EmbyServer core dumping on DS414

[WouterC 0]

I first tried to upgrade the installed package 4.4.3.0-1. The upgrade finished but emby server doesn't start. 

I uninstalled emby server and the result was that all my settings were gone. I didn't take a backup. Damn me. 

Anyway, if I try to install 4.5.1.0 directly, I get an error that port 8096 was in use. The same error with version 4.6.0.1. 

I had to install 4.4.3.0-1 again from the synology repository and afterwards I can upgrade. However Emby doesn't start, even it is a clean install. Nothing configured yet. 

/var/log messages shows:

2020-10-03T14:38:29+02:00 DiskStation coredump: Process EmbyServer[25271] dumped core on signal [4].
2020-10-03T14:42:06+02:00 DiskStation coredump: Process EmbyServer[31128] dumped core on signal [4].
2020-10-03T14:44:38+02:00 DiskStation coredump: Process EmbyServer[2890] dumped core on signal [4].
 

All messages in embyserver.txt are from 4.4.3.0-1, nothing from 4.5.1.0.

I rebooted the NAS al several times. I even tried already to set the permissions like described in these forums. 

info:

Linux DiskStation 3.2.40 #25426 SMP Wed Jul 8 03:14:12 CST 2020 armv7l GNU/Linux synology_armadaxp_ds414
majorversion="6"
minorversion="2"
productversion="6.2.3"
buildphase="GM"
buildnumber="25426"
smallfixnumber="2"
builddate="2020/07/08"
buildtime="06:13:16"
 

Any idea how I can solve this one? or collect more info? 

[Luke 42077]

HI, what install package did you use?

[WouterC 0]

https://emby.media/nas-server.html

 emby-server-synology_4.5.1.0_armv7.spk

( I tried also the beta package: emby-server-synology_4.6.0.1_armv7.spk )

[redlabs 1]

Hi,

i have the same problem. Emby wont start at 414 with 4.5.1.0. It stats for 5 seconds and then it stops.

[na876 0]

I have the same problem on a DS214+. Installed emby-server-synology_4.5.1.0_armv7.spk it just stops after a few moments. There's also nothing in the logfile. When trying to start it using a SSH session I get:

admin@DiskStation:/volume1/@appstore/EmbyServer/bin$ ./emby-server
Illegal instruction (core dumped)
admin@DiskStation:/volume1/@appstore/EmbyServer/bin$
 

[redlabs 1]

Hi,

4.5.2.0 doesn't solve the problem. After update Emby starts for a few seconds and then it stops again.

Has anyone tested the beta release?

Edited October 8, 2020 by redlabs
Edith

[Luke 42077]

2 hours ago, redlabs said:

Hi,

4.5.2.0 doesn't solve the problem. After update Emby starts for a few seconds and then it stops again.

Has anyone tested the beta release?

Hi, yes but we don't have every single Synology model on hand for testing. We're looking into this. Thanks for reporting.

[WouterC 0]

@Luke: if you have a package with debugging enabled, I can install and test it.
With the uninstalling and installing all my previous settings are gone and I have to start over again. 

[Luke 42077]

Thanks for the offer. Right now we have an idea of what we think the problem is. We need to split the armv7 package into two variations depending on models. We should have a package up soon. Thanks.

[Luke 42077]

Can you please try this build:

https://github.com/MediaBrowser/Emby.Releases/releases/download/4.6.0.2/emby-server-synology_4.6.0.2_armv7_legacy.spk

Thanks.

[redlabs 1]

 

Thanks for the version. The problem is not resolved. The Emby Server starts for a few seconds and stopps. Sry

[WouterC 0]

Indeed, it's still core dumping. Nothing appears in the Emby log files.

Only in /var/log/messages: 

2020-10-10T21:53:51+02:00 DiskStation synouser: user_set.c:234 pUser->szName[emby] is EXIST.
2020-10-10T21:53:52+02:00 DiskStation synoscgi_SYNO.Core.Package.Installation_1_install[11952]: resource_api.cpp:289 Release service-cfg for EmbyServer when 0x0002 (done)
2020-10-10T21:53:56+02:00 DiskStation synoscgi_SYNO.Core.Package.Installation_1_install[12272]: resource_api.cpp:190 Acquire service-cfg for EmbyServer when 0x0002 (done)
2020-10-10T21:54:12+02:00 DiskStation coredump: Process EmbyServer[13816] dumped core on signal [4].
 

Additional remark: I had to install first version 4.4.3.0 from the Synology repository and upgrade afterwards to 4.6.0.2.

If I install 4.6.0.2 directly, I get the error that port 8096 is in use. (See: 

Reboot did solve the problem. 

[Luke 42077]

@WouterC when you say reboot solved the problem, do you mean to say you're able to start the server now?

[redlabs 1]

For me, a reboot don‘t solve the problem.

 

[WouterC 0]

@Luke Sorry for the confusion but the reboot did NOT solve it. It was already late (and a long day) when I typed the message.

