Jump to content
arche

HDHomeRun Firmware Update

Recommended Posts

arche

Just in case, they released a firmware update a few days ago.

 

  • HDTC-2US/HDHR5-2US/HDHR5-4US: Demodulator firmware update – fixes reception problems for WTVD.
  • HDHR3-CC: Fix problem where disabled channels could self re-enable when the background scan ran if the channel disappeared from the lineup and later reappeared.
  • HDTC-2US: Drop unused gateway UPnP probe/control support.
  • ALL: Add X-HDHomeRun-Resource header to video HTTP response to indicate the tuner number.
  • ALL: Add /status.json to report tuner status in a machine readable format.

https://www.silicondust.com/support/downloads/firmware-changelog/

Edited by arche
  • Like 3

Share this post


Link to post
Share on other sites
WilhelmStroker

Thanks for the tip. Just upgraded, so far so good.

Share this post


Link to post
Share on other sites
mediacowboy

I would be happier with the prime 6 being announced.

  • Like 1

Share this post


Link to post
Share on other sites
roberthleeii

I would be happier with the prime 6 being announced.

I just saw this. Have they announced pricing? I want one

 

 

Sent from my SM-N960U using Tapatalk

Share this post


Link to post
Share on other sites
arche

I just saw this. Have they announced pricing? I want one

 

Rumor was $199. Not sure if this is fact yet or not.

Share this post


Link to post
Share on other sites
roberthleeii

I sent an email directly to them and they said $199 but no relese date, still working on it.

Share this post


Link to post
Share on other sites
mediacowboy

I'm not holding my breath. They have been promising a single unit 6 tuner 1 cable card since 2015 or something like that.

Edited by mediacowboy
  • Like 1

Share this post


Link to post
Share on other sites
arche

After @@cayars point out here https://emby.media/community/index.php?/topic/72143-growing-drm-channels/?p=726546 about the interface speed, I've been second guessing whether or not to just get another prime 3, among the rest of the discussion in that thread. My thoughts have really changed on the prime 6 after others pointed out my misconception of the prime 6. Not sure it's worth it.

Share this post


Link to post
Share on other sites
mediacowboy

After @@cayars point out here https://emby.media/community/index.php?/topic/72143-growing-drm-channels/?p=726546 about the interface speed, I've been second guessing whether or not to just get another prime 3, among the rest of the discussion in that thread. My thoughts have really changed on the prime 6 after others pointed out my misconception of the prime 6. Not sure it's worth it.

Even though I am not holding my breath for the prime 6 that will be the only option. The parts to make a new prime 3 are no longer available.

Share this post


Link to post
Share on other sites
arche

Even though I am not holding my breath for the prime 6 that will be the only option. The parts to make a new prime 3 are no longer available.

 

Ebay and Craigslist are the only option to buy a used one.

  • Like 1

Share this post


Link to post
Share on other sites
arche

Not sure if anyone noticed, as I just noticed. Another firmware update to HDHomeRun Prime (for me at least). 

 

Release 20190621:
  • SCRIBE production release firmware.
  • SERVIO production release firmware.
  • HDTC-2US/HDHR5-2US/HDHR5-4US: Demodulator firmware update.
  • ALL: Fix handling of HTTP/UPnP requests that immediately disconnect without waiting for a response.
  • ALL: Enforce use of HTTP-POST for operations that change configuration.

https://www.silicondust.com/support/downloads/firmware-changelog/

Share this post


Link to post
Share on other sites
Luke

Thanks for the update.

