KneelBeforeZod 5 Posted February 10 Share Posted February 10 (edited) Emby 4.8.1.0 running as an app on TrueNAS SCALE Emby app on Android (v8 IIRC) phone TrueNAS SCALE 22.12.3.2 Primare NP5 network streamer` FireFox 122.0.1 (64-bit) (but this is not browser related) First let me say that in experimenting with this, I installed Jellyfin onto the TrueNAS box with the same default settings as had installed Emby and it worked (only one of Jellyfin or Emeby running at the same time). So the installation onto the TrueNAS box (as an app from the Truecharts catalogue) worked fine and the server started up ok. Added a library and all well. From the web client I can play music to my laptop. Android app also works. The Primare NP5 is a network streamer hardwired via an Ethernet cable to the TrueNAS box. The Primare Prisma Android app detects the NP5 on the network and connect (but the app is rubbish and I do not wish to use it). Emby detects the NP5 too. "Enable DLNA Play To" is enabled I can select the NP5 as the target, yet no music is played and the player control does not appear at the bottom of the screen as it would normally do. It's as if the "Play" contrrol had not been clicked. When I tested with Jellyfin, I can select the NP5 as the target and streat a file to it. The playbacl control bar appears at the bottom of the browser window and the Jellyfin also reflects the NP% playback state. In addition, the Primare Prisma Android app reflects the playback state too, showing the file being played and the elapsed time etc. But I don't want to use Jellyfin as I prefer Emby (although I know that JF is a fork of Emby). So devices do seem to be correctly connected on the network and communicating. Same FireFox 122.0.1 (64-bit) browser used in all cases and from a fresh restart with all data cleared. The attached logs are from a completely fresh install of the Emby app on TrueNAS and the defaults accepted. I have spent most of today fiddling around with Emby, Jellyfin and Plex (urgh), searching for answers online and even looking at the source code but with no success. I'd be very grateful for your help in resolving this issue. I filed it in the DLNA forum category although I do not know for sure that this is DLNA related. embyserver.txt hardware_detection-63843186219.txt Edited February 10 by KneelBeforeZod Link to comment Share on other sites More sharing options...
KneelBeforeZod 5 Posted February 11 Author Share Posted February 11 TL;DR: Emby recognises a DLNA target but won't stream music to it. Link to comment Share on other sites More sharing options...
KneelBeforeZod 5 Posted February 12 Author Share Posted February 12 So I enabled debug logging and looked into this in more detail. This always appears in the logs when trying to play a track on the NP5: 2024-02-12 13:04:15.587 Warn Server: AUTH-ERROR: 192.168.0.125 - Access token is invalid or expired. 2024-02-12 13:04:15.588 Error Server: Access token is invalid or expired. It looks like Emby successfully establlishes a session with the NP5 and an API key is generated but later that same key is rejected. It's not clear to me from the logs whether the key is rejected by Emby or the NP5. I have attached the latest server debug log and the XML files retrieved from the NP5 when the session is established. It's worth mentioning that although the log files suggest a successful session to the NP5 has been established, and I can select the NP5 as a target for playback, the NP5 is not shown in the "Devices" screen (other clients are such as the web browser and Android phone). @LukeAre you able to help with this? embyserver.txt np5-AVTransport.xml np5-ConnectionManager.xml np5-description.xml Link to comment Share on other sites More sharing options...
Luke 37155 Posted February 12 Share Posted February 12 Hi, the access token in the log shows up in the api keys section, right? This seems to only happen with certain devices and in my experience so far, devices that are running very old dlna software. We currently don't have a device that this reproduces on and are actively searching for one. But my theory is that I don't think the server is invaliding or rejecting the api key. I think it has something to do with the way the url is being encoded. Link to comment Share on other sites More sharing options...
