gillmacca01 150 Posted September 2, 2022 Share Posted September 2, 2022 This probably isn't possibly, but hey, If you don't ask, you don't know. Is it possible to create a playlist based on certain tv channels/tags? Link to comment Share on other sites More sharing options...
Hawkwinter 11 Posted September 3, 2022 Share Posted September 3, 2022 19 hours ago, gillmacca01 said: This probably isn't possibly, but hey, If you don't ask, you don't know. Is it possible to create a playlist based on certain tv channels/tags? In theory, "Tag (Tree Crawl)" should do what you want. However, in practice I just tested it, and it doesn't seem to work. I put a tag on three "seasons" of a show (movies sorted as seasons), ran a basic playlist filter where all it did was a tree crawl check for that tag, and it only detected one item when it should have detected three. Link to comment Share on other sites More sharing options...
BaiGanJia 21 Posted September 5, 2022 Share Posted September 5, 2022 @ShaneP dear shaneP, is this possible to sort by added list asc? like movie1,movie2--->move250 and also I found a bug , when I making a new playlist, I added 250 items to the listzone, - Update type:manual - save - execute the system RAM,Memory usage soared to 11gb and broken down my serverPC, I mean:If add too many items, it will cause the execution to take up too much memory and cause a crash Link to comment Share on other sites More sharing options...
BaiGanJia 21 Posted September 5, 2022 Share Posted September 5, 2022 dear @ShaneP Is there a way to count the playback of all users instead of a single user? Link to comment Share on other sites More sharing options...
ShaneP 227 Posted September 5, 2022 Author Share Posted September 5, 2022 Hey everyone, just got back from holidays will go through the messages and see what needs fixing/doing. 4 Link to comment Share on other sites More sharing options...
eeeeeesy 31 Posted September 6, 2022 Share Posted September 6, 2022 (edited) is this working in 4.7.6.0? i hit save then on the next page i click on "open item in new window" but this is all i see Edited September 6, 2022 by eeeeeesy Link to comment Share on other sites More sharing options...
horstepipe 356 Posted September 6, 2022 Share Posted September 6, 2022 Hey Shane, looks like there is a small bug when creating a collection, not a playlist and sort it by "Release date desc". The items are being shown "Release date asc", so the collection shows the same order on "Release date desc" and "Release date asc". BTW what is meanwhile about the collection issue, can I setup images for them now or is there still a bug in the core? Best regards Link to comment Share on other sites More sharing options...
horstepipe 356 Posted September 7, 2022 Share Posted September 7, 2022 I‘m wondering, would that plug-in also be able to create virtual libraries instead of playlists or collections? Link to comment Share on other sites More sharing options...
eeeeeesy 31 Posted September 7, 2022 Share Posted September 7, 2022 (edited) On 9/6/2022 at 8:06 AM, horstepipe said: Hey Shane, looks like there is a small bug when creating a collection, not a playlist and sort it by "Release date desc". The items are being shown "Release date asc", so the collection shows the same order on "Release date desc" and "Release date asc". BTW what is meanwhile about the collection issue, can I setup images for them now or is there still a bug in the core? Best regards how is it working at all for you? i cant even get the playlist to show up. are you on emby server 4.7.6.0? Edited September 7, 2022 by eeeeeesy Link to comment Share on other sites More sharing options...
koopa8840 23 Posted September 7, 2022 Share Posted September 7, 2022 On 9/5/2022 at 9:36 PM, eeeeeesy said: is this working in 4.7.6.0? Not sure what you are trying to achieve. If you want one playlist, named Decades, then set one year range from 1970 to 2009. However the way you have it set, the plugin is searching for ALL ranges in a file. Change it to ANY and check your results. ALL = AND ANY = OR 1 Link to comment Share on other sites More sharing options...
horstepipe 356 Posted September 8, 2022 Share Posted September 8, 2022 13 hours ago, eeeeeesy said: how is it working at all for you? i cant even get the playlist to show up. are you on emby server 4.7.6.0? Yes I‘m on that version. hmm the plug-in works fine here mostly. Though there seem to be some bugs around live playlist, didn’t take another look there, yet. Link to comment Share on other sites More sharing options...