Share this post


Link to post
Share on other sites
arche

Just in case anyone missed it, firmware update 20200225:

 

Release 20200225:
  • Add MDNS support for hdhomerun.local and hdhr-xxxxxxxx.local (where xxxxxxxx is the device id). Open a web browser and enter http://hdhomerun.local/ to bring up the device webpage.
  • Remember user favorite/disable channel selection even if a channel goes away or a new scan is requested.
  • Detect HD HEVC channels and indicate HEVC channels on the channel lineup webpage.
  • DeviceAuth changed to not require escaping when passed as a URL parameter.
  • Update to latest HTTPS/TLS root certs.
  • Remove unused PnPX announcements.
  • Improvements to diagnostic logging.
  • SCRIBE/SERVIO: Add download links to recorded files webpage.
  • SCRIBE/SERVIO: Fix problem where new recordings may not show after deleting a recording.
  • HDHR5/SCRIBE/SERVIO: Fix problem where Ethernet link speed was incorrectly reported for non-100f speeds.
  • DT/IS models: Clean up modulation reporting.
  • HDHR3-CC: Include virtual channel number and name in tuner status json.
  • HDHR3-CC: Fix problem where channel could self enable after being disabled by the user.
  • LEGACY models: Fix sequence number generation when generating PAT tables.
  • LEGACY models: DeviceAuth changed to not require escaping when passed as a URL parameter.

https://www.silicondust.com/support/downloads/firmware-changelog/

  • Like 1

Share this post


Link to post
Share on other sites
Sammy

 

 

Just in case anyone missed it, firmware update 20200225:

Release 20200225:

  • Add MDNS support for hdhomerun.local and hdhr-xxxxxxxx.local (where xxxxxxxx is the device id). Open a web browser and enter http://hdhomerun.local/ to bring up the device webpage.
  • Remember user favorite/disable channel selection even if a channel goes away or a new scan is requested.

  • Detect HD HEVC channels and indicate HEVC channels on the channel lineup webpage.
  • DeviceAuth changed to not require escaping when passed as a URL parameter.
  • Update to latest HTTPS/TLS root certs.
  • Remove unused PnPX announcements.
  • Improvements to diagnostic logging.
  • SCRIBE/SERVIO: Add download links to recorded files webpage.
  • SCRIBE/SERVIO: Fix problem where new recordings may not show after deleting a recording.
  • HDHR5/SCRIBE/SERVIO: Fix problem where Ethernet link speed was incorrectly reported for non-100f speeds.
  • DT/IS models: Clean up modulation reporting.
  • HDHR3-CC: Include virtual channel number and name in tuner status json.
  • HDHR3-CC: Fix problem where channel could self enable after being disabled by the user.
  • LEGACY models: Fix sequence number generation when generating PAT tables.
  • LEGACY models: DeviceAuth changed to not require escaping when passed as a URL parameter.
https://www.silicondust.com/support/downloads/firmware-changelog/

"[*]Detect HD HEVC channels and indicate HEVC channels on the channel lineup webpage."

 

Does this mean it'll tune these or just report the existence of the encode?

 

 

 

Sent from my SM-G960U1 using Tapatalk

Share this post


Link to post
Share on other sites
arche
Posted (edited)

As always, just in case anyone has missed it, firmware update 20200521

 

Release 20200521:

  • DVBT/ISDBT models: backwards compatibility for old modualtion strings.
  • HDVR/HHDD models: recorded_files defaults to returning the root / top-level-recorded list.
  • All models: support for multiple sub-channels sharing the same video pid.
  • All models: require UPnP GENA event URL IP address match the IP address requesting the subscription.
  • All models: add MDNS support for xxxxxxxx.local where xxxxxxxx is the device id.

https://www.silicondust.com/support/downloads/firmware-changelog/

Edited by arche
  • Like 1

Share this post


Link to post
Share on other sites
arche

Just a heads up, firmware update 20200907

Release 20200907:

  • HDHR3-CC: workaround headend problem seen on Altice/Optimum plant in Long Island causing periodic picture breakup.
  • HDHR5-2US/4US: fix problem reporting correct signal level on some units.
  • HDHR5-2DT/4DT: add DVB-C support.
  • HDVR/HHDD models: add support for WDC drives.
  • All models: support discovery via multicast.
  • All models: report network rate in status.json.
  • All models: improvements to LED indicators.

Firmware Changelog

  • Thanks 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...