KneelBeforeZod 5 Posted February 12 Author Share Posted February 12 Yes, the Emby Server DLNA API key 5c4470bd78514eb786c22cd87bbd768c is the same as in the logs and on these lines: 2024-02-12 13:04:15.475 Info Server: http/1.1 HEAD http://192.168.0.200:8096/audio/5/original.mp3?DeviceProfileId=f24c1c58d22d43b1abfdfed9a3b687b2&DeviceId=uuid:bcd8c2e2-c9a6-11ee-99f2-717963a9709d&MediaSourceId=5d59a0a15e3b2e4b35f1958ce478e1da&PlaySessionId=686b050854c94cc6aa78beb6428540e6&api_key=5c4470bd78514eb786c22cd87bbd768c. Accept=text/html,application/xhtml+xml,application/xml;q=0.9,audio/*;q=0.6, Host=192.168.0.200:8096, User-Agent=CyberGarage-HTTP/1.0 2024-02-12 13:04:15.516 Info Server: http/1.1 Response 200 to 192.168.0.125. Time: 40ms. HEAD http://192.168.0.200:8096/audio/5/original.mp3?DeviceProfileId=f24c1c58d22d43b1abfdfed9a3b687b2&DeviceId=uuid:bcd8c2e2-c9a6-11ee-99f2-717963a9709d&MediaSourceId=5d59a0a15e3b2e4b35f1958ce478e1da&PlaySessionId=686b050854c94cc6aa78beb6428540e6&api_key=5c4470bd78514eb786c22cd87bbd768c 2024-02-12 13:04:15.587 Info Server: http/1.1 GET http://192.168.0.200:8096/audio/5/original.mp3?DeviceProfileId=f24c1c58d22d43b1abfdfed9a3b687b2&DeviceId=uuid:bcd8c2e2-c9a6-11ee-99f2-717963a9709d&MediaSourceId=5d59a0a15e3b2e4b35f1958ce478e1da&PlaySessionId=686b050854c94cc6aa78beb6428540e6&api_key=5c4470bd78514eb786c22cd87bbd768c. Connection=keep-alive, Host=192.168.0.200:8096, User-Agent=stagefright/1.2 (Linux;Android, Accept-Encoding=gzip,deflate 2024-02-12 13:04:15.587 Warn Server: AUTH-ERROR: 192.168.0.125 - Access token is invalid or expired. 2024-02-12 13:04:15.588 Error Server: Access token is invalid or expired. 2024-02-12 13:04:15.589 Info Server: http/1.1 Response 401 to 192.168.0.125. Time: 4ms. GET http://192.168.0.200:8096/audio/5/original.mp3?DeviceProfileId=f24c1c58d22d43b1abfdfed9a3b687b2&DeviceId=uuid:bcd8c2e2-c9a6-11ee-99f2-717963a9709d&MediaSourceId=5d59a0a15e3b2e4b35f1958ce478e1da&PlaySessionId=686b050854c94cc6aa78beb6428540e6&api_key=5c4470bd78514eb786c22cd87bbd768c Link to comment Share on other sites More sharing options...
Luke 37155 Posted February 13 Share Posted February 13 Ok I think I will need to update the logging to be more specific about the access token that was checked. I bet it is either empty or has something else tacked onto it. Link to comment Share on other sites More sharing options...
KneelBeforeZod 5 Posted February 13 Author Share Posted February 13 (edited) Thanks Luke. I can provide Wireshark logs if that would help. I did have a dig around with Wireshark but didn't find it useful (but that's more to do with my lack of expertise with that software). Interesting that Jellyfin does not have this issue. There doesn't seem to be a verbose logging option so I can't capture anything for comparison there, but perhaps the Wireshark capture would be a useful comparison. Edited February 13 by KneelBeforeZod Link to comment Share on other sites More sharing options...
Luke 37155 Posted February 13 Share Posted February 13 it's our old code from a long time ago when those dlna api's did not have any authentication on them. Link to comment Share on other sites More sharing options...
