Luke 37099 Posted September 7, 2020 Author Share Posted September 7, 2020 On 8/30/2020 at 10:24 PM, Risiamu said: # arxher @ arxher-desktop in ~ [10:20:06] $ sudo systemctl status emby-server ● emby-server.service - Emby Server is a personal media server with apps on just about every device. Loaded: loaded (/usr/lib/systemd/system/emby-server.service; enabled; vendor preset: enabled) Active: failed (Result: signal) since Mon 2020-08-31 10:19:16 CST; 57s ago Main PID: 18714 (code=killed, signal=ABRT) 8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Starting entry point Emby.Server.Implementations.EntryPoints.StartupWizard 8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Entry point completed: Emby.Server.Implementations.EntryPoints.StartupWizard. Duration: 8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Starting entry point Emby.Server.Implementations.EntryPoints.SystemEvents 8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Entry point completed: Emby.Server.Implementations.EntryPoints.SystemEvents. Duration: 8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Starting entry point Emby.Server.Implementations.EntryPoints.UserDataChangeNotifier 8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Entry point completed: Emby.Server.Implementations.EntryPoints.UserDataChangeNotifier. 8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Starting entry point Emby.Server.Implementations.Channels.ChannelsEntryPoint 8月 31 10:19:16 arxher-desktop emby-server[18714]: Stack overflow. 8月 31 10:19:16 arxher-desktop systemd[1]: emby-server.service: Main process exited, code=killed, status=6/ABRT 8月 31 10:19:16 arxher-desktop systemd[1]: emby-server.service: Failed with result 'signal'. ...skipping... ● emby-server.service - Emby Server is a personal media server with apps on just about every device. Loaded: loaded (/usr/lib/systemd/system/emby-server.service; enabled; vendor preset: enabled) Active: failed (Result: signal) since Mon 2020-08-31 10:19:16 CST; 57s ago Main PID: 18714 (code=killed, signal=ABRT) 8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Starting entry point Emby.Server.Implementations.EntryPoints.StartupWizard 8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Entry point completed: Emby.Server.Implementations.EntryPoints.StartupWizard. Duration: 8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Starting entry point Emby.Server.Implementations.EntryPoints.SystemEvents 8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Entry point completed: Emby.Server.Implementations.EntryPoints.SystemEvents. Duration: 8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Starting entry point Emby.Server.Implementations.EntryPoints.UserDataChangeNotifier 8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Entry point completed: Emby.Server.Implementations.EntryPoints.UserDataChangeNotifier. 8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Starting entry point Emby.Server.Implementations.Channels.ChannelsEntryPoint 8月 31 10:19:16 arxher-desktop emby-server[18714]: Stack overflow. 8月 31 10:19:16 arxher-desktop systemd[1]: emby-server.service: Main process exited, code=killed, status=6/ABRT 8月 31 10:19:16 arxher-desktop systemd[1]: emby-server.service: Failed with result 'signal'. Meeting some stackoverflow problem. I am running this on Jetson Nano (ARMV8) Ubuntu 18. It initialy works fine, but then i can't start it.... @Risiamu can you please try the beta server and see if this helps? Thanks. Link to comment Share on other sites More sharing options...
ysadiq 1 Posted February 8, 2021 Share Posted February 8, 2021 hello, please i need support configuring permissions for emby on my ubuntu machine. i just installed on ubuntu 20, i have my media files on a second harddrive on the same machine, but i can't seem to access my files on drive from emby. i won't mind a remote connection to help me fix this issue. not really good with linux. Link to comment Share on other sites More sharing options...
weble 14 Posted February 8, 2021 Share Posted February 8, 2021 54 minutes ago, ysadiq said: hello, please i need support configuring permissions for emby on my ubuntu machine. i just installed on ubuntu 20, i have my media files on a second harddrive on the same machine, but i can't seem to access my files on drive from emby. i won't mind a remote connection to help me fix this issue. not really good with linux. Take a look at this post Basically using Linux access control lists you can add the user to a specific folder. Its easy to do right from the command line something like this, setfacl -m user:emby:rwx /mnt/media this means your setting the user emby to read write and execute in all files and subfolders of /mnt/media Note: /mnt/media is where my external drive is If you dont want emby to have write access then use, setfacl -m user:emby:rx /mnt/media Should get you up and running Link to comment Share on other sites More sharing options...
ysadiq 1 Posted February 9, 2021 Share Posted February 9, 2021 3 hours ago, weble said: Take a look at this post Basically using Linux access control lists you can add the user to a specific folder. Its easy to do right from the command line something like this, setfacl -m user:emby:rwx /mnt/media this means your setting the user emby to read write and execute in all files and subfolders of /mnt/media Note: /mnt/media is where my external drive is If you dont want emby to have write access then use, setfacl -m user:emby:rx /mnt/media Should get you up and running WOWWWWWWWW thank you very much....it worked 1 Link to comment Share on other sites More sharing options...
