krustyreturns 191 Posted September 28, 2018 Share Posted September 28, 2018 No, I have just been experimenting with the last version you pushed. Link to comment Share on other sites More sharing options...
Luke 37064 Posted September 29, 2018 Share Posted September 29, 2018 Is anyone here running the beta server? Link to comment Share on other sites More sharing options...
krustyreturns 191 Posted September 29, 2018 Share Posted September 29, 2018 (edited) I will, I know I should be anyway. Is there still a way to get the beta from the dashboard, if so I am too dense to figure it out. edit> never mind Edited September 29, 2018 by krustyreturns Link to comment Share on other sites More sharing options...
krustyreturns 191 Posted September 29, 2018 Share Posted September 29, 2018 @@Luke version 3.6.0.49 seems to solve the problem reported by @@Steveo369 (thanks). fyi: playing recordings as urls (instead of using direct file access) still doesn't work. Link to comment Share on other sites More sharing options...
Luke 37064 Posted September 29, 2018 Share Posted September 29, 2018 Thanks for confirming. Is the error any different? Do you still get the undefined entry? Link to comment Share on other sites More sharing options...
krustyreturns 191 Posted September 29, 2018 Share Posted September 29, 2018 Right, with direct file access you don't get an 'undefined' entry. Actually the whole 'version' field that had the dropdown menu with 'undefined' as one of the choices is not there, if that makes any sense.. And closing the file is not needed. Link to comment Share on other sites More sharing options...
krustyreturns 191 Posted September 29, 2018 Share Posted September 29, 2018 Or were you asking about url access? Link to comment Share on other sites More sharing options...
Luke 37064 Posted September 29, 2018 Share Posted September 29, 2018 Url. Is the server error the same? Link to comment Share on other sites More sharing options...
krustyreturns 191 Posted September 29, 2018 Share Posted September 29, 2018 Different, but the behavior is weird so I'm not positive. With url turned on for recordings in serverwmc, what happens then is: 1) when I click the recording icon to get information, emby starts the stream in serverwmc even though I have not requested to play the file. 2) in the information display that is shown, the 'Version' field has a dropdown with two choices both are 'undefined'. 3) if I hit play from this screen, the screen changes to a play screen but the stream never starts, it just shows the wait symbol. Also on the serverwmc side, another play request is not received from emby, it only shows the one stream request that was started in (1) 4) the back button in chrome does not navigate away from the play screen it is stuck there. I have to close chrome. Want logs? Link to comment Share on other sites More sharing options...
Luke 37064 Posted September 29, 2018 Share Posted September 29, 2018 Yea the server log would be great, thanks. Link to comment Share on other sites More sharing options...
krustyreturns 191 Posted September 29, 2018 Share Posted September 29, 2018 (edited) Here is the log from doing the steps I outlined before: log.txt Edited September 30, 2018 by krustyreturns Link to comment Share on other sites More sharing options...
muranoone 0 Posted September 29, 2018 Share Posted September 29, 2018 Hey everyone, i just was reading this awesome thread and i see all these replies... i wanted to chime in and update everyone that i had put a band-aid on my situation with streaming and recording. Luke had mentioned earlier in a reply to one of my posts something about the TYPE of media i had setup my RecTV Folder with. Originally I had set it up as "TV Show's" that doesn't work properly for RecTV Files from WMC. So i tried what Luke had suggested and it did allow me to see the RecTV Shows properly, no more "undefinded" attributes for the RecTV files in WMC via the Emby library folder. The setup i used and worked is "Home Video & Photo's" as my Emby Library 'RecTV" Folder. Now all the Records show "Dolby Digital 5.1" attribute as the media audio type. I can now view RecTV files any where in Emby environment including AppleTV 4K streaming, in the actual interface too no more launching from a separate device to view them as i noted in earlier posts regarding streaming issues to local devices. So the only caveat is that viewing the actual items in Emby App via Windows in a browser or AppleTV 4K App is that files are a generic thumbnail which it looks like maybe a quick random snapshot of a scene in the file and the name is the WMC native recording data. No sorting by series or episodes which i figure because of the "Home Video's & Photos's" folder attribute probably doesn't care for that. So like i said for me and the family its a band-aid and it works, till we get back to the original way RecTV files were handled would be nice! Anything needed let me know how i can help. Link to comment Share on other sites More sharing options...