Luke 37155 Posted February 13 Share Posted February 13 6 hours ago, KneelBeforeZod said: I did have a dig around with Wireshark but didn't find it useful (but that's more to do with my lack of expertise with that software). Were you able to locate this request from player to server in the wireshark logs? 2024-02-12 13:04:15.587 Info Server: http/1.1 GET http://192.168.0.200:8096/audio/5/original.mp3?DeviceProfileId=f24c1c58d22d43b1abfdfed9a3b687b2&DeviceId=uuid:bcd8c2e2-c9a6-11ee-99f2-717963a9709d&MediaSourceId=5d59a0a15e3b2e4b35f1958ce478e1da&PlaySessionId=686b050854c94cc6aa78beb6428540e6&api_key=5c4470bd78514eb786c22cd87bbd768c. Connection=keep-alive, Host=192.168.0.200:8096, User-Agent=stagefright/1.2 (Linux;Android, Accept-Encoding=gzip,deflate Link to comment Share on other sites More sharing options...
KneelBeforeZod 5 Posted February 13 Author Share Posted February 13 No I wasn't, but that might be a lack of expertise with Wireshark. I added "ip.addr == 192.168.0.200" as a filter, selected the NP5 as the DLNA target and hit the play button for a test track Emby (web client). This was all I saw after capturing packets for a few seconds: No. Time Source Destination Protocol Length Info 35 2024-02-13 08:31:20.714744 192.168.0.50 192.168.0.200 TLSv1.2 133 Application Data 36 2024-02-13 08:31:20.726119 192.168.0.200 192.168.0.50 TLSv1.2 128 Application Data 37 2024-02-13 08:31:20.726186 192.168.0.50 192.168.0.200 TCP 66 64078 → 443 [ACK] Seq=68 Ack=63 Win=2047 Len=0 TSval=2322010559 TSecr=2790627383 38 2024-02-13 08:31:21.584496 192.168.0.50 192.168.0.200 HTTP 824 POST /emby/Sessions/7f33799a4daa89c0c2e98e85ed06326f/Playing?ItemIds=5&PlayCommand=PlayNow&X-Emby-Client=Emby+Web&X-Emby-Device-Name=Firefox+macOS&X-Emby-Device-Id=TW96aWxsYS81LjAgKE1hY2ludG9zaDsgSW50ZWwgTWFjIE9TIFggMTAuMTU7IHJ2OjEyMi4wKSBHZWNrby8yMDEwMDEwMSBGaXJlZm94LzEyMi4wfDE3MDc2NzEzNzM2MDA1&X-Emby-Client-Version=4.8.1.0&X-Emby-Token=d7b4f9b1041c457994356616b4a2e9b4&X-Emby-Language=en-gb HTTP/1.1 39 2024-02-13 08:31:21.629341 192.168.0.200 192.168.0.50 TCP 66 8096 → 64223 [ACK] Seq=1 Ack=759 Win=501 Len=0 TSval=2790628288 TSecr=955075932 40 2024-02-13 08:31:22.025683 192.168.0.200 192.168.0.50 HTTP 1018 HTTP/1.1 204 No Content 41 2024-02-13 08:31:22.025805 192.168.0.50 192.168.0.200 TCP 66 64223 → 8096 [ACK] Seq=759 Ack=953 Win=2033 Len=0 TSval=955076371 TSecr=2790628659 44 2024-02-13 08:31:23.205532 192.168.0.50 192.168.0.200 TCP 54 64224 → 8096 [ACK] Seq=1 Ack=1 Win=2048 Len=0 48 2024-02-13 08:31:23.216498 192.168.0.200 192.168.0.50 TCP 66 [TCP ACKed unseen segment] 8096 → 64224 [ACK] Seq=1 Ack=2 Win=501 Len=0 TSval=2790629873 TSecr=1884196675 51 2024-02-13 08:31:23.316608 192.168.0.50 192.168.0.200 TCP 54 64221 → 8096 [ACK] Seq=1 Ack=1 Win=2048 Len=0 52 2024-02-13 08:31:23.318390 192.168.0.200 192.168.0.50 TCP 66 [TCP ACKed unseen segment] 8096 → 64221 [ACK] Seq=1 Ack=2 Win=501 Len=0 TSval=2790629977 TSecr=2096720768 73 2024-02-13 08:31:27.198630 192.168.0.50 192.168.0.200 TLSv1.2 133 Application Data 74 2024-02-13 08:31:27.209170 192.168.0.200 192.168.0.50 TLSv1.2 129 Application Data 75 2024-02-13 08:31:27.209311 192.168.0.50 192.168.0.200 TCP 66 64078 → 443 [ACK] Seq=135 Ack=126 Win=2047 Len=0 TSval=2322017015 TSecr=2790633866 Link to comment Share on other sites More sharing options...
