solabc16 379 Posted May 18, 2016 Share Posted May 18, 2016 Hi Tom Thanks for that, so the underlying problem is with Mono. Can you send me the output of 'uname -a' on your box please. - James Link to comment Share on other sites More sharing options...
to.gu.de 0 Posted May 19, 2016 Share Posted May 19, 2016 Hi James, thanks so far. Here is the output: admin@DiskStation:~$ uname -a Linux DiskStation 3.2.40 #7321 Wed Mar 23 11:48:58 CST 2016 armv7l GNU/Linux synology_armada370_213j - Tom Link to comment Share on other sites More sharing options...
cytec 11 Posted May 19, 2016 Share Posted May 19, 2016 i've updated the emby spk to the latest version: 3.0.5934 2 Link to comment Share on other sites More sharing options...
solabc16 379 Posted May 19, 2016 Share Posted May 19, 2016 Afternoon Tom The issue with this (SynoCommunity) version of Mono has been reported by some users and notably on your hardware. Now, I suspect this will be resolved shortly as Synology have now published the DSM 6.0 Tool Chains on SourceForge. If you are keen to get going we can take a look at getting you running under the Xamarin release, let me know if you'd like to do that. This might be the approach to take going forward for Emby on Synology, but no decision has been made yet. - James Link to comment Share on other sites More sharing options...
to.gu.de 0 Posted May 20, 2016 Share Posted May 20, 2016 Good Morning, yes, I can try running Emby with Mono (Xamarin release). I will give it a try. - Tom PS I will be unable to work on this the next few days. Link to comment Share on other sites More sharing options...
solabc16 379 Posted May 20, 2016 Share Posted May 20, 2016 Morning Tom Ok, thanks - will post details over the weekend and you can have a look at it when you have a moment. - James Link to comment Share on other sites More sharing options...
Darkjeje 11 Posted May 23, 2016 Share Posted May 23, 2016 The package 5971 is not the good, I think that it is always 3.0.5970. Can anybody confirm ? Link to comment Share on other sites More sharing options...
tixx 8 Posted May 28, 2016 Share Posted May 28, 2016 hey all, are we any closer to a properly updating emby server (hopefully automatically through synocommunity). for a couple of years now we've had to manually keep updating the server, and with this frequent updating it gets tedious. Not to mention dsm6 and emby are still very buggy (still cant get my emby to work on my 415+.. Link to comment Share on other sites More sharing options...
solabc16 379 Posted May 28, 2016 Share Posted May 28, 2016 Afternoon @@tixx - please take a look through this thread http://emby.media/community/index.php?/topic/34866-synology-package-in-development/?p=329452. - James Link to comment Share on other sites More sharing options...
tixx 8 Posted May 28, 2016 Share Posted May 28, 2016 thanks mate, looks the goods. i'll be happy to join the test base. Thanks Link to comment Share on other sites More sharing options...
Darkjeje 11 Posted May 29, 2016 Share Posted May 29, 2016 (edited) Hello James, Would you know why, when I update Emby from 3.0.5970.0 to 3.0.5972 by following the stages for DSM 6, Emby continues to indicate that my version is 5970 and that an update exists for 5972? For information, I did not use - Update package with version number, e.g.: sed -i.bak 's/\(^version="\)[^"]*\("$\)/\1v3\.0\.5934\.0\2/' /var/packages/emby/INFO which if I understood well, changes the version only in DSM. Thank for your helpJérem Edited May 29, 2016 by Darkjeje Link to comment Share on other sites More sharing options...
solabc16 379 Posted May 29, 2016 Share Posted May 29, 2016 Evening Jérem I've just taken a look at this and can see how it could happen, please take a look at http://emby.media/community/index.php?/topic/34516-updating-emby-on-dsm6-systems/?p=326672 which I've just updated with an additional step. Yes, you have understood correctly regarding the version information. - James Link to comment Share on other sites More sharing options...
