All Activity

Why do you think you need to use the split DNS configuration and use the same name on both networks? Is Caddy only used for WAN access and LAN is direct to the server? Are you trying to use HTTPS on both WAN and LAN? Apps on mobile devices can already switch between LAN and WAN connections as long as the Emby network settings are correct. One of the problems with DNS these days is the advent of DoH and how some applications and possibly devices can choose to override or ignore your network settings for name resolution.

@andreilis?

.

11:18:15.862 [AVHWDeviceContext @ 0000013cb37464c0] Using D3D11 device 8086:4680 (Intel(R) UHD Graphics 770). 11:18:16.223 Stream #0:0 (av1) -> hwmap:default (graph 0) 11:18:16.223 vpp_qsv:default (graph 0) -> Stream #0:0 (h264_qsv) >>>>>> Hardware Decoders for av1 [X] QuickSync Intel UHD Graphics 770 - AV1 [X] DX11VA Intel UHD Graphics 770 - AV1 >>>>>> Hardware Encoders for h264 [X] QuickSync Intel UHD Graphics 770 - H.264 (AVC) >>>>>> Selected Codecs Decoder DX11VA Intel UHD Graphics 770 - AV1 Adapter #0: 'Intel(R) UHD Graphics 770' Id:18048 (Driver: , Vendor: 32902) Max Bitrate: 293 Mbit/s - Frame Sizes: max 8192x4352 Color Formats: NV12, P010, YUV420P - Bit Depths: 8, 10 Profiles: Main (Level 5.0) Encoder QuickSync Intel UHD Graphics 770 - H.264 (AVC) Adapter #0: 'Intel(R) UHD Graphics 770' Id:18048 (Driver: , Vendor: 32902, SDK Version: 1.255) Max Bitrate: 234 Mbit/s - Frame Sizes: 32x32...4096x4096 - Width Alignment: 16 - Height Alignment: 16 Color Formats: NV12 - Bit Depths: 8 Profiles: Baseline Profile (Level 5.2), Main Profile (Level 5.2), High Profile (Level 5.2) Can you uncheck DX11VA in your advanced hardware transcoding settings for decoding and see if it works with both decode/encode using quicksync? The issue might be caused by different methods decoding and encoding the material.

Hello, I'm a Plex user, but I've been trying Emby these days and it seems like a good alternative except for a few details. In the image, you can see how it's transcoding TrueHD audio to AC3 at 384Kbps. Here's where I find the first difference. This conversion could be done to FLAC since Apple TV supports it, maintaining lossless quality. That's how Plex does it. Another issue is that when selecting a PGS subtitle, it's also transcoding the video, as shown. I'm not sure of the reason, but Plex doesn't transcode in that case. Lastly, to search for a subtitle, a subscription is required, which isn't the case in Plex.

Hello there, Dune roll out a new firmware update for his Dune HD Homatics Box R 4K Plus. With this update now all missed features working well (Auto Frameswitch and DTS-HD Sound passthrough). With the official EMBY App from the Google Playstore you cannot use DTS or DTS-HD sound via passthrough. There is only silence and my AVR says no audio input. DTS:X passthrough works very well and all other formats, too. I hope this will fixed in the near future. KODI + EMBY plugin works well with DTS / DTS-HD sound.

Try this: http://x.x.x.x:8089/devices/M3U-PlutoTV/channels.m3u?format=ts M3U-PlutoTV - is what Channels should have called Pluto when you added it unless you assigned it a different name - If you look at "Sources" in Channels it will show you the name of each source. That is the name to use.

Yes i installed it over this. I have to search how i can upload the log on my FireTV.

Can I cast from Android phone to Fire Cube 3 ? When I use Emby on my Android phone, several devices are shown, to which I can cast. But not my Fire Cube 3. Is this actually possible?

Now that I have found my old account "lja", Is it possible to delete the "HTConnect" account without affecting "lja"?

You could also try adding by the UNC name vs IP address I am puzzled that VLC won't play it though.... Can you post the M3U? Sanitized of course.

That should be fine. I ran for years on a windows PC with Emby and Channels was running in Docker without issue.

It's only this one video, and it is not h.265. It won't solve the problem, but I might just try re-ripping it and seeing what happens.

ok ill try that soon, by the way, Pluto for channels and channels dvr run on docker on that same machine too.

Try using loopback IP(127.0.0.1) instead of machine IP address 192.x.x.x

Yes they are on the same pc!

We will, it's planned, not just a hopeful.

Thanks again. This is a great guide and I enjoyed getting some experience with Caddy and Cloudflare. I have another question regarding local access. I have split DNS running so tv.mydomain.com resolves to my internal server IP on my network and externally through Cloudflare. I thought this would force local traffic to stay local when at home. It the actual video is still running through Cloudflare. This is the network traffic when watching a video from my local network. The 172 IPs are Cloudflare. My caddyfile is basic (below). Any idea how I can keep this traffic local? It is mainly for mobile device that might be local or remote. { email ***@gmail.com } tv.***.com { tls ***@gmail.com { dns cloudflare ************************************* } log { output file C:\caddy\logs\emby_access.log { roll true # Rotate logs, enabled by default roll_size_mb 10 # Set max size X MB roll_gzip true # Whether to compress rolled files # roll_local_time true # Use localhost time roll_keep 3 # Keep at most X log files roll_keep_days 7 # Keep log files for X days } } encode gzip reverse_proxy http://localhost:8096 { header_up X-Real-IP {remote_host} } }

Did you install the dependencies? Actually, you should install via Emby's Kodi beta repository so the deps are auto installed. No known limitations for FireTV. You may meed to upload the log for review.

Hello Guys, i have a problem on my FireTV Stick. I have installed Kodi Omega 21. I have installed latest Emby Addon after install a message comes up, with error. I can see this in log, so how i can become the log from my FireTV Stick ? I cant select a Server or do any changes for connection to a server ? On my Fire TV Cube it works fine. Is there limitation of FireTV Stick that i cant use Emby Next Gen there ?

looks like the same problem I had with one of my friends...which I'm not sure if is still happening. I never found a root cause, and it kind of fell by the wayside. By chance are you noticing it in h.265 content in particular? My thread on it here

This user is not an admin...

Just leave the password blank there and click save so the user can no longer have a password?

I've watched this video before, and it was fine. This started last night. You can see from the image that there is a green bar across the top of the image, and the image itself is ghosted. This only happens on my roku client, and only with this video. It looks fine on my adroid emby app and windows app. I hope you can help... I've attached every log file I can think of as well as the output from mediainfo. media-info.txt hardware_detection-63851627863.txt ffmpeg-transcode-f4273699-7e0d-4645-92fe-8ef6dc235dbc_1.txt embyserver (1).txt