Luke 37155 Posted February 13 Share Posted February 13 Maybe go up to 10 seconds? Link to comment Share on other sites More sharing options...
KneelBeforeZod 5 Posted February 13 Author Share Posted February 13 (edited) I'll do 15 seconds with the filter set to "ip.addr == 192.168.0.200 or ip.addr == 192.168.0.125". Edited February 13 by KneelBeforeZod Link to comment Share on other sites More sharing options...
KneelBeforeZod 5 Posted February 13 Author Share Posted February 13 15 seconds with filter "ip.addr == 192.168.0.200 or ip.addr == 192.168.0.125": No. Time Source Destination Protocol Length Info 11 2024-02-13 08:49:22.889346 192.168.0.50 192.168.0.125 TCP 176 64072 → 8009 [PSH, ACK] Seq=1 Ack=1 Win=2048 Len=110 TSval=40786254 TSecr=7104248 [TCP segment of a reassembled PDU] 12 2024-02-13 08:49:22.899375 192.168.0.125 192.168.0.50 TCP 176 8009 → 64072 [PSH, ACK] Seq=1 Ack=111 Win=351 Len=110 TSval=7104749 TSecr=40786254 [TCP segment of a reassembled PDU] 13 2024-02-13 08:49:22.899507 192.168.0.50 192.168.0.125 TCP 66 64072 → 8009 [ACK] Seq=111 Ack=111 Win=2046 Len=0 TSval=40786264 TSecr=7104749 21 2024-02-13 08:49:24.991903 192.168.0.50 192.168.0.200 TCP 78 64383 → 8096 [SYN] Seq=0 Win=65535 Len=0 MSS=1460 WS=64 TSval=250622665 TSecr=0 SACK_PERM 22 2024-02-13 08:49:24.994451 192.168.0.200 192.168.0.50 TCP 74 8096 → 64383 [SYN, ACK] Seq=0 Ack=1 Win=65160 Len=0 MSS=1460 SACK_PERM TSval=2791711661 TSecr=250622665 WS=128 23 2024-02-13 08:49:24.994511 192.168.0.50 192.168.0.200 TCP 66 64383 → 8096 [ACK] Seq=1 Ack=1 Win=131712 Len=0 TSval=250622667 TSecr=2791711661 24 2024-02-13 08:49:24.994756 192.168.0.50 192.168.0.200 HTTP 824 POST /emby/Sessions/7f33799a4daa89c0c2e98e85ed06326f/Playing?ItemIds=5&PlayCommand=PlayNow&X-Emby-Client=Emby+Web&X-Emby-Device-Name=Firefox+macOS&X-Emby-Device-Id=TW96aWxsYS81LjAgKE1hY2ludG9zaDsgSW50ZWwgTWFjIE9TIFggMTAuMTU7IHJ2OjEyMi4wKSBHZWNrby8yMDEwMDEwMSBGaXJlZm94LzEyMi4wfDE3MDc2NzEzNzM2MDA1&X-Emby-Client-Version=4.8.1.0&X-Emby-Token=d7b4f9b1041c457994356616b4a2e9b4&X-Emby-Language=en-gb HTTP/1.1 25 2024-02-13 08:49:24.998266 192.168.0.200 192.168.0.50 TCP 66 8096 → 64383 [ACK] Seq=1 Ack=759 Win=64512 Len=0 TSval=2791711664 TSecr=250622667 26 2024-02-13 08:49:25.087868 192.168.0.200 192.168.0.50 HTTP 1018 HTTP/1.1 204 No Content 27 2024-02-13 08:49:25.087973 192.168.0.50 192.168.0.200 TCP 66 