Jump to content

Docker won't start after update


sebasmiles
 Share

Recommended Posts

sebasmiles

 System: Unraid

Docker: Latest (as of 11/02/20)

So after the latest docker update, my docker doesn't start. So far all my other dockers are doing well.
Below is what it shows me in the docker log, the emby log (from the folder on the shared) isn't showing anything at all since the update so something is happening before it starts saving it.

Let me know if there is some other way to pull log info.

Update: When I pulled the logs directly from Docker command prompt. the "r" line in logs was actually "Bus error"

[s6-init] making user provided files available at /var/run/s6/etc...exited 0.
[s6-init] ensuring user provided files have correct perms...exited 0.
[fix-attrs.d] applying ownership & permissions fixes...
[fix-attrs.d] done.
[cont-init.d] executing container initialization scripts...
[cont-init.d] done.
[services.d] starting services
[services.d] done.
Bus error
[cont-finish.d] executing container finish scripts...
[cont-finish.d] done.
[s6-finish] waiting for services.
[s6-finish] sending all processes the TERM signal.
[s6-finish] sending all processes the KILL signal and exiting.
[s6-init] making user provided files available at /var/run/s6/etc...exited 0.
[s6-init] ensuring user provided files have correct perms...exited 0.
[fix-attrs.d] applying ownership & permissions fixes...
[fix-attrs.d] done.
[cont-init.d] executing container initialization scripts...
[cont-init.d] done.
[services.d] starting services
[services.d] done.
Bus error
[cont-finish.d] executing container finish scripts...
[cont-finish.d] done.
[s6-finish] waiting for services.
[s6-finish] sending all processes the TERM signal.
[s6-finish] sending all processes the KILL signal and exiting.
[s6-init] making user provided files available at /var/run/s6/etc...exited 0.
[s6-init] ensuring user provided files have correct perms...exited 0.
[fix-attrs.d] applying ownership & permissions fixes...
[fix-attrs.d] done.
[cont-init.d] executing container initialization scripts...
[cont-init.d] done.
[services.d] starting services
[services.d] done.
Bus error
[cont-finish.d] executing container finish scripts...
[cont-finish.d] done.
[s6-finish] waiting for services.
[s6-finish] sending all processes the TERM signal.
[s6-finish] sending all processes the KILL signal and exiting.
[s6-init] making user provided files available at /var/run/s6/etc...exited 0.
[s6-init] ensuring user provided files have correct perms...exited 0.
[fix-attrs.d] applying ownership & permissions fixes...
[fix-attrs.d] done.
[cont-init.d] executing container initialization scripts...
[cont-init.d] done.
[services.d] starting services
[services.d] done.
Bus error
[cont-finish.d] executing container finish scripts...
[cont-finish.d] done.
[s6-finish] waiting for services.
[s6-finish] sending all processes the TERM signal.
[s6-finish] sending all processes the KILL signal and exiting.
[s6-init] making user provided files available at /var/run/s6/etc...exited 0.
[s6-init] ensuring user provided files have correct perms...exited 0.
[fix-attrs.d] applying ownership & permissions fixes...
[fix-attrs.d] done.
[cont-init.d] executing container initialization scripts...
[cont-init.d] done.
[services.d] starting services
[services.d] done.
Bus error
[cont-finish.d] executing container finish scripts...
[cont-finish.d] done.
[s6-finish] waiting for services.
[s6-finish] sending all processes the TERM signal.
[s6-finish] sending all processes the KILL signal and exiting.
[s6-init] making user provided files available at /var/run/s6/etc...exited 0.
[s6-init] ensuring user provided files have correct perms...exited 0.
[fix-attrs.d] applying ownership & permissions fixes...
[fix-attrs.d] done.
[cont-init.d] executing container initialization scripts...
[cont-init.d] done.
[services.d] starting services
[services.d] done.
Bus error
[cont-finish.d] executing container finish scripts...
[cont-finish.d] done.
[s6-finish] waiting for services.
[s6-finish] sending all processes the TERM signal.
[s6-finish] sending all processes the KILL signal and exiting.

 

Edited by sebasmiles
Link to comment
Share on other sites

sebasmiles

I'm not the most adept at commands, but I tried doing a force update on unraid for it, nothing downloaded. I also went in thru the console and did "docker pull emby/embyserver", it says its up to date. Am I using the wrong command?

Using default tag: latest
latest: Pulling from emby/embyserver
Digest: sha256:d0ebfc4250824f4140ae9564f06f4dd29f69790d85bf1b855066c10fdb88f0ef
Status: Image is up to date for emby/embyserver:latest
docker.io/emby/embyserver:latest

Here is the info on my system:

Unraid: 6.8.2
M/B: ASRock B75 Pro3-M Version - s/n:
BIOS: American Megatrends Inc. Version P1.70. Dated: 03/02/2013
CPU: Intel® Xeon® CPU E3-1225 V2 @ 3.20GHz
HVM: Enabled
IOMMU: Disabled
Cache: 1024 KiB, 256 KiB, 8192 KiB
Memory: 16 GiB DDR3 (max. installable capacity 32 GiB)
Network: eth0: 1000 Mbps, full duplex, mtu 1500
Kernel: Linux 4.19.98-Unraid x86_64
OpenSSL: 1.1.1d

Here is the start of the emby log from before the upgrade (in case it helps).

2020-11-01 23:00:00.043 Info App: Application version: 4.5.2.0
2020-11-01 23:00:00.055 Info App: Emby
	Command line: /system/EmbyServer.dll -programdata /config -ffdetect /bin/ffdetect -ffmpeg /bin/ffmpeg -ffprobe /bin/ffprobe -restartexitcode 3
	Operating system: Linux version 4.19.98-Unraid (root@Develop) (gcc version 9.2.0 (GCC)) #1 SMP Sun Jan 26 09:15:03 PST 2020
	Framework: .NET Core 3.1.7
	OS/Process: x64/x64
	Runtime: system/System.Private.CoreLib.dll
	Processor count: 4
	Data path: /config
	Application path: /system
2020-11-01 23:00:00.055 Info App: Plugins:
	Auto Box Sets 1.2.5.0
	Bluray Folder Support 1.0.0.0
	Cinema Intros 1.0.35.0
	Dlna 1.0.39.0
	Dvd Folder Support 1.0.0.0
	Fanart.tv 1.0.10.0
	IMVDb 1.0.8.0
	Kodi companion 2.1.9.0
	MovieDb 1.3.8.0
	MusicBrainz 1.0.13.0
	Nfo Metadata 1.0.34.0
	OMDb 1.0.11.0
	Open Subtitles 1.0.27.0
	Port Mapper 1.0.4.0
	Studio Images 1.0.3.0
	TheAudioDb 1.0.11.0
	TheTVDB 1.0.35.0
	Trailers 1.2.9.0
	Webhooks 1.0.13.0

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...