Remote access to the server on windows 10 is not available

[DEaD_EGORKA 0]

In the morning I can not connect remotely to the home server. The settings did not change, the antivirus was turned off, the port was forwarded in the router. There is simply no connection through emby connect, not directly. And the connection attempts were made both through the browser and through the application on the android phone. What could be the problem? http://www.canyouseeme.org/ shows "connection timed out"

Edited October 30, 2018 by DEaD_EGORKA

[ebr 15576]

Perhaps the local or remote IP address changed.

 

This is something with your network configuration as opposed to anything with the server.

 

Thanks.

[DEaD_EGORKA 0]

Perhaps the local or remote IP address changed.

 

This is something with your network configuration as opposed to anything with the server.

 

Thanks.

local ip was not changed. in the local network, a fixed permanent IP is assigned to the PC on which the server is installed

in the local network, a fixed permanent IP is assigned to the PC on which the server is installed. remote ip has changed, but it also does not enter

Edited October 30, 2018 by DEaD_EGORKA

[ebr 15576]

Your ISP may be blocking the external port now.

[DEaD_EGORKA 0]

Your ISP may be blocking the external port now.

 

according to information from the provider, all ports are open

Edited October 30, 2018 by DEaD_EGORKA

[mastrmind11 722]

well according to a port scan of that WAN IP, nothing is open.  Since you can't get past your router, this has exactly zero to do with Emby.

[DEaD_EGORKA 0]

netstat shows

http://joxi.ru/ZrJla5vc95a392

Edited October 30, 2018 by DEaD_EGORKA

[DEaD_EGORKA 0]

well according to a port scan of that WAN IP, nothing is open.  Since you can't get past your router, this has exactly zero to do with Emby.

 

I applied the screenshot above, port forwarding is configured on the router

[Guest asrequested]

My suggestion would be to not assume that nothing has changed, and do an end to end check, as though you were setting it up for the first time.