eeeeeesy 31 Posted September 8, 2022 Share Posted September 8, 2022 20 hours ago, koopa8840 said: Not sure what you are trying to achieve. If you want one playlist, named Decades, then set one year range from 1970 to 2009. However the way you have it set, the plugin is searching for ALL ranges in a file. Change it to ANY and check your results. ALL = AND ANY = OR oh sweet that helped me out a bunch. its working now. is there a way to view them as a grid? Link to comment Share on other sites More sharing options...
koopa8840 23 Posted September 8, 2022 Share Posted September 8, 2022 3 hours ago, eeeeeesy said: oh sweet that helped me out a bunch. its working now. is there a way to view them as a grid? As far as I know, not for a Playlist, but a Collection shows as a grid. Link to comment Share on other sites More sharing options...
ShaneP 227 Posted September 11, 2022 Author Share Posted September 11, 2022 On 7/28/2022 at 4:52 PM, nuentes said: @ShaneP I want to make a playlist of all my 4K movies. Would it be possible to include resolution as a query-able variable? Hey @nuentes, Next release will have Resolution Height and Resolution Width which should give you what you need. On 7/29/2022 at 3:18 PM, koopa8840 said: @ShaneP I did more testing and found the error definitely occurs when moving files. I can disable the Live collection, move files, enable the Live collection and have no error. Also, when the error occurs you have to manually Refresh in order for Scheduled Refreshes to execute. Hey @koopa8840 I've changed a few things around how this works now, I was unable to replicate it though. So if the next release doesn't fix please can you give me more details... i.e. are you moving the across libraries ... etc... On 8/11/2022 at 2:53 PM, Emmanueld said: @ShanePA million thanks for this plugin!!! Is there any way Actor & Guest Star could be separate fields? Hey @Emmanueld What's the use case here? And Thanks!!! On 8/13/2022 at 5:14 AM, chowbok said: Is it just me, or is there no way to manually sort an existing smart playlist? If there is, how do I do it? Hey @chowbok Sorting on the playlist will only sort the new items that being added, as playlists could be large and sorting resource expensive it's best to set up a sort job to handle this in the background. On 8/13/2022 at 6:43 AM, chowbok said: No, I just mean invoke the sort on an existing playlist when I want to. Right now I only see how to do it on a timer. Correct. 1 Link to comment Share on other sites More sharing options...
ShaneP 227 Posted September 11, 2022 Author Share Posted September 11, 2022 On 9/3/2022 at 12:47 PM, Hawkwinter said: In theory, "Tag (Tree Crawl)" should do what you want. However, in practice I just tested it, and it doesn't seem to work. I put a tag on three "seasons" of a show (movies sorted as seasons), ran a basic playlist filter where all it did was a tree crawl check for that tag, and it only detected one item when it should have detected three. Hey @Hawkwinter In my tests this worked, can you give me more detail so I can replicate. Thanks again. Link to comment Share on other sites More sharing options...
ShaneP 227 Posted September 11, 2022 Author Share Posted September 11, 2022 On 9/5/2022 at 4:08 AM, BaiGanJia said: @ShaneP dear shaneP, is this possible to sort by added list asc? like movie1,movie2--->move250 and also I found a bug , when I making a new playlist, I added 250 items to the listzone, - Update type:manual - save - execute the system RAM,Memory usage soared to 11gb and broken down my serverPC, I mean:If add too many items, it will cause the execution to take up too much memory and cause a crash Hey @BaiGanJia, How many items are we talking about? I have a lib of +- 10 000 items and have not seen this, but then again, I have run smaller filters so it could be related to that. What does the log look like? (Also what criteria are you using, I can't seem to see from the screen shot.) I'm not sure how a "sort by list" would work because it would be sorting in the criteria you've selected. Criteria values are purely for filtering. What is the use case here? Thanks so much. Link to comment Share on other sites More sharing options...
horstepipe 356 Posted September 13, 2022 Share Posted September 13, 2022 On 9/6/2022 at 2:06 PM, horstepipe said: Hey Shane, looks like there is a small bug when creating a collection, not a playlist and sort it by "Release date desc". The items are being shown "Release date asc", so the collection shows the same order on "Release date desc" and "Release date asc". BTW what is meanwhile about the collection issue, can I setup images for them now or is there still a bug in the core? Best regards @ShaneP will you take a look at this little bug? Link to comment Share on other sites More sharing options...
koopa8840 23 Posted September 13, 2022 Share Posted September 13, 2022 7 hours ago, horstepipe said: @ShaneP will you take a look at this little bug? According to this, Collections do not support sorting. https://github.com/ShanePe/Emby.SmartPlaylist.Plugin/releases/tag/v2.3.0.0 Removed "Sort newly Added Items" for Collections as Collections cannot be sorted. 1 Link to comment Share on other sites More sharing options...