katinatez 0 Posted June 13, 2022 Share Posted June 13, 2022 Hello, need to know default location of transcoding logs in Ubuntu 22.04. I created a VM with Ubuntu, passed GPU pass through for transcoding, played a movie to test and my VM ran out of HDD space. I need to go and delete log files. Thanks Link to comment Share on other sites More sharing options...
rotational467 31 Posted June 13, 2022 Share Posted June 13, 2022 17 hours ago, katinatez said: Hello, need to know default location of transcoding logs in Ubuntu 22.04. I created a VM with Ubuntu, passed GPU pass through for transcoding, played a movie to test and my VM ran out of HDD space. I need to go and delete log files. Thanks On 20.04 it's here, I'd be surprised if it's moved: /var/lib/emby/logs Link to comment Share on other sites More sharing options...
sfatula 185 Posted June 13, 2022 Share Posted June 13, 2022 You can always see where via Emby. Go to "Manage Emby Server", and right there on the dashboard on the right it shows the log file paths. 1 1 Link to comment Share on other sites More sharing options...
katinatez 0 Posted June 22, 2022 Share Posted June 22, 2022 On 6/13/2022 at 11:10 AM, sfatula said: You can always see where via Emby. Go to "Manage Emby Server", and right there on the dashboard on the right it shows the log file paths. Thank You found it Link to comment Share on other sites More sharing options...
gumbercules 0 Posted September 24, 2022 Share Posted September 24, 2022 I have searched all over and cannot figure out what I'm doing wrong with my permissions on my media folder (exfat.) I have added emby to my main user group and recursively set all folder/file permission to 755. If I switch to the emby user I am unable to read or write in my media folder. Does anyone have an idea of what I'm doing wrong here? media drive permissions: drwxr-xr-x 8 huff huff 131072 Sep 24 18:15 samsung emby group id: emby : emby video render huff trying to create a test file as the emby user in the media folder: huff@meerkat:$ cd /media/huff/samsung/ huff@meerkat:/media/huff/samsung$ sudo -u emby bash emby@meerkat:/media/huff/samsung$ touch test touch: cannot touch 'test': Permission denied mount options in fstab LABEL=samsung /media/huff/samsung exfat rw,defaults,uid=1000,gid=1000, 0 0 Link to comment Share on other sites More sharing options...
weble 14 Posted September 24, 2022 Share Posted September 24, 2022 (edited) @gumberculesyour mounting the drive with user and group of 1000 (which would be your user you setup linux with usually) then you set the file / folder permissions to 755. This means that your uid 1000 can write to the folder but group 1000 / others can only read or execute files. you may want to change it to 766 for the group / others to have read + write permissions. Edited September 24, 2022 by weble 1 Link to comment Share on other sites More sharing options...
gumbercules 0 Posted September 24, 2022 Share Posted September 24, 2022 34 minutes ago, weble said: @gumberculesyour mounting the drive with user and group of 1000 (which would be your user you setup linux with usually) then you set the file / folder permissions to 755. This means that your uid 1000 can write to the folder but group 1000 / others can only read or execute files. you may want to change it to 766 for the group / others to have read + write permissions. @weble I appreciate your help! I ran chmod -R 766 on /media/huff/samsung but still don't see any folders after /media/huff when trying to add the library in the emby setup wizard. I also tried to write a test file as user emby in the samsung folder but it was denied on permissions. Any other ideas? Link to comment Share on other sites More sharing options...
Luke 37099 Posted September 25, 2022 Author Share Posted September 25, 2022 4 hours ago, gumbercules said: @weble I appreciate your help! I ran chmod -R 766 on /media/huff/samsung but still don't see any folders after /media/huff when trying to add the library in the emby setup wizard. I also tried to write a test file as user emby in the samsung folder but it was denied on permissions. Any other ideas? Hi, have you taken a look at this? Link to comment Share on other sites More sharing options...
tedfroop 33 Posted March 19, 2023 Share Posted March 19, 2023 On 24/09/2022 at 17:58, gumbercules said: @weble I appreciate your help! I ran chmod -R 766 on /media/huff/samsung but still don't see any folders after /media/huff when trying to add the library in the emby setup wizard. I also tried to write a test file as user emby in the samsung folder but it was denied on permissions. Any other ideas? Did you run the command with sudo? Sudo is "act like root". If root has permissions to folders they won't change without running the command as root..... Same command but sudo chmod -R 766...... Link to comment Share on other sites More sharing options...
GwyllGwyllin 0 Posted March 27, 2023 Share Posted March 27, 2023 On 3/19/2023 at 5:23 AM, tedfroop said: Did you run the command with sudo? Sudo is "act like root". If root has permissions to folders they won't change without running the command as root..... Same command but sudo chmod -R 766...... Hello, I suggest to use 775 as directory permissions and 664 for files ... or a bit more securely 770 for directories and 660 for files. The permission 766 isn't good for directories. With the given username, group name and path above: sudo chown huff:huff -R /media/huff/samsung sudo find /media/huff/samsung -type d -exec chmod 2770 {} \; sudo find /media/huff/samsung -type f -exec chmod 660 {} \; In case of the emby user doesn't need write permission on the media files so you can try 640 in step 3. To avoid future permission problems I think you should add umask to both huff and emby user's profile. The ~/.bashrc usualy a good place for this. umask 007 will do. Link to comment Share on other sites More sharing options...
