_exception : yescpuid level : 13wp : yesflags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpidbogomips : 6599.91clflush size : 64cache_alignment : 64address sizes : 36 bits physical, 48 bits virtualpower management: CPU: i5 2500K @ 3.3GHZ RAM: 8GB Edited July 26, 2016 by Wreid23
karnshome 0 Posted July 27, 2016 Posted July 27, 2016 Hey guys I am new to emby and would like to get a better understanding on how to install this on my current system. I am running on a DS212 on DSM 6. I am not able to find the appropriate mediainfo file in packages center. I am also not able to determine the correct ffmpeg and Emby file based on my CPU/architecture which is 88f6282(armv5) . Does the appropriate file exist for my nas or do I need to downgrade my DSM in order for it to work. Can anyone help me out?
schumi2004 9 Posted July 29, 2016 Posted July 29, 2016 (edited) I'm also interested in testing. (Not using Emby atm) DSM version 6.0.1-7393-2 Here is the requested info: root@DS715:~# uname -a Linux DS715 3.10.77 #7393 SMP Thu Jun 2 19:48:22 CST 2016 armv7l GNU/Linux synology_alpine_ds715 root@DS715:~# dmidecode -t 4 -ash: dmidecode: command not found root@DS715:~# cat /proc/cpuinfo | grep -zoP "^processor\t: 0(\n|.)+?(?=\n\n)" processor : 0 model name : ARMv7 Processor rev 4 (v7l) Speed : 1.4GHz Features : swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x2 CPU part : 0xc0f CPU revision : 4 root@DS715:~# Edited July 29, 2016 by schumi2004
Luke 38839 Posted July 29, 2016 Posted July 29, 2016 Hi guys, Initial testing for this has completed, and you can now install the Synology package by following the instructions on our website: http://emby.media/nas-server.html Thanks.
PinchOfSalt 0 Posted July 29, 2016 Posted July 29, 2016 I used the new installation procedure. It went smoothly and successfully. However, the Emby Server dashboard is telling me that an update is available, that I should shutdown the server and manually install the update. On the other hand, the Synology package center says that Emby Server is up to date. Do I just have to wait until the package center becomes aware of the new version (3.0.6020.0) or should I be doing something else? Thanks for your help with this - I am fairly new to Synology administration.
solabc16 379 Posted July 29, 2016 Author Posted July 29, 2016 (edited) Hello @@PinchOfSalt That is an area that needs a little bit of cleaning up, the package will become available via Package Center - there is nothing to be done manually or via the server dashboard. There are some further notes on updates on the Wiki here: https://github.com/MediaBrowser/Wiki/wiki/Synology-:-Notes-on-Package-Updates Best - James Edited July 29, 2016 by solabc16
PinchOfSalt 0 Posted July 30, 2016 Posted July 30, 2016 Thanks, solabc16. I wondered if it might be a loose end. The updated package did eventually appear in the Package Center. It is so good to be able to install Emby on my Synology box just like any other application!
solabc16 379 Posted August 7, 2016 Author Posted August 7, 2016 (edited) Hello All As you have probably noticed, the initial work on the Intel package is complete and is now out in the wild. We've started work on support for the Marvell processors and are now ready to start testing. The first alpha, which is ready now, will target the Kirkwood and Armada 300 series processors; others will follow soon after. If you don't know what type of processor your NAS has, check this Wiki page here: https://github.com/MediaBrowser/Wiki/wiki/Synology-:-Summary-of-Models-by-Processor So, if you'd like to help us with testing, drop us a note here with your Synology model and we'll get in touch. NOTE: As per the first post on this thread, the Emby package will install in parallel with your existing setup and not touch or interfer with it in any way. Best - James Edited August 8, 2016 by solabc16
gandja 1 Posted August 8, 2016 Posted August 8, 2016 Hi guys, Initial testing for this has completed, and you can now install the Synology package by following the instructions on our website: http://emby.media/nas-server.html Thanks. HI Luke, I have installed the package source (https://synology.emby.media/) as per normal, however the Emby package is not appearing in my Package Center (either under the Community tab nor any other tab). I have deleted and re-added the package several times, closed and reopened Package Center, refreshed package center numerous times and even pushed Trust Level to 'any publisher' over the last few hours............but still no luck getting the Emby package to appear in my Package Center. The only thing I haven't done yet is restart the NAS system - does it require a full NAS restart to appear in package center? (if so i'll restart later in the 'quieter' hours). I am running a DS1813+ on DSM 5.2-5644... this should be good for EMBY according to your requirement specs? It is an Intel and I don't see a restriction on DSM requirement??. Am I missing anything here? Thanks
solabc16 379 Posted August 8, 2016 Author Posted August 8, 2016 Hello @@gandja The DSM target for this package is DSM6, as there are underlying functional/performance improvements that are beneficial and for Synology box owners there isn't really any reason not to upgrade. Is there a reason why you're running DSM 5.2? Best - James
gandja 1 Posted August 8, 2016 Posted August 8, 2016 DSM 6, to put it politely, is a cluster***k - just review some of the comments on the synology forum. I have no plans to install DSM 6 until it gets a bit less 'feedback' on the synology forums. Such a shame, I been running emby on an old Windows server, but moving to the NAS was the last piece of my media puzzle................oh well. No avenue for DSM 5 implementation?? Thanks for getting back to me so promptly in any case.
