kazeboy 0 Posted October 25, 2017 Posted October 25, 2017 Hey guys, mine is LG LH60200 , webOS 3.0 but can't find emby on LG Content Store ??? suggestion ?
monkeycoder 0 Posted October 25, 2017 Posted October 25, 2017 Ok If you have the logo that mean no transcoding. Can you tell me if the video is an MKV or MP4 file ? Thanks, Barnum MKVs, probably around 50-70gig, tried a few different ones, same results, DLNA works okay though. Cheers. N
mastrmind11 717 Posted October 25, 2017 Posted October 25, 2017 Hey guys, mine is LG LH60200 , webOS 3.0 but can't find emby on LG Content Store ??? suggestion ? That model number doesn't look right.
kazeboy 0 Posted October 25, 2017 Posted October 25, 2017 (edited) That model number doesn't look right. What's not right, it says 49LH60200GI-TD http://www.lg.com/ir/tvs/lg-49LH60200GI-led Just a bit on the Older model side. PS: It's a middle east model, but still using webOS 3.0 version 5 something. Edited October 25, 2017 by kazeboy
tmb4016 86 Posted October 25, 2017 Posted October 25, 2017 Great work guy's on the new LG app. Looks great and so far works like a charm, Well worth the wait. Thumbs up from me !!
mastrmind11 717 Posted October 25, 2017 Posted October 25, 2017 Thanks for the feedback. Luke, is it going to be a months long wait for the 1.0/2.0 re-submission to be approved, or are bug fixes on a faster approval track?
calexandre 0 Posted October 25, 2017 Posted October 25, 2017 @@Luke, should we keep posting issues on this thread or do you prefer that we open a new thread for each issue separately?
calexandre 0 Posted October 25, 2017 Posted October 25, 2017 where did you put your custom profile on the emby server? Regards, Barnum It is located in %USERPROFILE%\AppData\Roaming\Emby-Server\config\dlna\user
Luke 38528 Posted October 25, 2017 Posted October 25, 2017 The dlna profiles will have no effect on this app, fyi.
muppets4 24 Posted October 25, 2017 Posted October 25, 2017 can someone tell me how do i make emby remember the play position? i just played a few files and fast forward and exiting and went back in and it started from the beginning. You'll have to play for a while. Think it was five minutes or something. I think I've seen a setting somewhere for that on the server side of things?
Quiptix 2 Posted October 25, 2017 Posted October 25, 2017 Just installed. I noted that DTS sound isn't passed-through HDMI. With Screenplay it did... I don't see transcoding so I assume the new app does some transcoding on audio when it is DTS. Which is not needed. Haven't tried 4K, h265 or whatsoever. Thanks for the works
Luke 38528 Posted October 26, 2017 Posted October 26, 2017 Yea it looks like we don't have DTS enabled so we'll have to add that for the next release of the app, thanks.
barnum 5 Posted October 26, 2017 Posted October 26, 2017 The dlna profiles will have no effect on this app, fyi. I know, but with this modify profile, I can play 4k using dlna it's a workaround til the LG AP can do it Regards, Vincent
Quiptix 2 Posted October 26, 2017 Posted October 26, 2017 Yea it looks like we don't have DTS enabled so we'll have to add that for the next release of the app, thanks. I discovered a really small (not recommended) workaround. Disable audio transcoding in the user profile, then it is streamed as DTS. Somehow the app requests a AC3 stream. I have discovered a lot of buffering after couple of minutes even when Emby is on direct play and no transcode. On the server side it still "transcodes" the media. May be by design, but it gives apparently buffering after a while. Vincent
deiniol39 18 Posted October 26, 2017 Posted October 26, 2017 App working great. Did the untick trick to get 4K streams working.. More than happy. Greak work guys. Plex has now had a switch off :-) 1
Quiptix 2 Posted October 26, 2017 Posted October 26, 2017 (edited) App working great. Did the untick trick to get 4K streams working.. More than happy. Greak work guys. Plex has now had a switch off :-) If I can resolve (or de dev's) my buffering problem, even when transcoding is not needed, then I'm in the same spot as you are now. Little steps with great results. I have done some research. Buffering occurs definitely in the WebOS App because the server is almost idle when done with the "transcoding". After a couple of minutes, it starts buffering, mostly within 2 minutes. When I skip through the movie, buffering is gone (even on the scenes where it first buffered). Pressing pause and play doesn't resolve it. At this moment I understand why there is some transcoding. The MKV is "transcoded" into a TS stream. I'm at WebOS version 05.30.10, type LG UH850V Continued in https://emby.media/community/index.php?/topic/52272-buffering-stuttering-in-emby-lg-app/&do=findComment&comment=503979 Edited October 27, 2017 by Quiptix
syralk 12 Posted October 26, 2017 Posted October 26, 2017 Approved, but only for webos 3.0 devices. They reported an issue with 1.0 and 2.0 devices that we'll need to resolve. can you do a post when the issue with webos 1.0 and webos 2.0 is resolv ...thanks
barnum 5 Posted October 27, 2017 Posted October 27, 2017 It is located in %USERPROFILE%\AppData\Roaming\Emby-Server\config\dlna\user Thanks calexandre, I put your file in the "dlna\user" directory and I can view MKV HEVC video using DLNA Barnum
barnum 5 Posted October 27, 2017 Posted October 27, 2017 App working great. Did the untick trick to get 4K streams working.. More than happy. Greak work guys. Plex has now had a switch off :-) Can you explain me what did you do to have 4K streams working ? Thanks, Barnum
deiniol39 18 Posted October 27, 2017 Posted October 27, 2017 Can you explain me what did you do to have 4K streams working ? Thanks, Barnum
deiniol39 18 Posted October 27, 2017 Posted October 27, 2017 I followed Tickets 66 advice Barnum. Disable video and audio transcoding under user in settings. Sorry away form Mac so can’t give you a screenshot.
Luke 38528 Posted October 27, 2017 Posted October 27, 2017 Just be aware that will likely cause playback problems in other emby apps.
barnum 5 Posted October 27, 2017 Posted October 27, 2017 I followed Tickets 66 advice Barnum. Disable video and audio transcoding under user in settings. Sorry away form Mac so can’t give you a screenshot. Can you give me a screenshot when you can ? Thanks
Recommended Posts