Remote access help please

[rags21 0]

Hi.

i'm      using a virgin media hub 3 trying to set up port forwarding,what do i enter in the blanks,i know my ip address part

thanks

Edited November 30, 2019 by rags21

[rags21 0]

Local IP192.168.0.

 

IP address is invalid.

Local start port

Local end port

External start port

External end port

ProtocolPlease chooseTCPUDPBoth

Please choose

EnabledPlease chooseOffOn

Please choose

 

[rags21 0]

This IS the port triggeri

Port triggering

 

The Port Triggering area allows you to enable dynamic port forwarding for certain services/applications. The Hub 3.0 monitors outgoing traffic on the ports specified in the Trigger Range. When it detects activity on these ports, it remembers the IP address of the device sending the data and routes incoming traffic on ports in the Target Range to that IP address on your network.

Trigger start port

 

Trigger end port

 

Target start port

 

Target end port

 

ProtocolPlease chooseTCPUDPBoth

Please choose

 

EnabledPlease chooseOffOn

Please choose

 

ng page

[rags21 0]

dhcp page 

DHCPv4 server

This sections allows you to configure how the Hub 3.0 assigns IPv4 addresses. It is configured to be a DHCP (Dynamic Host Configuration Protocol) server by default. This provides the TCP/IP configuration for all connected devices.

 Enabled

 Disabled

Starting local address192.168..

Number of CPEs 244

Lease time86400

 

seconds

Edited November 30, 2019 by rags21

[Guest asrequested]

https://github.com/MediaBrowser/Wiki/wiki/Connectivity

[rags21 0]

Watched the video on that page he as just a start and end  mine looks likr this .......

Local IP192.168.0.

Local start port

Local end port

External start port

External end port

ProtocolPlease chooseTCPUDPBoth

Please choose

EnabledPlease chooseOffOn

Please choose

 

 

what goes in to the externalt start and end port?

Edited November 30, 2019 by rags21

[rags21 0]

Done it

[Luke 42086]

Have you resolved it?