Darkjeje 11 Posted May 30, 2016 Share Posted May 30, 2016 Yes it's good !!!Thank you James Link to comment Share on other sites More sharing options...
Samwesome 0 Posted May 30, 2016 Share Posted May 30, 2016 Hi everybody, I'm looking for a solution to install the emby beta on my ds216j but the configuration is an armada 385 and i saw no ffmpeg and emby for this platform. Do you know how i can do ? Thank you :-) Link to comment Share on other sites More sharing options...
wout 0 Posted June 6, 2016 Share Posted June 6, 2016 (edited) 4. Download and Install ffmpeg from here: http://cytec.us/syno/test-spk/ffmpeg/ I'm stuck on step 4 of the Installation bit. When trying to do a manual install in Package Center of the .pkg file I downloaded from the URL above, it gives me a 'this package is not supported on the platform of diskstation'. I downloaded ffmpeg_x64-5.1_2.6-3.spk for my DS216+ which has an Intel Braswell CPU. edit: added uname -a output root@NAS2:~# uname -a Linux NAS2 3.10.77 #7321 SMP Mon Apr 25 15:58:40 CST 2016 x86_64 GNU/Linux synology_braswell_216+ Edited June 6, 2016 by wout Link to comment Share on other sites More sharing options...
solabc16 379 Posted June 7, 2016 Share Posted June 7, 2016 Hello @wout We're about to start closed group testing a new self contained package for Emby on Synology - the headline for what we're doing here is http://emby.media/co...pment/?p=329452 There's an interim update here with some screenshots http://emby.media/co...pment/?p=331583 If you can help out, please take a look at http://emby.media/co...pment/?p=334777 and post the information requested. Initial target as noted above is DSM6/x86_64, so your system would be covered. Best - James Link to comment Share on other sites More sharing options...
wout 0 Posted June 7, 2016 Share Posted June 7, 2016 @@solabc16 Hello James, Thanks for your quick response. Please find the requested info below: root@NAS2:~# uname -a Linux NAS2 3.10.77 #7321 SMP Mon Apr 25 15:58:40 CST 2016 x86_64 GNU/Linux synology_braswell_216+ root@NAS2:~# dmidecode -t 4 # dmidecode 2.12 # SMBIOS entry point at 0x3a850000 SMBIOS 2.8 present. # SMBIOS implementations newer than version 2.7 are not # fully supported by this version of dmidecode. Handle 0x0004, DMI type 4, 42 bytes Processor Information Socket Designation: CHV Type: Central Processor Family: Celeron Manufacturer: Intel(R) Corporation ID: C3 06 04 00 FF FB EB BF Signature: Type 0, Family 6, Model 76, Stepping 3 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (FXSAVE and FXSTOR instructions supported) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Multi-threading) TM (Thermal monitor supported) PBE (Pending break enabled) Version: Intel(R) Celeron(R) CPU N3050 @ 1.60GHz Voltage: 4.0 V External Clock: 80 MHz Max Speed: 1600 MHz Current Speed: 1600 MHz Status: Populated, Enabled Upgrade: Slot 1 L1 Cache Handle: 0x0006 L2 Cache Handle: 0x0007 L3 Cache Handle: Not Provided Serial Number: To Be Filled By O.E.M. Asset Tag: To Be Filled By O.E.M. Part Number: To Be Filled By O.E.M. Core Count: 2 Core Enabled: 2 Thread Count: 2 Characteristics: 64-bit capable Multi-Core Execute Protection Enhanced Virtualization Power/Performance Control Thanks, Wout Link to comment Share on other sites More sharing options...