64383 → 8096 [ACK] Seq=759 Ack=953 Win=130816 Len=0 TSval=250622759 TSecr=2791711751 39 2024-02-13 08:49:27.905180 192.168.0.50 192.168.0.125 TCP 176 64072 → 8009 [PSH, ACK] Seq=111 Ack=111 Win=2048 Len=110 TSval=40791248 TSecr=7104749 [TCP segment of a reassembled PDU] 40 2024-02-13 08:49:27.920380 192.168.0.125 192.168.0.50 TCP 176 8009 → 64072 [PSH, ACK] Seq=111 Ack=221 Win=351 Len=110 TSval=7105251 TSecr=40791248 [TCP segment of a reassembled PDU] 41 2024-02-13 08:49:27.920529 192.168.0.50 192.168.0.125 TCP 66 64072 → 8009 [ACK] Seq=221 Ack=221 Win=2046 Len=0 TSval=40791263 TSecr=7105251 57 2024-02-13 08:49:32.922510 192.168.0.50 192.168.0.125 TCP 176 64072 → 8009 [PSH, ACK] Seq=221 Ack=221 Win=2048 Len=110 TSval=40796252 TSecr=7105251 [TCP segment of a reassembled PDU] 58 2024-02-13 08:49:32.932749 192.168.0.125 192.168.0.50 TCP 176 8009 → 64072 [PSH, ACK] Seq=221 Ack=331 Win=351 Len=110 TSval=7105752 TSecr=40796252 [TCP segment of a reassembled PDU] 59 2024-02-13 08:49:32.932861 192.168.0.50 192.168.0.125 TCP 66 64072 → 8009 [ACK] Seq=331 Ack=331 Win=2046 Len=0 TSval=40796262 TSecr=7105752 65 2024-02-13 08:49:33.429160 192.168.0.125 224.0.0.251 MDNS 413 Standard query response 0x0000 PTR Primare-NP5-c3790e1fad7bbb5facce46a806c6f6b2._googlecast._tcp.local TXT, cache flush SRV, cache flush 0 0 8009 c3790e1f-ad7b-bb5f-acce-46a806c6f6b2.local A, cache flush 192.168.0.125 68 2024-02-13 08:49:35.179910 192.168.0.50 192.168.0.200 TCP 54 [TCP Keep-Alive] 64383 → 8096 [ACK] Seq=758 Ack=953 Win=131072 Len=0 69 2024-02-13 08:49:35.189196 192.168.0.200 192.168.0.50 TCP 66 [TCP Keep-Alive ACK] 8096 → 64383 [ACK] Seq=953 Ack=759 Win=64512 Len=0 TSval=2791721856 TSecr=250622759 79 2024-02-13 08:49:37.933746 192.168.0.50 192.168.0.125 TCP 176 64072 → 8009 [PSH, ACK] Seq=331 Ack=331 Win=2048 Len=110 TSval=40801248 TSecr=7105752 [TCP segment of a reassembled PDU] 80 2024-02-13 08:49:37.945833 192.168.0.125 192.168.0.50 TCP 176 8009 → 64072 [PSH, ACK] Seq=331 Ack=441 Win=351 Len=110 TSval=7106254 TSecr=40801248 [TCP segment of a reassembled PDU] 81 2024-02-13 08:49:37.945903 192.168.0.50 192.168.0.125 TCP 66 64072 → 8009 [ACK] Seq=441 Ack=441 Win=2046 Len=0 TSval=40801260 TSecr=7106254 82 2024-02-13 08:49:38.465708 192.168.0.50 192.168.0.200 TLSv1.2 131 Application Data 83 2024-02-13 08:49:38.467010 192.168.0.50 192.168.0.200 TLSv1.2 132 