SAT>IP

[Luke 42077]

Hi Luke there are some notify Messages

 

i had look fast over it and think there not all Servers found

 

any notify messages from the sat devices?

[Luke 42077]

ok yes

NOTIFY Device message received from 192.168.2.106:44511. Headers: HOST=239.255.255.250:1900,CACHE-CONTROL=max-age=1800,LOCATION=http://192.168.2.106:8080/desc.xml,NT=urn:ses-com:device:SatIPServer:1,NTS=ssdp:alive,SERVER=Linux/1.0 UPnP/1.1 IDL4K/1.0,USN=uuid:7eafb2be-8d9b-4263-b6fa-7a594390beea::urn:ses-com:device:SatIPServer:1,BOOTID.UPNP.ORG=778,CONFIGID.UPNP.ORG=0

[Luke 42077]

Hi Luke there are some notify Messages

 

i had look fast over it and think there not all Servers found

 

Since you're on windows, go to advanced -> set your automatic update level to dev. then once you have the latest dev build, let me know if you see the message i mentioned earlier.

[Guest Diefenthal]

with disabled dlna and dev build are all three found

 

2016-02-17 07:53:52.5533 Info IDeviceDiscovery: Creating SSDP listener on 192.168.2.104
2016-02-17 07:53:52.5703 Debug SsdpHandler: Sending unicast search request
2016-02-17 07:53:53.6663 Info HttpClient: HttpClientManager GET: http://emby.media/community/index.php?/blog/rss/1-media-browser-developers-blog
2016-02-17 07:53:53.6873 Debug PortMapper: Starting NAT discovery
2016-02-17 07:53:53.6943 Debug App: SAT IP found at http://192.168.2.103/octoserve/octonet.xml
2016-02-17 07:53:53.7553 Info LibraryMonitor: Watching directory C:\Users\Kay\AppData\Roaming\Emby-Server\root
2016-02-17 07:53:53.7553 Info LibraryMonitor: Watching directory C:\Users\Kay\AppData\Roaming\Emby-Server\data\camerauploads
2016-02-17 07:53:53.7553 Info LibraryMonitor: Watching directory C:\Users\Kay\AppData\Roaming\Emby-Server\data\collections
2016-02-17 07:53:53.7553 Info LibraryMonitor: Watching directory C:\Users\Kay\AppData\Roaming\Emby-Server\data\playlists
2016-02-17 07:53:53.7673 Debug SsdpHandler: Registered mount a43de1e735cf5594bd6b7b5e6e90044b at http://192.168.2.104:8096/dlna/a43de1e735cf5594bd6b7b5e6e90044b/description.xml
2016-02-17 07:53:54.0474 Debug App: SAT IP found at http://192.168.2.106:8080/desc.xml
2016-02-17 07:53:54.0474 Info HttpClient: HttpClientManager POST: http://www.mb3admin.com/admin/service/registration/validate
2016-02-17 07:53:54.0964 Debug App: SAT IP found at http://192.168.2.102:80/rootDescr
2016-02-17 07:53:54.0964 Debug App: SAT IP found at http://192.168.2.102:80/rootDescr
2016-02-17 07:53:54.7174 Debug App: SAT IP found at http://192.168.2.106:8080/desc.xml

Edited February 19, 2016 by Diefenthal

[Guest Diefenthal]

is the sat>ip implementation canceld stopped?

 

if yes let it me know

[Luke 42077]

No, not at all. But you said only 1-2% of devices support the m3u method?

[Guest Diefenthal]

ok and the other way (RTSP -> RTP/RTCP->M2TS) is to much work for you ?

 

i had no Problem with that if you answer that with yes

Edited March 5, 2016 by Diefenthal

[Luke 42077]

No, it's not too much work, I just don't really know where to get started.

[Guest Diefenthal]

No, it's not too much work, I just don't really know where to get started.

 

device discovery had you  working

the next step  is look for Tuning data  as exsample from kingofsat the ini files for an ini Reader look there http://www.mentalis.org/soft/class.qpx?id=6

with that can you make an channelscan 

for that is an rtsp rtp rtcp stack needed

 

or would you parse first an ts file ?

