xXSagaiaXx 24 Posted December 5, 2016 Author Share Posted December 5, 2016 I am setting up now. Will report back with results. Link to comment Share on other sites More sharing options...
Luke 37272 Posted December 7, 2016 Share Posted December 7, 2016 Any news? Thanks ! Link to comment Share on other sites More sharing options...
xXSagaiaXx 24 Posted January 10, 2017 Author Share Posted January 10, 2017 Any news? Thanks ! Sorry Luke I haven't had time to test in a controlled setting. I will this weekend. It is discouraging trying to figure out cause it seems like it's only my issue and no one else is having, so that makes me think it's something with my server. I tried today watching a movie from my phone from a remote location and got the same result with the not resuming.This proves that it's not ATV. I thought perhaps I didnt have permissions set properly within windows so nothing had write access. I enabled but still having problem. Link to comment Share on other sites More sharing options...
xXSagaiaXx 24 Posted January 24, 2017 Author Share Posted January 24, 2017 I had a server crash so I had to reinstall windows and setup emby from scratch. I have tried a couple of movies so far and still having the no resume issue about 50% of the time. I have came to a some conclusions: 1. It's not the codec cause I'm getting this with .mkv and .mp4 2. I find that it seems to be happening half way through playing 3. It's not just ATV, android client and I tried with web client and had the no resume happen there as well 4. It's not the harddrive cause right before server crash I had put movies on a newer, bigger drive 5. I'm beginning to think it's something with my hardware or network setup @@ebr how does emby store the resume state of media, and where is the location so I can monitor. Link to comment Share on other sites More sharing options...
Luke 37272 Posted January 24, 2017 Share Posted January 24, 2017 can you show a screenshot of your nfo metadata settings from the server dashboard? thanks ! Link to comment Share on other sites More sharing options...
xXSagaiaXx 24 Posted January 24, 2017 Author Share Posted January 24, 2017 Here you go. Where are the files stored? Untitled.zip Link to comment Share on other sites More sharing options...
Luke 37272 Posted January 24, 2017 Share Posted January 24, 2017 You've enabled syncing user data to nfo's, so most likely another program is altering the saved data. try turning that off. Link to comment Share on other sites More sharing options...
xXSagaiaXx 24 Posted January 24, 2017 Author Share Posted January 24, 2017 where is the resume state stored? Link to comment Share on other sites More sharing options...
Luke 37272 Posted January 24, 2017 Share Posted January 24, 2017 In the database. Link to comment Share on other sites More sharing options...
xXSagaiaXx 24 Posted January 24, 2017 Author Share Posted January 24, 2017 so I unchecked what you had suggested and still didnt work. for example I played Dealpool and would resume fine but when I got to around the 1 hour and 9 minute mark it wouldnt save the resume point no matter how many times I tried. here's my log. server-63620804762.zip Link to comment Share on other sites More sharing options...
xXSagaiaXx 24 Posted January 24, 2017 Author Share Posted January 24, 2017 In the database. Where at on the C drive would it be located Link to comment Share on other sites More sharing options...
ebr 14960 Posted January 24, 2017 Share Posted January 24, 2017 The data is not anywhere you can easily see it. What is the reported length of the item you were last trying? Can you show the media info for it from the web client? Also, what are your resume settings under Dashboard->Playback->Resume Settings? Link to comment Share on other sites More sharing options...
Luke 37272 Posted January 24, 2017 Share Posted January 24, 2017 yea and actually, since you enabled nfo syncing, for that user the nfo files will be the primary source. Link to comment Share on other sites More sharing options...
xXSagaiaXx 24 Posted January 24, 2017 Author Share Posted January 24, 2017 yea and actually, since you enabled nfo syncing, for that user the nfo files will be the primary source. I disabled nfo syncing as you had suggested earlier Link to comment Share on other sites More sharing options...
xXSagaiaXx 24 Posted January 24, 2017 Author Share Posted January 24, 2017 The data is not anywhere you can easily see it. What is the reported length of the item you were last trying? Can you show the media info for it from the web client? Also, what are your resume settings under Dashboard->Playback->Resume Settings? Attached screenshots for your questions Link to comment Share on other sites More sharing options...
Luke 37272 Posted January 24, 2017 Share Posted January 24, 2017 Can you show another screenshot of the nfo settings? thanks. Link to comment Share on other sites More sharing options...
ebr 14960 Posted January 24, 2017 Share Posted January 24, 2017 And the media info at the bottom of that page you posted... Link to comment Share on other sites More sharing options...
xXSagaiaXx 24 Posted January 24, 2017 Author Share Posted January 24, 2017 Can you show another screenshot of the nfo settings? thanks. Link to comment Share on other sites More sharing options...
xXSagaiaXx 24 Posted January 24, 2017 Author Share Posted January 24, 2017 And the media info at the bottom of that page you posted... Link to comment Share on other sites More sharing options...
Luke 37272 Posted January 24, 2017 Share Posted January 24, 2017 OK so try to play something, stop in the middle, and see what happens. Thanks. Link to comment Share on other sites More sharing options...
xXSagaiaXx 24 Posted January 24, 2017 Author Share Posted January 24, 2017 OK so try to play something, stop in the middle, and see what happens. Thanks. I've tried 4 different movies, all of either mkv or mp4 and at diffferent time and all have resumed fine. I haven't changed any settings. Like I've said in the past this seems to happen at random times. As soon as it happens I'll post another log. Link to comment Share on other sites More sharing options...
Luke 37272 Posted January 24, 2017 Share Posted January 24, 2017 Well done. Link to comment Share on other sites More sharing options...
xXSagaiaXx 24 Posted February 7, 2017 Author Share Posted February 7, 2017 (edited) I was going to start a test folder within the current stable build of emby. I updated to the latest stable 3.2. I have noticed now that the resume point is being retained and is working fine. I originally thought the movies that the media that I was encoding to 1920x1080 was having the resume issue because the media that I encoded to 1280x720 didnt seem to have resume issues. Media that was encoded by someone else be it 1920x1080 or 1280x720 seemed to resume fine. I will report back if I start having the resume issues again. Edited February 8, 2017 by xXSagaiaXx Link to comment Share on other sites More sharing options...
xXSagaiaXx 24 Posted February 8, 2017 Author Share Posted February 8, 2017 (edited) Nope @@ebr, Just happened again. I was testing this movie when I sent the above post. I tried playing the Princess Bride multiple times from different spots and it would show a resume point, I exited out of emby on android tv and go back in and it would show up on resume. I played 3 episodes of How I Met Your Mother and noticed The Princess Bride was no longer showing up to resume. I tried playing The Princess Bride where I last left off and played for 2 min and backed out to the info page and showed a resume point. backed out to emby home screen and it wasnt showing up. Sent a log from android tv, user is "Home". Same result in web client as well. server-63622083686.zip Edited February 8, 2017 by xXSagaiaXx Link to comment Share on other sites More sharing options...
Luke 37272 Posted February 8, 2017 Share Posted February 8, 2017 Well the android tv app reported the end time to the server 2017-02-07 21:52:03.6798 Info SessionManager: Playback stopped reported by app AndroidTv 1.3.19g playing The Princess Bride. Stopped at 4676650 ms Maybe the app just didn't refresh the home screen? what happens if you close the app and come back in? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now