Sammy 735 Posted September 30, 2018 Author Share Posted September 30, 2018 Just installed the latest ServerWMC package and re-installed ServerWMC Plugin on my Emby Server. Will my scheduled recordings with just Emby still work? Can I force them to record in .ts format as .wtv takes a lot longer for Handbrake to process. Can I not have ServerWMC Recordings (or any recordings for that matter) on my Home Screen as I'd rather wait until the recordings are processed before having them show up in my library. Thanks! Link to comment Share on other sites More sharing options...
Sammy 735 Posted September 30, 2018 Author Share Posted September 30, 2018 Hey everyone, i just was reading this awesome thread and i see all these replies... i wanted to chime in and update everyone that i had put a band-aid on my situation with streaming and recording. Luke had mentioned earlier in a reply to one of my posts something about the TYPE of media i had setup my RecTV Folder with. Originally I had set it up as "TV Show's" that doesn't work properly for RecTV Files from WMC. So i tried what Luke had suggested and it did allow me to see the RecTV Shows properly, no more "undefinded" attributes for the RecTV files in WMC via the Emby library folder. The setup i used and worked is "Home Video & Photo's" as my Emby Library 'RecTV" Folder. Now all the Records show "Dolby Digital 5.1" attribute as the media audio type. I can now view RecTV files any where in Emby environment including AppleTV 4K streaming, in the actual interface too no more launching from a separate device to view them as i noted in earlier posts regarding streaming issues to local devices. So the only caveat is that viewing the actual items in Emby App via Windows in a browser or AppleTV 4K App is that files are a generic thumbnail which it looks like maybe a quick random snapshot of a scene in the file and the name is the WMC native recording data. No sorting by series or episodes which i figure because of the "Home Video's & Photos's" folder attribute probably doesn't care for that. So like i said for me and the family its a band-aid and it works, till we get back to the original way RecTV files were handled would be nice! Anything needed let me know how i can help. Yes. These items need fixing. Even after running some old .wtv files through MCEBuddy / Handbrake they look like in your screenshot. Since I just installed ServerWMC, I may run a separate Emby Server to test rather than run it on my Production Server. Link to comment Share on other sites More sharing options...
Sammy 735 Posted October 1, 2018 Author Share Posted October 1, 2018 So I set up a separate Emby Server, loaded epg123 into WMC and ServerWMC into Emby then scheduled some series recordings in Emby. I will report back my findings.. Sent from my SM-G930P using Tapatalk Link to comment Share on other sites More sharing options...
Luke 37064 Posted October 1, 2018 Share Posted October 1, 2018 Here is the log from doing the steps I outlined before: @@krustyreturns, I will look into this soon, thanks. 1 Link to comment Share on other sites More sharing options...
krustyreturns 191 Posted October 2, 2018 Share Posted October 2, 2018 Thanks. No rush. 1 Link to comment Share on other sites More sharing options...
lharris 3 Posted October 27, 2018 Share Posted October 27, 2018 (edited) Just checking in, have we found a cause or work around for the missing file argument after ffmpeg.exe? 2018-10-27 01:10:02.314 Info App: C:\Users\emby\AppData\Roaming\Emby-Server\system\ffmpeg.exe -i file:"" -threads 0 -sn -codec:v:0 libx264 -pix_fmt yuv420p -preset veryfast -crf 23 -maxrate 139808000 -bufsize 279616000 -profile:v high -level 4.1 -x264opts:0 subme=0:me_range=4:rc_lookahead=10:me=dia:no_chroma_me:8x8dct=0:partitions=none -force_key_frames "expr:if(isnan(prev_forced_t),eq(t,t),gte(t,prev_forced_t+3))" -copyts -vsync -1 -codec:a:0 libmp3lame -ac 2 -ab 192000 -f segment -max_delay 5000000 -avoid_negative_ts disabled -map_metadata -1 -map_chapters -1 -start_at_zero -segment_time 3 -individual_header_trailer 0 -segment_format mpegts -segment_list_type m3u8 -segment_start_number 0 -segment_list "C:\Users\emby\AppData\Roaming\Emby-Server\programdata\transcoding-temp\b91104c9da324ee0cf3dff4d7c79c881.m3u8" -y "C:\Users\emby\AppData\Roaming\Emby-Server\programdata\transcoding-temp\b91104c9da324ee0cf3dff4d7c79c881%d.ts" 2018-10-27 01:10:02.495 Error HttpServer: Error processing request *** Error Report *** Version: 3.5.3.0 Command line: C:\Users\emby\AppData\Roaming\Emby-Server\system\EmbyServer.dll -service Operating system: Microsoft Windows NT 6.2.9200.0 64-Bit OS: True 64-Bit Process: True User Interactive: True Processor count: 8 Program data path: C:\Users\emby\AppData\Roaming\Emby-Server\programdata Application directory: C:\Users\emby\AppData\Roaming\Emby-Server\system System.Exception: Error starting ffmpeg at Emby.Server.MediaEncoding.Api.BaseStreamingService.StartFfMpeg(StreamState state, String outputPath, EncodingOptions encodingOptions, CancellationTokenSource cancellationTokenSource, Boolean acquireResources) at Emby.Server.MediaEncoding.Api.Hls.DynamicHlsService.GetDynamicSegment(StreamRequest request, String segmentId) at Emby.Server.Implementations.Services.ServiceExecGeneral.GetTaskResult(Task task) at Emby.Server.Implementations.Services.ServiceHandler.ProcessRequestAsync(HttpListenerHost appHost, IRequest httpReq, IResponse httpRes, ILogger logger, String operationName, CancellationToken cancellationToken) at Emby.Server.Implementations.HttpServer.HttpListenerHost.RequestHandler(IHttpRequest httpReq, String urlString, String host, String localPath, CancellationToken cancellationToken) System.Exception at Emby.Server.MediaEncoding.Api.BaseStreamingService.StartFfMpeg(StreamState state, String outputPath, EncodingOptions encodingOptions, CancellationTokenSource cancellationTokenSource, Boolean acquireResources) at Emby.Server.MediaEncoding.Api.Hls.DynamicHlsService.GetDynamicSegment(StreamRequest request, String segmentId) at Emby.Server.Implementations.Services.ServiceExecGeneral.GetTaskResult(Task task) at Emby.Server.Implementations.Services.ServiceHandler.ProcessRequestAsync(HttpListenerHost appHost, IRequest httpReq, IResponse httpRes, ILogger logger, String operationName, CancellationToken cancellationToken) at Emby.Server.Implementations.HttpServer.HttpListenerHost.RequestHandler(IHttpRequest httpReq, String urlString, String host, String localPath, CancellationToken cancellationToken) Edited October 27, 2018 by lharris Link to comment Share on other sites More sharing options...
Luke 37064 Posted October 27, 2018 Share Posted October 27, 2018 i'm not sure there's been an update yet, but you can always add your recordings folder as a regular emby library . thanks. Link to comment Share on other sites More sharing options...
eskador 2 Posted December 6, 2018 Share Posted December 6, 2018 (edited) Having the same issue - adding the folder to the Emby library is a workaround, though its a whole lot of fun to have to select the "episodes" tab since "shows" won't show anything, and then scroll thru the hundreds of recorded TV shows to find the one to play since it doesn't group any of the shows into folders. Is the bug on ServerWMC side or Emby? Edited December 6, 2018 by eskador Link to comment Share on other sites More sharing options...
krustyreturns 191 Posted December 8, 2018 Share Posted December 8, 2018 In my humble opinion its on emby side. The urls that swmc is handing back to emby for some reason, no longer work. Nothing has changed on the swmc side. Link to comment Share on other sites More sharing options...
Luke 37064 Posted December 8, 2018 Share Posted December 8, 2018 Is anyone running the beta server that can try the plugin again? We can take a fresh look at the current state of affairs. Thanks. Link to comment Share on other sites More sharing options...
Sammy 735 Posted December 8, 2018 Author Share Posted December 8, 2018 Is anyone running the beta server that can try the plugin again? We can take a fresh look at the current state of affairs. Thanks.I'll give it a go but sure like where things are going with the native Emby DVR! Sent from my SM-G960U1 using Tapatalk Link to comment Share on other sites More sharing options...
Luke 37064 Posted December 8, 2018 Share Posted December 8, 2018 Thanks. Link to comment Share on other sites More sharing options...
Sammy 735 Posted December 9, 2018 Author Share Posted December 9, 2018 Just wanted to report in.. I installed the plugin. I can view the channels in the guide and watch them. I can set them to record. I cannot playback something after it was recorded and get just the spinning wheel. I'm short on time right now but will try again tomorrow and post logs. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now