Application Data 84 2024-02-13 08:49:38.467764 192.168.0.50 192.168.0.200 TLSv1.2 130 Application Data 85 2024-02-13 08:49:38.468517 192.168.0.50 192.168.0.200 TLSv1.2 133 Application Data 86 2024-02-13 08:49:38.476235 192.168.0.200 192.168.0.50 TCP 66 443 → 64078 [ACK] Seq=1 Ack=263 Win=501 Len=0 TSval=2791725142 TSecr=2323102343 87 2024-02-13 08:49:38.478967 192.168.0.200 192.168.0.50 TLSv1.2 132 Application Data 88 2024-02-13 08:49:38.478978 192.168.0.200 192.168.0.50 TLSv1.2 131 Application Data 89 2024-02-13 08:49:38.478981 192.168.0.200 192.168.0.50 TLSv1.2 131 Application Data 90 2024-02-13 08:49:38.478984 192.168.0.200 192.168.0.50 TLSv1.2 131 Application Data 91 2024-02-13 08:49:38.479142 192.168.0.50 192.168.0.200 TCP 66 64078 → 443 [ACK] Seq=263 Ack=197 Win=2044 Len=0 TSval=2323102354 TSecr=2791725145 92 2024-02-13 08:49:38.479143 192.168.0.50 192.168.0.200 TCP 66 64078 → 443 [ACK] Seq=263 Ack=262 Win=2043 Len=0 TSval=2323102354 TSecr=2791725145 160 2024-02-13 08:49:42.948848 192.168.0.50 192.168.0.125 TCP 176 64072 → 8009 [PSH, ACK] Seq=441 Ack=441 Win=2048 Len=110 TSval=40806237 TSecr=7106254 [TCP segment of a reassembled PDU] 161 2024-02-13 08:49:42.952126 192.168.0.125 192.168.0.50 TCP 176 8009 → 64072 [PSH, ACK] Seq=441 Ack=551 Win=351 Len=110 TSval=7106754 TSecr=40806237 [TCP segment of a reassembled PDU] 162 2024-02-13 08:49:42.952223 192.168.0.50 192.168.0.125 TCP 66 64072 → 8009 [ACK] Seq=551 Ack=551 Win=2046 Len=0 TSval=40806240 TSecr=7106754 174 2024-02-13 08:49:45.281838 192.168.0.50 192.168.0.200 TCP 54 [TCP Keep-Alive] 64383 → 8096 [ACK] Seq=758 Ack=953 Win=131072 Len=0 175 2024-02-13 08:49:45.291462 192.168.0.200 192.168.0.50 TCP 66 [TCP Keep-Alive ACK] 8096 → 64383 [ACK] Seq=953 Ack=759 Win=64512 Len=0 TSval=2791731958 TSecr=250622759 182 2024-02-13 08:49:47.956203 192.168.0.50 192.168.0.125 TCP 176 64072 → 8009 [PSH, ACK] Seq=551 Ack=551 Win=2048 Len=110 TSval=40811225 TSecr=7106754 [TCP segment of a reassembled PDU] 183 2024-02-13 08:49:47.972033 192.168.0.125 192.168.0.50 TCP 176 8009 → 64072 [PSH, ACK] Seq=551 Ack=661 Win=351 Len=110 TSval=7107256 TSecr=40811225 [TCP segment of a reassembled PDU] 184 2024-02-13 08:49:47.972146 192.168.0.50 192.168.0.125 TCP 66 64072 → 8009 [ACK] Seq=661 Ack=661 Win=2046 Len=0 TSval=40811240 TSecr=7107256 1 Link to comment Share on other sites More sharing options...