[Luke 42077]

If you're on armv7 and still having an issue, can you please try the latest beta package for your NAS?

https://emby.media/download

The instructions have been updated and there are two armv7 packages now, so please make sure to get the right one for your device. Thanks.

[WouterC 0]

@Luke Is it possible that there is a mix up of the armv7 packages?

The first armv7 points to: https://github.com/MediaBrowser/Emby.Releases/releases/download/4.6.0.2/emby-server-synology_4.6.0.2_armv7.spk

The second armv7 package points to: https://github.com/MediaBrowser/Emby.Releases/releases/download/4.5.2.0/emby-server-synology_4.5.2.0_armv7_legacy.spk

That is version 4.5.2.0 (the stable one).

 

I went to https://github.com/MediaBrowser/Emby.Releases/releases/ and downloaded https://github.com/MediaBrowser/Emby.Releases/releases/download/4.6.0.2/emby-server-synology-mono_4.6.0.2_armv7_legacy.spk

Core dumped again: 2020-10-11T17:57:30+02:00 DiskStation coredump: Process mono[9797] dumped core on signal [6].

Still nothing in the Emby log files.

Tried also: https://github.com/MediaBrowser/Emby.Releases/releases/download/4.6.0.2/emby-server-synology_4.6.0.2_armv7.spk but this one is not supported on my platform. 

 

 

 

Edited October 11, 2020 by WouterC

[Luke 42077]

Yea that needs to be updated. In the meantime, can you please try this:

https://github.com/MediaBrowser/Emby.Releases/releases/download/4.6.0.2/emby-server-synology-mono_4.6.0.2_armv7_legacy.spk

Thanks.

[WouterC 0]

@Luke Still coredumping

2020-10-11T21:34:26+02:00 DiskStation coredump: Process mono[25109] dumped core on signal [6].
2020-10-11T21:34:31+02:00 DiskStation synopkg: pkgtool.cpp:3125 Package EmbyServer stops but service pkgctl-EmbyServer start
2020-10-11T21:34:54+02:00 DiskStation synoscgi_SYNO.Core.Package_2_list[26568]: list.cpp:330 SYNO.Core.Package.list rollback to direct call
2020-10-11T21:38:24+02:00 DiskStation coredump: Process mono[31524] dumped core on signal [6].
2020-10-11T21:38:33+02:00 DiskStation synoscgi_SYNO.Core.Package_2_list[31849]: list.cpp:330 SYNO.Core.Package.list rollback to direct call

And nothing in the logfiles:

root@DiskStation:/volume1/Emby/logs# ls -ltr
total 184
-rw-r--r-- 1 emby users    540 Oct  3 14:31 certsync.log
-rw-r--r-- 1 emby users     92 Oct  3 14:31 drmsetup.log
-rw-r--r-- 1 emby users     88 Oct  3 14:31 embysvr.stderr
-rw-r--r-- 1 emby users  15507 Oct  3 14:31 embysvr.stdout
-rw-r--r-- 1 emby users  25127 Oct  3 14:31 embyserver.txt
-rw-r--r-- 1 emby users 105147 Oct  3 14:31 hardware_detection-63737332300.txt
-rw-r--r-- 1 emby users   2054 Oct  3 14:32 ESdaemon.log
-rw-r--r-- 1 emby users  16241 Oct  3 14:35 start-stop-status_20201003.log
 

It's now October 11th.  

[redlabs 1]

i'm currently not able to update/test

[Luke 42077]

4 minutes ago, redlabs said:

i'm currently not able to update/test

What package did you try to install?

[redlabs 1]

15 hours ago, Luke said:

If you're on armv7 and still having an issue, can you please try the latest beta package for your NAS?

https://emby.media/download

The instructions have been updated and there are two armv7 packages now, so please make sure to get the right one for your device. Thanks.

This Beta. It‘s 4.5.2.0.

 

I habe this installed 

On 10/10/2020 at 9:09 PM, Luke said:

Can you please try this build:

https://github.com/MediaBrowser/Emby.Releases/releases/download/4.6.0.2/emby-server-synology_4.6.0.2_armv7_legacy.spk

Thanks.

Is this the Same like this?

11 hours ago, Luke said:

Yea that needs to be updated. In the meantime, can you please try this:

https://github.com/MediaBrowser/Emby.Releases/releases/download/4.6.0.2/emby-server-synology-mono_4.6.0.2_armv7_legacy.spk

Thanks.

Edit:

With https://github.com/MediaBrowser/Emby.Releases/releases/download/4.6.0.2/emby-server-synology-mono_4.6.0.2_armv7_legacy.spk the same like @WouterC

Edited October 12, 2020 by redlabs

[redlabs 1]

Is there a solution in progress?

 

Is it possible to return to an older version? It's stupid when the media server doesn't work.

[Luke 42077]

We are looking into it. Are you willing to provide SSH access to your NAS so that we can test directly on it? This will help us resolve the issue faster. If you're willing to do this, please send me a PM. Thanks !

[WouterC 0]

@Luke I'm checking how I can limit the ssh access to only your account. The firewall is on the modem of my internet provider and it's very limited. I can only open/close ports.