Emby Theater v3.0.20 (Server v4.9.3.0) Homescreen Horiz. navigation broken

[Luke 42157]

13 hours ago, scottpro said:

Just tested the following with fresh installs.

• Version 4.9.3.18 - Scroll arrows work correctly with all sections.
• Version 4.9.3.19 - Scroll arrows work correctly with all sections.
• Version 4.9.3.20 - Scroll arrows only work with "My Media" as the section type (1-7).  All other sections types fail to scroll.
• Version 4.9.3.21 - Scroll arrows only work with "My Media" as the section type (1-7).  All other sections types fail to scroll.

*Note: I have to make the Emby window small to make the "My Media" arrows appear.  "My Media" contains 4 items, Movies, Original Movies, Collections and Concerts.

how are you testing these versions?

[scottpro 13]

19 minutes ago, Luke said:

how are you testing these versions?

I'm running a local proxy and snapshotting each version.

[d00zah 151]

Thanks for narrowing things down @scottproI've tried an uninstall/reinstall & see no behavioral improvement... any update, @Luke?

[step55 9]

Emby Theater has basically been unusable for the past week. The workarounds are onerous, and the devs have essentially been silent. 

As a user it would be nice to have some certainty that if I don't update anything on my end then I should be somewhat protected from breaking changes being pushed through from the backend. Or at the very least, some kind of quick resolution when problems are highlighted.

Could you please provide an update as to when or if the horizontal navigation issue will be resolved for the legacy version of Theater?

[Luke 42157]

57 minutes ago, step55 said:

Emby Theater has basically been unusable for the past week. The workarounds are onerous, and the devs have essentially been silent. 

As a user it would be nice to have some certainty that if I don't update anything on my end then I should be somewhat protected from breaking changes being pushed through from the backend. Or at the very least, some kind of quick resolution when problems are highlighted.

Could you please provide an update as to when or if the horizontal navigation issue will be resolved for the legacy version of Theater?

Hi there, can you please describe your issue in more detail? Thanks.

[d00zah 151]

This topic involves Emby Theater v3.0.20 (Server v4.9.3.0) specifically. While I originally mentioned all fields on the Home Screen... Latest...', 'On Now',, 'Continue Watching', I have since found it extends to 'Artist' / 'Album Artist' album lists... pretty much anywhere horizontal scrolling is required. It doesn't. Across multiple Win 11 clients.

@scottprodetermined what changes introduced the problem & it appears to affect other clients similarly.

As there are changes in the beta server related to such functionality, I suspect accommodating them may have affected those of us running the stable server release? 

[step55 9]

As others have said - the left/right navigation arrows (that appear when "Enable TV display mode" is disabled) don't respond to mouse clicks, which makes convenient navigation impossible.

I'm using Theater version 3.0.20, and an older server version - 4.8.11.0

[Luke 42157]

19 hours ago, step55 said:

As others have said - the left/right navigation arrows (that appear when "Enable TV display mode" is disabled) don't respond to mouse clicks, which makes convenient navigation impossible.

I'm using Theater version 3.0.20, and an older server version - 4.8.11.0

Mouse clicks where? Can you please show a screenshot example? Thanks.

[step55 9]

@d00zahalready provided a screenshot earlier in the thread - here: 

https://emby.media/community/topic/146671-emby-theater-v3020-server-v4930-homescreen-horiz-navigation-broken/#findComment-1510703

 

[Luke 42157]

Can you try a fresh install of the app as it seems to be working in my testing. Thanks.

[step55 9]

A fresh install shows the same issue.

Interestingly the navigation buttons work properly if I access the affected pc via rdp from a different pc on my network. This might point towards a solution?

I've also just tried installing on a different Windows 11 pc, and the problem doesn't show up. But that's no help for my Emby HTPC. The affected pc is Windows 10, UHD 605 graphics, latest drivers.

[Luke 42157]

5 hours ago, step55 said:

A fresh install shows the same issue.

