Jump to content

The new Emby app for Windows & Xbox


image.png Long Promised — Long Awaited — Finally Here!

We are excited to announce the first release of our all-new range of Emby apps, starting today with Windows and Xbox. With a fully redeveloped native foundation, this update delivers improvements across the board: from remote control and gamepad support to background downloading (Windows), as well as refresh and HDR mode switching, and most importantly, enhanced video playback.

The new app also comes with a name change from Emby Theater to simply Emby.

The name is the only simplification though: On Windows it supersedes and replaces both current apps, "Emby Theater Desktop" and "Emby Theater" from the Windows store, combining the best of both in a single app. It provides enhanced video playback driven by MPV player under the hood, like and even better than "Emby Theater Desktop", and the Download features which were previously available in the Windows store app only.
A primary design goal has been to ensure that users of either previous app encounter no drawbacks when moving to the new version.

image.pngimage.png

 

Video Playback (Windows)

Video options in the previous ET Desktop app were not always straightforward. The new Emby app adopts a fundamentally different approach to video playback configuration, which accommodates to a range from least to most knowledgeable users by boiling quality options down to three simple and easy understandable presets alongside a custom mode which allows to control all the underlying options in detail. The main presets are:

  • High Quality
    A no-compromise choice for the best possible quality, regardless of resource usage. Recommended for powerful PCs with high-end GPUs. Video decoding and filtering occur in software for optimal quality, and output scaling uses custom GPU shaders.
     
  • Balanced
    The default and recommended choice for most users. Similar to ET Desktop and a standalone MPV player with default settings.
     
  • Efficiency Mode
    MPV player is generally focused on quality rather than power saving, and even with the Balanced preset, you can get short of energy rather quickly when running on batteries.
    This mode is not built-in or available in the regular MPV player. All video operations are fully performed in hardware while scaling at the video output (no shaders/gpu kernels) gets disabled.

Too simplistic for you? Enter the Customize mode where you can control all options in detail to find your perfect setup.

image.pngimage.png

 

Video Playback (Xbox)

In the new Xbox app, we have a new playback implementation which is based on ffmpeg and takes place of the HTML video playbaback which which had limited codec and format support. By combining ffmpeg decoding with elements from Windows Media capabilities, it combines the best of both worlds: The rich format and codec support from ffmpeg and the built-in hardware acceleration of the Xbox for playing 4k  and HDR videos in the best possible way

Sintel_DarklightWipe1.gifSintel_DarklightWipe2.gif

 

Automatic Refresh and HDR Mode Switching (Windows & Xbox)

Refresh rate switching is now as simple as enabling or disabling a single option. The new app can track its window position across multiple monitors and adapt the refresh rate accordingly. On both Windows and Xbox, it can also automatically toggle HDR mode based on the video content and the capabilities of your monitor and graphics hardware.

image.pngimage.png

 

Download Feature (Windows)

With the download feature, you can transfer media from your Emby Server to your client device in a suitable format and size, so you can enjoy your media when you're on the road or without an online connection and even automatically synchronize items based on the watched status.

The new Windows app implements this with a completely different approach. Instead of periodically polling and running in the background, it uses Windows Push Notifications for server-side activation and the Windows BITS (Background Intelligent Transfer) service for downloads. As a result, the app runs only briefly whenever the server notifies it about newly available items or when BITS reports a completed download.  If you don't use this feature, nothing runs in the background at all.

 

Enhanced Support for Remote Control and Gamepad Input (Windows & Xbox)

Remote Control support has been extended to cover almost all functions defined in the Windows Media Center remote button schema. For game controllers, mapping has also been expanded to assign functions to all available controls. New options pages provide a reference for button assignments and allow you to test inputs to ensure everything works as intended.

gamepad_winligh.pngremotecontrol_windark.png

 

Windows Theme (Windows)

As a visual highlight, the Windows app features a new and exclusive Windows theme with Mica material background (Win 11) and seamless integration with your Windows desktop appearance, matching theme colors and dark/light switching accordingly.

image.pngimage.png

 

High Contrast Themes (Windows)

As part of the Windows theme, the new Emby app also supports the Windows High Contrast settings. Fonts adjust in size and weight for better visibility, and fewer — but thicker—lines are drawn to enhance readability for those who need it.

image.pngimage.png

 

image.png

Edited by softworkz

  • Like 19
  • Thanks 4

52 Comments


Recommended Comments



stephen_hill

Posted

Awesome. Well-done on the new release.

Please can you provide a direct exe/msi installer download?

  • Like 4
softworkz

Posted

1 minute ago, stephen_hill said:

Please can you provide a direct exe/msi installer download?

Please see the FAQ here:

  • Facepalm 1
stephen_hill

Posted

@softworkzThanks.

  • Like 1
Korvenwin

Posted (edited)

Good update!!! Thank you but, is now possible to use external players like MPC-BE?

I still would LOVE to use sometimes madVR renders

Edited by Korvenwin
  • Like 1
softworkz

Posted

11 minutes ago, Korvenwin said:

Good update!!! Thank you but, is now possible to use external players like MPC-BE?

I still would LOVE to use sometimes madVR renders

It's not there yet but planned.

  • Like 1
Korvenwin

Posted

1 minute ago, softworkz said:

It's not there yet but planned.

And what about to open the new Emby player to use madVR render? This could be AWESOME and Emby would be the ULTIMATE media player.

Do you think that this could be possible?

