Degsy41 0 Posted March 5, 2018 Posted March 5, 2018 Hi, I have followed the directions in the tutorial https://emby.media/nas-server.html under Synology to download Emby but it does not pick up any package. adding the location in to a browser shows only: Repository Online! 79.69.160.138 Is there something I am not getting here? Is there something else I need to do? thanks Degsy
evlsmurf 0 Posted March 5, 2018 Posted March 5, 2018 repo is working now but emby server says whats below but synology doesn't have emby update and i can't seam to find it on github for manual update Version 3.3.0.0 A new version of Emby Server is available! Version 3.3.1.0 is now available for download. Please login to DSM and go to Package Center to update.
solabc16 379 Posted March 5, 2018 Posted March 5, 2018 Hello @@evlsmurf The Synology/XPEnology releases will typically be available within 24 hours, it's there now - have a look around at other posts for more info/background. Best - James
DarWun 349 Posted March 6, 2018 Posted March 6, 2018 (edited) Hello @@evlsmurf The Synology/XPEnology releases will typically be available within 24 hours, it's there now - have a look around at other posts for more info/background. Best - James Version 3.3.0.1-1 beta is the latest version being offered through DSM on my Synology DS414 as of several minutes ago. Has version 3.3.1.0 gone live for all Synology platforms? Edited March 6, 2018 by DarWun
mutu310 70 Posted March 6, 2018 Posted March 6, 2018 Hello @@evlsmurf The Synology/XPEnology releases will typically be available within 24 hours, it's there now - have a look around at other posts for more info/background. Best - James H-h-how? https://synology.emby.media has been down for me for over 24 hours. It's not just me, I tested from https://www.uptrends.com/tools/uptime as well. As a result, I can't update to 3.3.1.0.
mutu310 70 Posted March 6, 2018 Posted March 6, 2018 Yep, it was back up about an hour after my last post here.
solabc16 379 Posted March 6, 2018 Posted March 6, 2018 (edited) Hello @@DarWun, All If you haven't already seen, the update is now available on the beta channel. We don't normally have stable releases so close together, and we were in the process of re-tooling the beta channel; hence the delay. With regard to the occasional issues with access to 'synology.emby.media' over the last couple of weeks, there's a couple of things in play. So, as an FYI, they are... Loss of performance due to Spectre/Meltdown The success of the project(!) Sporadic denial of service attacks. ...we've got a pretty good handle on them now, so expect the normal levels of stability to return now; but will continue to keep a close eye on it. Appreciate your feedback and do feel free to keep posting any queries here. Best - James Edited March 6, 2018 by solabc16
DarWun 349 Posted March 6, 2018 Posted March 6, 2018 (edited) Best - James Thanks @@solabc16. FYI The update showed up when I booted up the server tonight. Normally I wouldn't ask as I realize there is time required on your end to vet the releases before migrating them to the NAS platforms. But I thought the fact that I wasn't seeing the update being offered might be related to updates no longer showing up on the emby dashboard on account of mono TLS 1.2 quirks. I should have realized that the DoS attacks on GitHub might be a factor. Anyway, once again all the effort keeping the synology version of Emby alive is greatly appreciated. Edited March 6, 2018 by DarWun
marcelp54 0 Posted July 2, 2018 Posted July 2, 2018 Hi, I have followed the directions in the tutorial https://emby.media/nas-server.html under Synology to download Emby but it does not pick up any package. Is there something I am not getting here? Is there something else I need to do? Thanks
Luke 42077 Posted July 2, 2018 Posted July 2, 2018 Hi, I have followed the directions in the tutorial https://emby.media/nas-server.html under Synology to download Emby but it does not pick up any package. Is there something I am not getting here? Is there something else I need to do? Thanks Hi, what model Synology do you have?
solabc16 379 Posted July 2, 2018 Posted July 2, 2018 Hello @@marcelp54 As mentioned by Luke, please post your Synology model and DSM version here, then PM me your current IP addresss and I can do some digging. There are issues with the latest DSM 6.2 we've been working around, so this could be a factor here. Best - James
marcelp54 0 Posted July 2, 2018 Posted July 2, 2018 Sorry for the mistake : i'm using an Synology DS216+ with DSM 6.2. Thanks for your help
solabc16 379 Posted July 2, 2018 Posted July 2, 2018 (edited) Hello @@marcelp54 No problem at all, thanks for the information - we've identified and addressed the issue. Best - James Edited July 2, 2018 by solabc16
maverick4285 0 Posted September 5, 2018 Posted September 5, 2018 (edited) Hi, I have the same problem with DS413 + Thanks for your help Edited September 5, 2018 by maverick4285
solabc16 379 Posted September 5, 2018 Posted September 5, 2018 Hello @@maverick4285 Assuming you mean the DS413 (there isn't a '+' model), this has a Qoriq processor, which unfortunately we are unable to support due to external constraints. There is a note on the Synology section here: https://emby.media/nas-server.html Best - James
maverick4285 0 Posted September 5, 2018 Posted September 5, 2018 (edited) no update planned? Edited September 5, 2018 by maverick4285
solabc16 379 Posted September 5, 2018 Posted September 5, 2018 Hello @@maverick4285 We spent quite a bit of time, with the help of some of the community members, to see if we could support this platform; but in the end it just wasn't practical. The missing component is the runtime (Mono) and to port this to the QorIQ P1022 (e500 v2) processor would take significant time/resource; more than we would be able to commit. We do keep monitoring for any developments, but given the age of the platform and processor it's increasingly unlikely. Best - James
irfan 0 Posted September 23, 2018 Posted September 23, 2018 (edited) Hi all, Sorry to piggyback off this topic, but I'm having the same problem with my DS213j running DSM 6.2-23739 Update 2. Any ideas? Thanks irfan Edited September 23, 2018 by irfan
solabc16 379 Posted September 23, 2018 Posted September 23, 2018 Hello @@irfan The DS213j is fully supported and I can see we have users downloading and installed for that platform, and the 'armada370' architecture in general. Can you PM me your public IP address, so I can check the logs. Are you running any VPN software? Certain configurations have been known to cause issues with outbound connectivity for other users. Best - James
irfan 0 Posted September 23, 2018 Posted September 23, 2018 Thanks for replying! The weird thing is just as your reply came in I tried again, having changed nothing, and the file is there now!? Installing as I write... Cheers irfan
solabc16 379 Posted September 23, 2018 Posted September 23, 2018 Hello @@irfan How recently did you add Emby to your Package Center configuration? We have noticed that DSM 6.2 can be a little slow at picking up changes. Best - James
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now