wout 0 Posted June 7, 2016 Share Posted June 7, 2016 Meanwhile, I managed to install FFMpeg by editing the INFO-file in the archive and adding 'braswell' to the line with arch="... However, the installation of the Emby package does not want to run, because one of its depedencies (ImageMagick) is not installed. I did download the ImageMagick tarball mentioned in the OP and followed the instructions below to get all the files in the appropriate folders on the NAS, but it seems I need to take additional steps to actually run the package? How to Install ImageMagick SSH to your Synology NAS as 'root'. You should be in /root, check with 'pwd'. Backup the currently installed version 'mv /volume1/@appstore/imagemagick /volume1/@appstore/_pkgcenter_imagemagick'. Extract the files from the downloaded ImageMagick archive 'tar -xvf imagemagick-6.9.3-7_Q8.tar.gz -C /volume1/@appstore/'. Any pointers on getting the ImageMagick running so the Emby package will recognize this dependency? Link to comment Share on other sites More sharing options...
solabc16 379 Posted June 7, 2016 Share Posted June 7, 2016 Afternoon @@wout Thanks for your system info above. We're in the process of final packaging as I type, so we'll have this new package out for testing later today. So if you can hang on a ltitle longer, that's going to be the best way to get you up and running. - James Link to comment Share on other sites More sharing options...
wout 0 Posted June 7, 2016 Share Posted June 7, 2016 @@solabc16 Good afternoon James, Do I understand you correctly when I say that the package will include/trigger its dependencies as well then? As in: installing the Emby package will ensure the dependencies (including ImageMagick) will install as well? That would be great! I will patiently wait for the package and appreciate the effort being put into all this! Just eager to get started :-) - Wout Link to comment Share on other sites More sharing options...
solabc16 379 Posted June 7, 2016 Share Posted June 7, 2016 Afternoon @@wout The new package is totally self contained, so there are no dependencies to manage. For the end user, this will make for simple one click installation/maintenance. From an application perspective, over time this will improve stability and reliability, as Emby Server will be tested and released with a known and consistent set of dependencies. - James Link to comment Share on other sites More sharing options...
wout 0 Posted June 7, 2016 Share Posted June 7, 2016 @@solabc16 Hi James, that's excellent! Thanks for your explanation. -Wout Link to comment Share on other sites More sharing options...
jrpinto 0 Posted June 11, 2016 Share Posted June 11, 2016 Hello, I need help, I am stuck with Emby on DSM6. What I did so far: Installed Mono (Xamarin) Installed Mediainfo Installed ImageMagic Replaced ImageMagic with the version attached at the top of this topic (imagemagick-6.9.3-7_Q8) Installed ffmpeg Installed emby but was refused to the depency to "mono" Installed mono (SynoCommunity) restarted NAS: all installed packages up & running installed emby: everytime I want to start emby, emby stops immediatly edited /var/packages/emby/scripts: MONO_PATH="/usr/local/Mono/usr/bin" instead of "/usr/local/mono/bin" restarted NAS: emby still stopping immediatly after (manual) start So I have no idea where to look to find out what is going wrong. Every help is welcome. Thanks, Tom What is running: DSM 6.0-7321 Update 6 (on DS213j) Mono 4.2.1-0088 (Xamarin) mono 4.2.2.30-7 (SynoCommunity) Mediainfo 0.7.73-2 (SynoCommunity) ImageMagic (imagemagick-6.9.3-7_Q8.tar.gz) ffmpeg 2.6-3 emby 3.0.5724.5-5 I have the same situation as to.gu.de. The only difference is my config is DSM 6.0.1-7393 (on DS214SE). Any help? Link to comment Share on other sites More sharing options...
fallcat 0 Posted July 2, 2016 Share Posted July 2, 2016 916+ how to install Link to comment Share on other sites More sharing options...
solabc16 379 Posted July 2, 2016 Share Posted July 2, 2016 (edited) Afternoon @@fallcat We'll be making an Emby Media supported package for Synology available within the next couple of weeks for x86_64/i686 architectures; we're in the final stages of the test programme. If you would like to get early access, take a look at this thread http://emby.media/community/index.php?/topic/34866-synology-package-in-development/ and send the information requested here http://emby.media/community/index.php?/topic/34866-synology-package-in-development/page-3&do=findComment&comment=334777 Best - James Edited July 2, 2016 by solabc16 1 Link to comment Share on other sites More sharing options...
Recommended Posts