solabc16 379 Posted August 8, 2016 Author Posted August 8, 2016 Hello @@gandja Can you be more specific with the issues you believe you will run into in your environment? Whilst all platforms have their issues, DSM6 at this point is widely and successfully deployed in both consumer and commercial environments. The DS1813+ was an active part of our test programme. If there was a significant demand for DSM5 support, it's something we might consider. Best -James
gandja 1 Posted August 8, 2016 Posted August 8, 2016 Hi James, There are a whole series of issues that have been brought up on the synology forums with various problems/errors. The main concern for me is I have yet to have been 'assured' that some community packages (sickbeard, couchpotato) remain operational (fully or partly) not to mention reports of 'bricks' for multiple users. Whilst ordinarily I'm very open to new things I have previously been burnt on a DSM upgrade (4 > 5) where I lost 20TB of files, now that my media library is 30+TB I just get a bit twitchy with DSM upgrades. I have no doubt I will eventually upgrade to DSM 6, just want to wait until some of the kinks are ironed out, which appears to be typically in the 9-12 month period post release - not too far away now - and who knows, now with an official Emby package I might get some dutch courage and bite the bullet earlier. I'm sure, and I know, I'm not alone in hanging on to DSM 5 (and, believe it or not, there are even still some on DSM 4) so I'm sure there would be demand for Emby compatibility to DSM 5, but whether that would bear enough weight to warrant the work on your end, I wouldn't know. Cheers gandja
Spaceboy 2561 Posted August 8, 2016 Posted August 8, 2016 Hi James, There are a whole series of issues that have been brought up on the synology forums with various problems/errors. The main concern for me is I have yet to have been 'assured' that some community packages (sickbeard, couchpotato) remain operational (fully or partly) not to mention reports of 'bricks' for multiple users. Whilst ordinarily I'm very open to new things I have previously been burnt on a DSM upgrade (4 > 5) where I lost 20TB of files, now that my media library is 30+TB I just get a bit twitchy with DSM upgrades. I have no doubt I will eventually upgrade to DSM 6, just want to wait until some of the kinks are ironed out, which appears to be typically in the 9-12 month period post release - not too far away now - and who knows, now with an official Emby package I might get some dutch courage and bite the bullet earlier. I'm sure, and I know, I'm not alone in hanging on to DSM 5 (and, believe it or not, there are even still some on DSM 4) so I'm sure there would be demand for Emby compatibility to DSM 5, but whether that would bear enough weight to warrant the work on your end, I wouldn't know. Cheers gandja CP working fine for me, sonarr is not yet but this is the only issue i have had since upgrading to DSM6
Spaceboy 2561 Posted August 8, 2016 Posted August 8, 2016 hi james, a minor issue to report, if i change the ports that emby on the synlogy uses this doesnt get reflected in the link in package center. cheers
Nic_J001 1 Posted August 8, 2016 Posted August 8, 2016 Hello All As you have probably noticed, the initial work on the Intel package is complete and is now out in the wild. We've started work on support for the Marvell processors and are now ready to start testing. The first alpha, which is ready now, will target the Kirkwood and Armada 300 series processors; others will follow soon after. If you don't know what type of processor your NAS has, check this Wiki page here: https://github.com/M...ls-by-Processor So, if you'd like to help us with testing, drop us a note here with your Synology model and we'll get in touch. NOTE: As per the first post on this thread, the Emby package will install in parallel with your existing setup and not touch or interfer with it in any way. Best - James Hi James I believe my NAS the DS214se has the following processor: Armada 370 x14 : DS214se I know I have had problems but would gladly test if you want me to. Thanks Nic
Recommended Posts