Interestingly the navigation buttons work properly if I access the affected pc via rdp from a different pc on my network. This might point towards a solution?

I've also just tried installing on a different Windows 11 pc, and the problem doesn't show up. But that's no help for my Emby HTPC. The affected pc is Windows 10, UHD 605 graphics, latest drivers.

How exactly did you do a fresh install?

[step55 9]

I downloaded this:
https://github.com/MediaBrowser/emby-theater-windows/releases/download/3.0.20/emby-theater-x64.zip

Then unzipped to a new folder and ran Emby.Theater.exe

[scottpro 13]

5 hours ago, step55 said:

Interestingly the navigation buttons work properly if I access the affected pc via rdp from a different pc on my network. This might point towards a solution?

I can confirm that clicking the mouse on the horizontal scroll arrows does work when connected to the target PC using a RDP session.  When clicking on the scroll arrows locally on the target PC does not work.  The arrow does grow in size when the mouse is hovering the arrow but does not respond to mouse clicks.

• Windows 10 PC (RDP) -> Windows 11 PC (running ET 3.0.20), arrows work with mouse clicks
• Local Windows 10 or 11 PC (running ET 3.0.20), arrows do not respond to mouse clicks (no scroll)

Using latest 4.9.3.21

[Symen_4ab 3]

A friend reported the exact same issue on my server today.
Client Emby Theater 3.0.20, server 4.9.3.0

She's using the keyboard arrows for now.

[d00zah 151]

19 hours ago, step55 said:

A fresh install shows the same issue.

Interestingly the navigation buttons work properly if I access the affected pc via rdp from a different pc on my network. This might point towards a solution?

I've also just tried installing on a different Windows 11 pc, and the problem doesn't show up. But that's no help for my Emby HTPC. The affected pc is Windows 10, UHD 605 graphics, latest drivers.

RDP mitigates the problem here, as well.... but should not be considered a solution.

[Symen_4ab 3]

3 hours ago, d00zah said:

RDP mitigates the problem here, as well.... but should not be considered a solution.

Yeah, I think the "using the keyboard arrows" is a better workaround than using rdp 
Just did the test, I can confirm this issue using emby theater 3.0.20 on my local server running 4.9.3.0. (same issue connecting to the beta 4.10.0.5 server, this is of course a client issue)

Edited Friday at 09:51 PM by Symen_4ab
typo

[Symen_4ab 3]

FYI, I managed to fix this by cloning the https://github.com/MediaBrowser/emby-theater-windows/ repo, building the solution, and replacing the content of %appdata%\Emby-Theater\system\x64\electron with the freshly built one.

Don't forget to make a backup of your files if you want to try this.

[scottpro 13]

7 hours ago, Symen_4ab said:

FYI, I managed to fix this by cloning the https://github.com/MediaBrowser/emby-theater-windows/ repo, building the solution, and replacing the content of %appdata%\Emby-Theater\system\x64\electron with the freshly built one.

Don't forget to make a backup of your files if you want to try this.

That repository uses Electron 8.5.2.0 which is really old.  The version that is packaged in the deployment, "emby-theater-x64.zip", uses Electron 11.5.0.0.

https://github.com/MediaBrowser/emby-theater-windows/releases

So it may be working with an old version of Electron, but not the latest one.  I also tried using version 3.0.20 and 3.0.21 and they both experience the issue.  Both use Electron 11.5.0.0.

FYI, ET version 3.0.21 was pulled a while back because the mpv-1.dll was not working correctly.  I have ET version 3.0.21  backed up and replaced the broken mpv-1.dll and it works fine.

[Mahinepua 82]

What’s the difference between 3.0.20 and .21?

[scottpro 13]

25 minutes ago, Mahinepua said:

What’s the difference between 3.0.20 and .21?

0.0.01 ... lol

Not sure, probably just an update to mpv-1.dll.  You'll have to ask Luke for details.

[Mahinepua 82]

Yes that’s what I understand the only change was too.