 

https://onedrive.live.com/redir?resid=623CC1224D4C982B!862&authkey=!ACF5qhBI2I9Bdbs&ithint=video%2cts

Edited March 5, 2016 by Diefenthal

[Guest Diefenthal]

i had an dummy app for you

 

form1 is the device discovery

form2 the  configuration (Basic )  for the device

you can choose the Satellite  for each source

you can send rtsp Messages Setup Play Describe Options Teardown

 

and hope it helps you a Little bit

 

 

 

 

Edited March 6, 2016 by Diefenthal

[Guest Diefenthal]

here is an updated Version

 

 

changes

 

the 3 progressbars now Show the values for Signal Level Quality and Result  how manys Transponders are tuned

 

 

 

 

but here is no ! recieving of rtp / rtcp or Transport stream reading included it should only Show how emby communicate with sat>ip servern  to get channels  

 

if anyone wont help can i add this sample to github for Team work

Edited March 7, 2016 by Diefenthal

[Luke 42077]

Just getting started with an empty config page.

 

We can already support SAT servers that broadcast m3u in their device xml, but i guess not many do that.

 

[Nikolaech 32]

You want to make support for BDA devices? https://en.wikipedia.org/wiki/Broadcast_Driver_Architecture

or Sat-IP devices? http://www.satip.info/products/SAT%3EIP%20Servers

thank you

[Guest Diefenthal]

_{SatIp is it at time}

_{but is BDA tuner Support on the list than is it possible to create  it for both}

 

_{the only difference between BDA and SatIp  is that BDA use Filtergraphes  to tune and get the Data}

_{and SatIp use Rtsp Rtp  and parse the Byte data}

 

 

_{with other words we can now create casses called DVBSTuner, DVBTTuner and DVBCTuner and can specify over the type BDA or SatIP how the channel should be tuned and the data should be received}

[pir8radio 1312]

Just getting started with an empty config page.

 

We can already support SAT servers that broadcast m3u in their device xml, but i guess not many do that.

 

 

Sweet, ill look into sat-ip devices and play around!

[Nikolaech 32]

Yes, the first step is done.  Good luck to you!

[Guest Diefenthal]

i see that here some use dvb Viewers Recording Service as satip Server 

 

is there one with dvbt or dvbc

if yes can i implement that  but i cant that test

[Nikolaech 32]

 

 

i see that here some use dvb Viewers Recording Service as satip Server

Yes, there are many such. I use DVB-S/S2.

 

 

if yes can i implement that  but i cant that test

I can test. Hardware SkyStar 2 eXpress HD; software Win 10 x64 ru. DVBViewer 5.6.0 + RegService 1.32.0

[e123enitan 275]

Yes, the first step is done.  Good luck to you!

I can't review these pix's 

[Guest Diefenthal]

I can't review these pix's 

 in emby is it an dev build

 

the Form1 and Form2  is from my dummy that i attached  some Posts over this  zip Name is Satipv3

[Nikolaech 32]

EmbyServer-beta. RS 1.32.0(service record DVBViewer ) should be started. Should be the second picture.

Edited March 16, 2016 by Nikolaech

[e123enitan 275]

Kudos to the guys currently working on this project to it make a reality, I strongly believe this would be a selling feature for emby, that said, I hope soon DVB Viewer/RS would integrate with emby server.

 

Cheers!!

Edited March 16, 2016 by e123enitan

[Luke 42077]

Does anyone have a device that supports m3u channels via X_SATIPM3U?

[rechner123 12]

i see that here some use dvb Viewers Recording Service as satip Server 

 

is there one with dvbt or dvbc

if yes can i implement that  but i cant that test

Hi

 

I use recording service with dvb-c.

 

What can i do?

[Nikolaech 32]

Does anyone have a device that supports m3u channels via X_SATIPM3U?

as a client?  any computer with Windows

Edited March 17, 2016 by Nikolaech