neik 837 Posted July 29, 2020 Share Posted July 29, 2020 Am I blind or isn't this available in the catalog? Given that quite a few people are using it and apparently it's stable, it would be great to have it there to receive possible updates instantly and not having to check for them and side-load them. @MikePlanet, have you already requested to get it there? @Luke, could you help here please? Link to comment Share on other sites More sharing options...
rbjtech 4289 Posted July 29, 2020 Share Posted July 29, 2020 15 hours ago, M3th0s said: Yes, if all versions of a movie are under a folder, then emby will group them and it'll show a single movie view. However without this addon, if they are in different folder, say 1080p and 4k, then emby will show 2 movie posters. With this plugin, it'll show 1 movie poster, then you can use granular folder permissions to give users access to both folders or just one depending on their device/connection capabilities. Hope this makes sense? A further question if I may. Do the users without permission get to see the alternative versions in the list for which they have no access to ? if yes, and they try and play that version - does it reject gracefully ? I'm keen to try this as I have a separate 4K library due to permissions but don't want users complaining they can't play the 4K Remux remotely ! Thanks Link to comment Share on other sites More sharing options...
M3th0s 14 Posted July 29, 2020 Share Posted July 29, 2020 14 minutes ago, rbjtech said: A further question if I may. Do the users without permission get to see the alternative versions in the list for which they have no access to ? if yes, and they try and play that version - does it reject gracefully ? I'm keen to try this as I have a separate 4K library due to permissions but don't want users complaining they can't play the 4K Remux remotely ! Thanks This was an issue initially but got fixed (thanks @Luke!). So if under folder permissions you don't give users access to a certain folder they only see the versions they're allowed to see 1 Link to comment Share on other sites More sharing options...
M3th0s 14 Posted July 29, 2020 Share Posted July 29, 2020 4 hours ago, neik said: Am I blind or isn't this available in the catalog? Given that quite a few people are using it and apparently it's stable, it would be great to have it there to receive possible updates instantly and not having to check for them and side-load them. @MikePlanet, have you already requested to get it there? @Luke, could you help here please? Seconding this. Either make this a permanent plugin or bring it inline with emby in the same way TV Shows are already doing 2 Link to comment Share on other sites More sharing options...
rbjtech 4289 Posted July 29, 2020 Share Posted July 29, 2020 (edited) 31 minutes ago, M3th0s said: This was an issue initially but got fixed (thanks @Luke!). So if under folder permissions you don't give users access to a certain folder they only see the versions they're allowed to see Perfect - many thanks - gonna give this a spin edit - all good, multi-versions for those with permissions - exactly what it should do out the box. Thanks @MikePlanet Edited July 29, 2020 by rbjtech 1 Link to comment Share on other sites More sharing options...
M3th0s 14 Posted July 29, 2020 Share Posted July 29, 2020 Just now, rbjtech said: Perfect - many thanks - gonna give this a spin Don't forget to backup first, just in case Link to comment Share on other sites More sharing options...
neik 837 Posted July 29, 2020 Share Posted July 29, 2020 1 hour ago, M3th0s said: it inline with emby in the same way TV Shows are already doing Having it natively in Emby would even be better. Link to comment Share on other sites More sharing options...
rbjtech 4289 Posted July 30, 2020 Share Posted July 30, 2020 So just a follow up - this plugin has made the big question of how to manage 4K content SOOOOO much easier. I've now been able to delete my multiple '4K Collection' versions and keep them all in a single collection (along with the 1080p versions etc) and clients only see what they are permissioned to see from that one collection. BINGO ... I'm really not sure why this is not in the Core code - is there a technical reason as presumably, it's just matching tmdb ID's ? 2 Link to comment Share on other sites More sharing options...
Luke 37118 Posted July 30, 2020 Share Posted July 30, 2020 It just hasn't been done yet. 1 Link to comment Share on other sites More sharing options...
