Erik 124 Posted October 22, 2014 Posted October 22, 2014 Just a heads up for uses windows server 2012.... I upgraded my hardware and while doing a clean install of the OS I discovered a lot of drivers were not installed. So I went about downloading them and still they wouldn't install. Found out after a little googling that the new Intel 8 series boards have an internal marker that indicates its a consumer piece of hardware (not server grade) and will not recognize the devices. Trying to force Server OSs into Server Hardware I guess. For me it was the LAN, Chipset and audio. There are a few hacks out there to make some devices work, but mixed results from what I read.
Tharnax 49 Posted October 29, 2014 Posted October 29, 2014 I've run into this with Windows Home Server 2011 as well. It's really frustrating when you pick up a nice new motherboard/processor/ram to upgrade your server and then attempt to install WHS 2011 on in, a "consumer" product. Then you can't install network drivers because these drivers can only be installed on with a non-Windows Server OS. Really!!!??? I think that's why I hear a lot of people moving to Windows 8 server, it has some limitation but has storage spaces so for the most part works for individuals home server us. Personally I like the auto back-up that comes with WHS and have had to use it plenty of times.
Erik 124 Posted October 29, 2014 Author Posted October 29, 2014 Yes, very aggravating! to say the least. After several days of attempts...I found that the latest drivers for my motherboard from ASUS all work EXCEPT for the LAN chip. That seems to be the biggest stumbling block, so I went and bought a new PCIE Ethernet card instead and now its all up and running on server 2012 R2.
gthrift 64 Posted October 29, 2014 Posted October 29, 2014 (edited) Anyone tried this? http://hardforum.com/showthread.php?t=1772066 I've been looking at upgrading my HP N40L to a lower power 35w i3 build. I was thinking it would be quieter, cooler, and more powerful but this is a roadblock I wasn't expecting. edit: I used the method here and worked without issue on an Asus H97i-Plus motherboard with intel 1218-v and Windows Server 2012 Essentials R2. Edited November 5, 2014 by gthrift
Erik 124 Posted October 29, 2014 Author Posted October 29, 2014 I did read about it, but the sites that showed how for the 1218-V that I was dealing with said the results were not %100 for some. So I went the safe route for now as its the family server.
gthrift 64 Posted October 29, 2014 Posted October 29, 2014 (edited) I did read about it, but the sites that showed how for the 1218-V that I was dealing with said the results were not %100 for some. So I went the safe route for now as its the family server. There is also this you could try. See intel nic section - http://assassinhtpcblog.com/server-whs-2011/#guide005%C2%A0 or check the comments here - http://nearlydeaf.com/?p=1145. I'm interested to see if this works, as the board I want also has the 1218-v. edit: I used the method here and worked without issue on an Asus H97i-Plus motherboard with intel 1218-v and Windows Server 2012 Essentials R2. Edited November 5, 2014 by gthrift 1
Erik 124 Posted October 29, 2014 Author Posted October 29, 2014 I'll read that closer, thanks. But Intel has made it so it doesn't even come up as unsigned...just says no driver available even when I point it to where I know it is...have to modify the driver details like in your first post I believe.
gthrift 64 Posted October 29, 2014 Posted October 29, 2014 (edited) One last one, Erik - http://nerdanswer.com/answer.php?q=731179 This last link looks a a little more straight forward and does not require editing the .ini file. Edited October 29, 2014 by gthrift
Erik 124 Posted October 29, 2014 Author Posted October 29, 2014 Thanks @@gthrift, I'll try that later tonight and post the results.
gthrift 64 Posted November 5, 2014 Posted November 5, 2014 Thanks @@gthrift, I'll try that later tonight and post the results. One last one, Erik - http://nerdanswer.com/answer.php?q=731179 This last link looks a a little more straight forward and does not require editing the .ini file. @@Erik and anyone else with an Intel chipset, I don't know if you've tried this yet or not, but I installed Server 2012 Essentials R2 on my new server with an Asus h97i-plus motherboard with 1218-V. I followed the instructions I linked above and it worked without issue. 1
Erik 124 Posted November 5, 2014 Author Posted November 5, 2014 Thanks @@gthrift for verifying! I haven't had a chance to give it a try yet. But sounds like it should fix mine as well. Erik
Erik 124 Posted November 8, 2014 Author Posted November 8, 2014 (edited) Worked like a charm! Thanks again @@gthrift Edited November 8, 2014 by Erik 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now