KneelBeforeZod 5 Posted February 14 Author Share Posted February 14 Were those Wireshark logs helpful @Luke? Link to comment Share on other sites More sharing options...
Luke 37155 Posted February 17 Share Posted February 17 Hi, did you say that you just recently setup Emby? In other words, if you're still experimenting are you fine with installing the beta server to help narrow this down? I added a logging statement to the 4.9 beta channel that will tell us what access token was rejected. Thanks. Link to comment Share on other sites More sharing options...
KneelBeforeZod 5 Posted February 18 Author Share Posted February 18 (edited) Hello Luke. Yes, I recently set-up Emby and I will install 4.9 beta, enable all the logging and report back. Is the beta available on the TrueNAS SCALE catalogue? I kinda gave up on the NP5 for the moment and borrowed a Pro-Jekt Stream Box S2 Ultra and and Emby connects to that just fine... until the connection is lost, but I guess that's a different topic. If I can get the NP5 working though then I'll stick with that. Edited February 18 by KneelBeforeZod Link to comment Share on other sites More sharing options...
KneelBeforeZod 5 Posted February 18 Author Share Posted February 18 (edited) Forget TrueNAS SCALE - I can install the beta on macOS and test it from there. 2019 Intel MacBook Pro. I did install Emby on macOS to see if this issue persisted, and it it did so I know I can reproduce the problem with a beta release. Can't see a beta channel for macOS though - only WIndows. Edited February 18 by KneelBeforeZod Link to comment Share on other sites More sharing options...
Luke 37155 Posted February 18 Share Posted February 18 Yea we'll have the macOS beta up Monday night. Thanks. 1 Link to comment Share on other sites More sharing options...
Luke 37155 Posted February 21 Share Posted February 21 You can grab the beta macOS build here: https://github.com/MediaBrowser/Emby.Releases/releases/tag/4.9.0.5 Link to comment Share on other sites More sharing options...
KneelBeforeZod 5 Posted February 21 Author Share Posted February 21 Thanks Luke. I'd been keeping an eye out for it here: https://emby.media/mac-server.html I'll download and install the beta and report back with the log file. 1 Link to comment Share on other sites More sharing options...
KneelBeforeZod 5 Posted February 22 Author Share Posted February 22 (edited) Please find attached the server log for 4.9.0.5 beta on macOS with debug and DLNA logging enabled. Also the hardware detection log. embyserver.txt hardware_detection-63844222406.txt Edited February 22 by KneelBeforeZod Link to comment Share on other sites More sharing options...
Luke 37155 Posted February 22 Share Posted February 22 OK, I still need more logging, so what I've done is I've replaced the macOS 4.9.0.5 builds with an updated version that will print more the log for me. Can you please download it again from our website, install over the top of your current version, repeat the test a provide a new log? Thanks. 1 Link to comment Share on other sites More sharing options...
KneelBeforeZod 5 Posted February 22 Author Share Posted February 22 Hello Luke. As requested, logs from that updated 4.9.0.5 beta build. DLNA and debug logging enabled. embyserver.txt Link to comment Share on other sites More sharing options...
Luke 37155 Posted February 22 Share Posted February 22 OK, thanks. Going to have to do this one more time. I've replaced the macOS 4.9.0.5 builds with an updated version that will print more the log for me. Can you please download it again from our website, install over the top of your current version, repeat the test a provide a new log? Thanks. 1 Link to comment Share on other sites More sharing options...
KneelBeforeZod 5 Posted February 22 Author Share Posted February 22 Hello Luke. Thank you for your continuing support with this issue. I am happy to do this as many times as necessary in order to get an answer to the problem. New log attached. I had already eraased Emby from my Mac (plus its config directory) so did a clean install. embyserver.txt Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now