AngelSing

Posted

Everything is very good, but it would be convenient to disable or turn off the introduction. Compared to the previous version or the web version, the start-up is too slow. Additionally, having to press a button to hide it is bothersome. This setting should be permanent, allowing the introduction to be turned off permanently and speeding up the start of Emby.

  • Like 1
  • Agree 2
SeasideGR

Posted (edited)

So what is best ? For HTPC the Theater (until EOL) or the new APP ?

Any plans for the PS5 ?

Edited by SeasideGR
HanSolo

Posted

Outstanding! Just installed it, looks good so far!

  • Like 1
PJM

Posted

Looks good, but very disappointed that you force a Windows account on us (Store app).  I use independent software like Emby to get away from big tech!

That being said it won't be an issue for me for long, down to 1 computer still running Windows and on schedule to kill my MS account by early next year.

  • Like 1
AngelSing

Posted

It is evident that the application startup is much slower than the previous version and the web version. As I mentioned before, I am now sharing a video that demonstrates this situation.

 

 

  • Like 1
  • Sad 1
  • Agree 2
SCV44281

Posted

Thank you for the hard work, this looks super slick!

  • Like 1
lightsout

Posted

@softworkz"We are excited to announce the first release of our all-new range of Emby apps" has there been any discussion of what other platforms are included in this all new range of apps?

  • Like 1
BigAl66

Posted (edited)

It works well on my HTPC. What I hate is, that App can be closed with the back key. This means I have to find the mouse to restart the App. This should be deactivated in TV mode at least. I usually never close the app on the TV (HTPC)…

Edited by BigAl66
softworkz

Posted

8 hours ago, AngelSing said:

Everything is very good, but it would be convenient to disable or turn off the introduction. Compared to the previous version or the web version, the start-up is too slow. Additionally, having to press a button to hide it is bothersome. This setting should be permanent, allowing the introduction to be turned off permanently and speeding up the start of Emby.

Hiding the animation does NOT speed up the startup. Startup is not delayed by the animation, the animation is there to cover the long startup. 

I've added an explanation to the FAQ: 

 

softworkz

Posted

6 hours ago, PJM said:

Looks good, but very disappointed that you force a Windows account on us (Store app).  I use independent software like Emby to get away from big tech!

We don't like that either! Please note that you DO NOT NEED a Microsoft Account!

I've added this to the FAQ Post with a link to a more detailed explanation: https://emby.media/community/index.php?/topic/134677-new-windows-xbox-app-faq/

  • Like 4
softworkz

Posted

5 hours ago, lightsout said:

@softworkz"We are excited to announce the first release of our all-new range of Emby apps" has there been any discussion of what other platforms are included in this all new range of apps?

There's a new single but modular cross-platform, cross-framework codebase which has been developed from scratch.

It covers UWP (Windows, Xbox), WinUI3 (Windows), Electron (Windows, Linux, Mac) and MAUI (Windows, MacCatalyst, iOS, Android and Tizen/Samsung).
Internally we have indeed 4 apps that run on Windows, the decision in favor of WunUI3 was made just half-way during development. The UWP(Xbox) app runs fine on Windows but has a number of drawbacks compared to the WinUI3 version. MAUI uses WinUI3 under the hood on Windows, but with increased complexity in code, so this path hasn't been followed. The Electron flavors are all running, but on Windows, it cannot compete with a WinUI3 app, especially with regards to window management and visual styles. 
The next official app from this code base is Emby Linux, the beta is starting right now. Please understand that further plans cannot be disclosed at this time.
Thanks.

  • Like 1
softworkz

Posted

1 hour ago, BigAl66 said:

It works well on my HTPC. What I hate is, that App can be closed with the back key. This means I have to find the mouse to restart the App. This should be deactivated in TV mode at least. I usually never close the app on the TV (HTPC)…

Keep complaining in the forums. This had been discussed internally and postponed to revisit based on user feedback

  • Agree 2
carbonbaseunit

Posted

I would have waited until HEVC was allowed to release.  It was driving me crazy trying to find out why my videos would not direct play.  That's a major limitation.

softworkz

Posted

7 minutes ago, carbonbaseunit said:

I would have waited until HEVC was allowed to release.  It was driving me crazy trying to find out why my videos would not direct play.  That's a major limitation.

Please see here: 

visproduction

Posted

FYI: Installs fine on Win 10 64bit, but not on Win 10 32bit workstation with 3GB RAM.  Both workstations accessed MS Store.

  Sorry about that!
  Something went wrong. We're aware of the issue...
  Code 0x80073CF9

32bit No logs listed in user's account.

softworkz

Posted

22 minutes ago, visproduction said:

FYI: Installs fine on Win 10 64bit, but not on Win 10 32bit workstation with 3GB RAM.  Both workstations accessed MS Store.

  Sorry about that!
  Something went wrong. We're aware of the issue...
  Code 0x80073CF9

32bit No logs listed in user's account.

What's your exact Win 10 version?

davidb7170

Posted

Quick question - on the windows Emby Theatre version and downloads. I remember setting up a download folder location before, but do not see where to set that on my PC in Emby Theatre now, or when managing Emby Server with the web app. My friend and I discuss and try different renderings etc., so exchange files pretty often. the download procedure was pretty useful, but now cannot find where the files were downloaded to on my machine from his...

I apparently am missing something. I set up new drives periodically, and have done this in the past, but I see the download feature is mentioned in your description in the announcement above.

Please advise, Thanks!

 

softworkz

Posted

@davidb7170

Go to Settings >> About

There you will see the "Data Path"

Selection of a custom folder is planned for a future update.


Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...