InaudibleDirge 6 Posted September 15, 2022 Share Posted September 15, 2022 Would it be possible to have a smart playlist pull titles from a trakt list so it would automatically update? Link to comment Share on other sites More sharing options...
Ninko 64 Posted September 15, 2022 Share Posted September 15, 2022 On 05/09/2022 at 08:39, BaiGanJia said: dear @ShaneP Is there a way to count the playback of all users instead of a single user? I would also be interested in this! Thanks Link to comment Share on other sites More sharing options...
BaiGanJia 21 Posted September 17, 2022 Share Posted September 17, 2022 (edited) On 9/12/2022 at 12:47 AM, ShaneP said: Hey @BaiGanJia, How many items are we talking about? I have a lib of +- 10 000 items and have not seen this, but then again, I have run smaller filters so it could be related to that. What does the log look like? (Also what criteria are you using, I can't seem to see from the screen shot.) I'm not sure how a "sort by list" would work because it would be sorting in the criteria you've selected. Criteria values are purely for filtering. What is the use case here? Thanks so much. I have a lib of 40000+ movie items I want to create a list for IMDB top 250,But I found that the sorting is not NO.1- no.250, it's sorted according to the title of the movie ======================about the Ram bug emby Ram。before: log.txt Edited September 17, 2022 by BaiGanJia Link to comment Share on other sites More sharing options...
chowbok 77 Posted September 18, 2022 Share Posted September 18, 2022 (edited) Never mind Edited September 18, 2022 by chowbok Link to comment Share on other sites More sharing options...
nuentes 33 Posted October 7, 2022 Share Posted October 7, 2022 I'd like to be able to join 2 playlists into one, and I can't figure out a way to do this. Any ideas? Here is my use case: I'm trying to perfect my Halloween playlist. I've got a playlist with the majority of what I want working perfectly. It pulls in episodes that include halloween in the title or Overview, as well as many other things. I also have a 2nd playlist of Horror-Comedy TV episodes. When I try to join the rules of the two playlists together into one smart playlist ruleset, I get flooded with WAY too many horror comedy episodes. This is because in my library, I have roughly the same number of horror-comedy episodes as I do Halloween-themed episodes. I want to combine the two playlists in a specific ratio. So I would have 2 helper playlists that feed into a 3rd playlist. The Halloween playlist would be limited to 100, the Horror Comedy playlist limited to 10. They would be joined into a single playlist limited down to 50. In theory, this should leave me with a playlist that is roughly 90% Halloween episodes, and about 10% Horror Comedy. If it's possible, I'd love to know. Otherwise, I think this might be a feature request. It's a niche request, and I definitely get that. Link to comment Share on other sites More sharing options...
Guest RXWatcher Posted October 9, 2022 Share Posted October 9, 2022 I'm totally new to smart playlists and Emby but is it possible to make a smart collection under a specific library? For example, I have a library called 'Foreign Films' and I want to make a collection for 'Bollywood' with a country code of 'hi' under the 'Foreign Films' Library. Thanks! Link to comment Share on other sites More sharing options...
koopa8840 23 Posted October 9, 2022 Share Posted October 9, 2022 5 hours ago, RXWatcher said: I'm totally new to smart playlists and Emby but is it possible to make a smart collection under a specific library? For example, I have a library called 'Foreign Films' and I want to make a collection for 'Bollywood' with a country code of 'hi' under the 'Foreign Films' Library. Thanks! If the films are in their own folder (X:\Movies\Foreign Films\[movie title folder]\, you can use 'Path\Filename', and filter for 'Foreign Films' and then filter the country code. Make sense? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now