EODCrafter 180 Posted April 14 Share Posted April 14 I didn't have to add paths when I update.....js. They just carried over. Link to comment Share on other sites More sharing options...
zackwihak 0 Posted April 19 Share Posted April 19 I'm noticing there is no Ubuntu X64 4.8.4.0 release. Was this missed by mistake? Link to comment Share on other sites More sharing options...
Happy2Play 8296 Posted April 19 Share Posted April 19 56 minutes ago, zackwihak said: I'm noticing there is no Ubuntu X64 4.8.4.0 release. Was this missed by mistake? Can only guess the build server hung or is having issues as other Linux platforms have issues with the update (libOpenCL). Link to comment Share on other sites More sharing options...
Luke 37099 Posted April 19 Author Share Posted April 19 Hi, it should be up any minute now. Thanks. Link to comment Share on other sites More sharing options...
PaulE123 18 Posted April 19 Share Posted April 19 1 hour ago, Happy2Play said: Can only guess the build server hung or is having issues as other Linux platforms have issues with the update (libOpenCL). Maybe yeah. My Emby client is mentioning an available update (4.8.4) but the docker is sitting at 4.8.3 saying it's up to date (Unraid), haven't seen that before. Link to comment Share on other sites More sharing options...
Luke 37099 Posted April 19 Author Share Posted April 19 3 minutes ago, PaulE123 said: Maybe yeah. My Emby client is mentioning an available update (4.8.4) but the docker is sitting at 4.8.3 saying it's up to date (Unraid), haven't seen that before. HI, the check for an update is only once per day, so the next time it does that, then it will become aware that an update is available and display that information. Link to comment Share on other sites More sharing options...
PaulE123 18 Posted April 19 Share Posted April 19 5 minutes ago, Luke said: HI, the check for an update is only once per day, so the next time it does that, then it will become aware that an update is available and display that information. Cheers Luke, I'm not sure I fully understand though. The Emby client is obviously able to read the 4.8.4 tag, and I'm able to manually ask the dockers to check for available updates too, but the Emby docker is saying it's up to date at 4.8.3 - do you mean the location that the docker check pings is reporting 4.8.3 as the latest, and it'll likely update that tomorrow or so? Link to comment Share on other sites More sharing options...
Luke 37099 Posted April 19 Author Share Posted April 19 3 minutes ago, PaulE123 said: Cheers Luke, I'm not sure I fully understand though. The Emby client is obviously able to read the 4.8.4 tag, and I'm able to manually ask the dockers to check for available updates too, but the Emby docker is saying it's up to date at 4.8.3 - do you mean the location that the docker check pings is reporting 4.8.3 as the latest, and it'll likely update that tomorrow or so? It's the server that checks if an update is available, and it does this periodically in the background, not on demand every single time you open up the server dashboard. That's why an update might be available in Docker for a few hours even if your server dashboard doesn't' show it yet. Link to comment Share on other sites More sharing options...
PaulE123 18 Posted April 19 Share Posted April 19 54 minutes ago, Luke said: It's the server that checks if an update is available, and it does this periodically in the background, not on demand every single time you open up the server dashboard. That's why an update might be available in Docker for a few hours even if your server dashboard doesn't' show it yet. Sorry Luke, I'm still not following you. When you say it's the server that checks if an update is available, you're referring to my own personal server yes? If so, I can log into my Unraid server, and manually check if any docker updates are available....and that's currently showing as no, all dockers are up to date (even though my emby server docker is on 4.8.3). I can then open an Emby client, say on my phone for example, and view the by dashboard....that says that 4.8.4 is available and that I should install it. Link to comment Share on other sites More sharing options...
Luke 37099 Posted April 19 Author Share Posted April 19 2 minutes ago, PaulE123 said: Sorry Luke, I'm still not following you. When you say it's the server that checks if an update is available, you're referring to my own personal server yes? If so, I can log into my Unraid server, and manually check if any docker updates are available....and that's currently showing as no, all dockers are up to date (even though my emby server docker is on 4.8.3). I can then open an Emby client, say on my phone for example, and view the by dashboard....that says that 4.8.4 is available and that I should install it. Right OK. that's just because the check isn't docker-specific. For most platforms the update check is platform-specific, just not Docker. So that means there could be a small gap of a few hours of when it says an update is available until it actually is. 1 Link to comment Share on other sites More sharing options...
PaulE123 18 Posted April 19 Share Posted April 19 (edited) 2 minutes ago, Luke said: Right OK. that's just because the check isn't docker-specific. For most platforms the update check is platform-specific, just not Docker. So that means there could be a small gap of a few hours of when it says an update is available until it actually is. Grand, I'll come back to it tomorrow. I see anyway there's going to be a 4.8.5 so I can wait. Thanks Luke Edited April 19 by PaulE123 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now