Zanarkand 0 Posted August 3, 2020 Share Posted August 3, 2020 Doesn't this work for Emby server 4.4.3.0? How would I need to install it on Windows? I copied manually the dll in two folders about plugins here: C:\Users\Admin\AppData\Roaming\Emby-Server , then I reset the server but films are still duplicated. Thanks in advance. Link to comment Share on other sites More sharing options...
rbjtech 4289 Posted August 4, 2020 Share Posted August 4, 2020 (edited) 4.4.3.0 is fine as that's the stable release. Do you see the plugin in the Plugin Area on your dashboard ? It should say Auto Movie Version Collections v1 ? If yes, then have a look in the logs for - "Info Auto Movie Version Collections:" and see what it is doing. It runs on a schedule, but unfortunately it's not configurable nor in the schedule section on the Admin page - but mine ran immediately as I restarted the server. Edited August 4, 2020 by rbjtech Link to comment Share on other sites More sharing options...
M3th0s 14 Posted September 22, 2020 Share Posted September 22, 2020 (edited) Has anyone tried this with the new stable release (4.5.0.50) and is it safe to update? Thanks in advance EDIT: Although to be fair, still waiting for this to be included as default! Edited September 22, 2020 by M3th0s Link to comment Share on other sites More sharing options...
Incarniac 2 Posted September 22, 2020 Share Posted September 22, 2020 Yep, just updated and it works just fine and grouped movies like it has before. 2 Link to comment Share on other sites More sharing options...
M3th0s 14 Posted September 23, 2020 Share Posted September 23, 2020 10 hours ago, Incarniac said: Yep, just updated and it works just fine and grouped movies like it has before. Thanks for confirming Link to comment Share on other sites More sharing options...
bakes82 90 Posted October 3, 2020 Share Posted October 3, 2020 Is there a github for this? Link to comment Share on other sites More sharing options...
lorac 100 Posted October 4, 2020 Share Posted October 4, 2020 No. Link to comment Share on other sites More sharing options...
bakes82 90 Posted October 4, 2020 Share Posted October 4, 2020 Yeah I know, but I see hes on github so it might be private and maybe he can make public or push it to github for us. Does this look right? It seems to duplicate one of the versions Link to comment Share on other sites More sharing options...
lorac 100 Posted October 4, 2020 Share Posted October 4, 2020 It doesn't look right but it could also be that the movie itself is duplicated. Of course one also wonders one would need three different 4K versions. Link to comment Share on other sites More sharing options...
Happy2Play 8303 Posted October 4, 2020 Share Posted October 4, 2020 3 hours ago, bakes82 said: Yeah I know, but I see hes on github so it might be private and maybe he can make public or push it to github for us. Does this look right? It seems to duplicate one of the versions If you scroll down to Media Info, is it actually showing item with duplicate path? Link to comment Share on other sites More sharing options...
bakes82 90 Posted October 5, 2020 Share Posted October 5, 2020 Yes but it’s duplicated but one has no other info but the path. first one Second one Link to comment Share on other sites More sharing options...
Happy2Play 8303 Posted October 5, 2020 Share Posted October 5, 2020 1 hour ago, bakes82 said: Yes but it’s duplicated but one has no other info but the path. first one Second one So to me that would mean that item ended up in Emby Database twice with two different item ids. If possible you would move that item out of its location, scan to remove it from Emby, then re-add the item. Unless you feel like poking around in a back copy of Emby's database. Link to comment Share on other sites More sharing options...
fuzzynet 1 Posted October 10, 2020 Share Posted October 10, 2020 @Luke when do you think it will be added to the Emby Plugin Catalog? Link to comment Share on other sites More sharing options...
M3th0s 14 Posted October 10, 2020 Share Posted October 10, 2020 Anyone tried this plugin with the latest version yet? (4.5.2.0) Link to comment Share on other sites More sharing options...
Happy2Play 8303 Posted October 10, 2020 Share Posted October 10, 2020 10 minutes ago, M3th0s said: Anyone tried this plugin with the latest version yet? (4.5.2.0) No reason it should not work as it worked on 4.5.0.50. Link to comment Share on other sites More sharing options...
neik 837 Posted October 11, 2020 Share Posted October 11, 2020 16 hours ago, fuzzynet said: @Luke when do you think it will be added to the Emby Plugin Catalog? Unfortunately, never, I guess. This has been around for about 2 years now and it's still not there. Sadly, I wouldn't hold my breath for it... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now