All Activity

The original collections came from Happyville and from these collections I searched and added them to make my personal collections.

They have for some reason removed the ability to set a default tab on the Roku. Now, if you happen to visit another tab, then next time it will take you there and you have to navigate back to the one you normally want. It's not hard, but it's out of line with the other clients (unless they plan to change them all!), and just that bit less convenient than it used to be. Paul

When enabling the "Settings->General->Screensaver" to "Backdrop Screen Saver", after 5 minutes of delay the Screensaver starts. It presents a random movie backdrop and doesn't cycle. The option "Photo slideshow time per slide" is set to "10 seconds". Also, the movie title and date no longer appear on the backdrop. This works fine with app-version "26.0.21" and is broken in app-version "26.0.22".

I recently migrated from windows server to Linux server. Then went well. I frequently leave a play list on shuffle running through the android app over night. Before the migration it would stop playing less than once a month. Now on the Linux server it stops several times a week. Not every night. Frequently when the phone is checked it's just sitting on the play list screen. Some times the screen is off and the app has to be opened. I've tired clearing the cache on the phone, but that did not help. I'll also note: The linux version doesn't seem as responsive on app open. I've never seen "connecting to server" before. After the migration I see it from time to time. The new linux server is hosted in a k3s node, the pod has no resources restrictions. The new server hardware is a significant upgrade from the previous server. Reviewing resource usage over night show the server required less than 1% requested cpu, and less than 80% requested RAM all night. Any idea what else I can try? Link to switch over thread:

Good glad it’s working! Everyone would appreciate if you submitted what’s missing! If you input your API key it raises the limit to 1000req/day. But as I mentioned above, it’s meant to be more of a throttle than a limitation. A run could take multiple days depending on device power and network speeds.

In your link it says logs would not be sanitized if obtained directly from the logs folder and should not be uploaded in the forums. How do I get them to you? I can let you know that since I last posted I have backed up my configuration to a backup and deleted the Embyserver folder at volume1/@appdata/EmbyServer. I'm assuming that I am now starting on a clean sheet but when I install the file again it takes ages to install and I'm back to the same situation of it freezing. If I install the previous version and restore the backup is that likely to work?

I also had a problem with collections losing items, and it turns out it was because I had set radarr and sonarr to export .nfo files. Apparently they do it not only on first import, but periodically. This caused the edits made by emby to the .nfo files to be ovewritten, including the collection info. If you're using external software to write .nfo files, this could be the cause of the problem.

The fundamentals are looking good now for me. I have information showing up on android and it looks correct. The config made sense to me, far more obvious what was web client and what was image overlay. Observations. The neccessary libary fetcher config was quite squirrelled away in the pdf instrcutions? i wonder wether that is worth surfacing on the plugin config page. The wording "an episode with no still of its own cannot carry a badge" in the pdf instructions ...i didnt readily understand 'still' but i assume this mean an episode with no 'image'? Not all my shows on their continue watching thumbnail showed the correct information at the same time, it took 1 min for everything to catch up? i thought something was broken so it might be worth a note about "patience and timing". (1.2K shows and 55K episodes) Will do a more thorough deep dive/testing tomorrow, but its looking good.

I am working on Hero banner that shows advert videos as well as posters, better control of recordings and collision detection, if your maximum streams remotely are 4 for example it should not allow 5 recordings as one will always fail, video time shift for delayed audio if using sonos like me. Auto detection of stream issues and quick resume instead of freeze stop, Nothing worst than a freeze total stop in the middle of a footie match. Now and next simple overlay let's you seamlessly see whats on and switch channels for live tv, series and movies show the advert video while browsing to help you choose, by far the interface is not perfect and miles away from the official emby release just a few improvements I would like considered in the future and a demonstration of how they could possibly look and work

I hadn’t considered trying the other app, but this one works perfectly and directly plays MPEG-TS and HLS. The Android app, on the other hand, has to remux MPEG-TS to HLS for seeking. I’m curious about the difference in playback capabilities. I might end up using this app instead. The Android app also looks sleek.

Hi, yes please attach the log files. thanks.

Entra en esas pantalla donde añades mas bibliotecas. Pues a la seccion que quieras que aparezca en spotlight, dale al boton de editar y veras una opcion que pone Tipo de vista, ahi encontraras la opción spotlight. Aunque depende creo del tipo de biblioteca.. porque lo he probado y en todas no aparecia.

/4kcontent/4kmovies10/Disclosure Day (2026) {tmdb-1275779}/Disclosure Day (2026) [tmdb-1275779][Remux-2160p][HDR][10bit][HEVC][TrueHD Atmos 7.1]-FraMeSToR.mkv

The stream is HLS, and turning this setting on or off didn’t make a difference. I could still timeshift, but the progress indicator stayed put. There’s no problem when using Tvheadend as a proxy to stream MPEG-TS, which Emby then remuxes to HLS—the progress bar works fine that way. I’ve gone back to using that setup.

I will look into it. Thanks for reporting.

So i just got some serious red ears in a conversation with @Luke. Problem is my plugins have always targeted .net 6 and not netstandard 2 as required by the Emby team (somehow i missed that). Luckily for this plugin i have always maintained a netstandard 2 version of it for various reasons that i will upload instead. It is not as thoroughly tested but *should* be bug free as it's been more or less maintained as 1-1. It will be beta version 2.7.8.0, any one willing to help test please do so this plugin can get on the right track again.

I will upload the result once its more stable for critic ratings, interface initially being developed for windows but may attempt fire tv app also

Tried that been working with vlc, it will seek every stream accept transcoded driving me mad. I will take a break today and try again tomorrow the answer may be staring me in the face just too tired to see it.

HI, there isn't an api for this. You can do this with the normal player api to seek.

Quick question regarding this plugin - does this automatically remove all of the "Latest Added" of the moves and TV shows that is set to the default for Emby? If so, is there a way to create a list for newly added?

Been playing around making my own emby interface but can not figure out how the time shift of a transcoded stream, what is the correct api call to make the server shift the time Working with latest beta edition

Hola, desde cualquier navegador o app de celular con Emby Server local se podia enviar por cast mi musica a mi jbl authenics 500 por UPnP. Ahora que migre Emby Server a un servidor en AWS no funciona el cast, se queda cargando y luego sale error. He hecho de todo y no he podido hacerlo funcionar, es necesario adquirir Emby Premiere para que funcione el cast? en Jellyfin no tiene este problema y se conecta a Cast sin problemas pero Emby me gusta mucho mas. Gracias

Just hard work, though TimeMarkEdit should be rather easy as it isn't the biggest plugin out there.

I have extracted the logs using SSH and can supply them. There are 5 text files. Following guidence using Google AI I have already tried the following: Checking for any plugins and there were none. I have renamed system.xml to system.old I have uninstalled and re installed the latest version but it makes no difference The only way to get control of my NAS back is to kill Emby using SSH

if cover art can do it then I'm sure those can too.