Jump to content

Recommended Posts

Posted

Ok, our package is for x64 models at this time, sorry.

Posted

Will you ever support the platform?

Posted

X86? It's possible for the future. Thanks.

Posted

Unfortunately, the latest emby program in emroid can't be used with version 3.2.70.0. I can't install newer ones. When will it be resolved to install the latest server file on the x86 platform?

  • 2 months later...
throgmorton
Posted

Tried this again with the latest mod ( 3.5.2.0 ) on my Thecus N5550.

So current status, the server software WORKS! Great news and is a lot faster than the older pre .Net Core versions.

 

But, the Thecus OS still does not like the current mod version very much... after installation of the mod, you need to 'start' the module in the thecus manual application installation area.

This gives no feedback after trying for a while... a good working mod will tell you that it has been started. Trying to start it again results in nothing.

But this does actually trigger the software to run! So even though you get no feedback in the thecus admin area, the mod is actually running and working.

 

Secondly if you reboot the NAS, you need to trigger the start manually again, because after reboot thecus OS will tell you the emby server mod restarting is not working.

 

So overall, it works, but it needs to be trigger manually to start ( even after NAS reboot ) and you won't see visual confirmation in the thecus admin panel.

 

So @@Luke thought I would try again and give some feedback and I'm having a very similar experience as @Glenn:

 

Thecus N7770-10G w/ firmware version: V2.06.03.1 (2018-11-16)

Emby Server Package: emby-server-thecus_4.1.0.1_x86_64.mod

 

Basically as Glenn states the software installs properly and once you click to start the module it seems to respond correctly with the caveat that it never gets a response that the module has started (in the admin panel).

 

The one difference between Glenn's version is that if I reboot the machine it seems to stall the machine during bootup.  What I assume is happening is that it tries to start the Emby module but never receives a response back that it started and so just hangs there.  A successive reboot seems to boot the machine normally, but I would need to restart the Emby Server module manually as Glenn stated.

 

I think its very close to functional, there is just something missing telling the Thecus unit that the module successfully started.

Posted

That's interesting, thanks for the info.

  • 4 weeks later...
Posted (edited)

remove

Edited by irinel
Posted

for guys running on OS5 and having the module installed, just edit the file /raid/data/module/cfg/module.rc/EmbyServer.rc

Find this line

 

$APP_DIR/bin/emby-server &

and change it to

 

$APP_DIR/bin/emby-server > /dev/null 2>&1 &

For Emby developers, add this change in the module.rc script, to fix the hanging issue on OS5

  • Like 1
Posted

I'm not sure what the solution of @@outkastm means. Does it solve the hanging problem of @@throgmorton but not the 'not installing problem' I (and @meszimark) have ?

Posted

I see you have a NAS using x86 architecture. Official Emby package is not available for this platform.This fix is for 64bit OS5 platform

Posted

Just a heads up, I've removed the link from the first post and going forward you can find this package from the download page of our website:

 

https://emby.media/download

 

It's under the NAS section, then select Thecus.

 

Thanks guys.

 

The links for the 64bit software are valid, but the Emby app does not appear in the integrated appstore under Thecus OS7 nor does it appear in the Thecus online webstore. Additionally the instructions mention that manual download by PC is required for OS5 & 6, but no download links are supplied - I am searching for the most recent ARM version of Emby for my N2350 - any chance the new release will support me? many thanks!!

Posted

We don't currently have an arm package but it's possible for the future. Thanks.

  • 2 weeks later...
Posted

@@outkastm this change will be in our next release as well as beta update. thanks.

  • 2 weeks later...
blakestone
Posted (edited)

Thecus N7510 (v2.06.02.10) OS5 64bit

Hello,
I am trying to install Emby for the first time and need some help.
I have downloaded the file and it say that OS5 requires dependencies which I have found on the Thecus App page but only older versions of these files:

- Required: Mono v4.4.0.0 || Thecus App: Mono v3.4.0.0
- Required: ffmpeg v3.1.1.0 || Thecus App: ffmpeg v2.2.1

Does anyone know where I can obtain the required versions of these dependencies?

 

Edit: found it here: https://emby.media/community/index.php?/topic/48824-327000-download/?p=464000 :)

Edited by blakestone
Posted

Thecus N7510 (v2.06.02.10) OS5 64bit

 

Hello,

I am trying to install Emby for the first time and need some help.

I have downloaded the file and it say that OS5 requires dependencies which I have found on the Thecus App page but only older versions of these files:

 

- Required: Mono v4.4.0.0 || Thecus App: Mono v3.4.0.0

- Required: ffmpeg v3.1.1.0 || Thecus App: ffmpeg v2.2.1

 

Does anyone know where I can obtain the required versions of these dependencies?

 

Edit: found it here: https://emby.media/community/index.php?/topic/48824-327000-download/?p=464000 :)

 

Since you have a 64-bit model, it sounds like you can just use the install process listed on our website rather than going through all that:

https://emby.media/nas-server.html

blakestone
Posted (edited)

This link says you need OS7 in order to do that, OS5 and OS6 require those dependencies?

 

Also I ran into the same bug where clicking START in the Thecus Apps page does not show the application running - however it is running.

Also the first film I tried the Video and Audio was out of sync by 2-3 seconds.

Also out of about 800+ films I have it only downloaded 8 covers - I click refresh metadata and it says refreshing but nothing ever happens?

Edit: I am using this with a  Emby app on a "ROKU Streaming Stick Plus" - https://www.roku.com/products/streaming-stick-plus

Edited by blakestone
Posted

Did you install the package from our website?

  • 1 year later...
Posted

Is there an ARM7 build available for Thecus N2350 NAS? 

Posted
On 7/15/2020 at 1:21 PM, Kanishka said:

Is there an ARM7 build available for Thecus N2350 NAS? 

No but we'll investigate. 

Posted
On 7/15/2020 at 1:21 PM, Kanishka said:

Is there an ARM7 build available for Thecus N2350 NAS? 

@Kanishka , yes, we've added armv7 to our downloads page:

https://emby.media/download

Please try it out. Thanks !

  • 1 year later...
Laurentiu2
Posted

Sorry to revive this old topic, but since we're talking thecus, any news on supporting N2560 OS6 X86?  Thanks for the great work you are doing

Posted
38 minutes ago, Laurentiu2 said:

Sorry to revive this old topic, but since we're talking thecus, any news on supporting N2560 OS6 X86?  Thanks for the great work you are doing

That's a 32 bit model?

Laurentiu2
Posted
1 hour ago, Luke said:

That's a 32 bit model?

Yes Luke, it's 32bit. Any chance for an update?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...