F4-423 N5095无法开启核显转码

[louischel 0]

昨天新购买的 铁威马F4-423  

安装了emby  4.7.5.0  和beta版本4.8.0.8版本 

开启了高级转码 无法识别到有效的硬件

于是我就用ssh命令

去输入了ls  cd/dev/dri

命令反馈 by-path card0

所以导致无法硬件转码

播放一个视频自动转码时候 

CPU占用率百分之100 

两分钟后就导致TOS奔溃

[Luke 42077]

@louischel

HI there, please attach the emby server log, ffmpeg log example and hardware detection log files:

Thanks.

[ManelN7 0]

Es el mismo problema. No detecta o no tiene permisos para acceder

 

[Luke 42077]

On 11/30/2022 at 9:46 AM, ManelN7 said:

Es el mismo problema. No detecta o no tiene permisos para acceder

 

@ManelN7

HI there, please attach the emby server log, ffmpeg log example and hardware detection log files:

Thanks.

[ManelN 0]

2 hours ago, Luke said:

@ManelN7

HI there, please attach the emby server log, ffmpeg log example and hardware detection log files:

Thanks.

Hola! He devuelto el F4 423. Al parecer el kernel de TOS 5.0 no es compatible. Necesita TOS 5.1 y no saben cuando estará disponible.

 

Gracias

[Luke 42077]

@ManelN7 have you installed TOS 5.1?

[outkastm 8]

Hi @Luke, nice to see you back (from previous Thecus discussions)

Struggling to make the hardware transcoding working on the new F4-423 NAS with JasperLake

Here atached the logs, if something else is needed please let me know.

FYI, I've managed to adapt the kernel parameter i915.enable_guc=2 which i understood is a prerequest for n5095 CPU but i could't make the kernel to load the firmware files (if needed)

  0.082310] Setting dangerous option i915.enable_guc - tainting kernel
[    0.703167] i915 0000:00:02.0: vgaarb: deactivate vga console
[    0.704194] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    0.873298] i915 0000:00:02.0: Direct firmware load for i915/icl_dmc_ver1_09.bin failed with error -2
[    0.873309] i915 0000:00:02.0: [drm] Failed to load DMC firmware i915/icl_dmc_ver1_09.bin. Disabling runtime power management.
[    0.873313] i915 0000:00:02.0: [drm] DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915
[    0.873322] i915 0000:00:02.0: Direct firmware load for i915/ehl_guc_62.0.0.bin failed with error -2
[    0.873326] i915 0000:00:02.0: [drm] GuC firmware i915/ehl_guc_62.0.0.bin: fetch failed with error -2
[    0.873329] i915 0000:00:02.0: [drm] GuC firmware(s) can be downloaded from https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915
[    0.873960] i915 0000:00:02.0: [drm] GuC is uninitialized
[    0.889558] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[    0.969265] fbcon: i915drmfb (fb0) is primary device
[    1.145641] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

/sys/module/i915/parameters/disable_display:N
/sys/module/i915/parameters/disable_power_well:-1
/sys/module/i915/parameters/dmc_firmware_path:(null)
/sys/module/i915/parameters/edp_vswing:0
/sys/module/i915/parameters/enable_dc:-1
/sys/module/i915/parameters/enable_dp_mst:Y
/sys/module/i915/parameters/enable_dpcd_backlight:-1
/sys/module/i915/parameters/enable_fbc:-1
/sys/module/i915/parameters/enable_guc:2
/sys/module/i915/parameters/enable_gvt:N
/sys/module/i915/parameters/enable_hangcheck:Y
/sys/module/i915/parameters/enable_ips:1
/sys/module/i915/parameters/enable_psr:-1
/sys/module/i915/parameters/enable_psr2_sel_fetch:N
/sys/module/i915/parameters/error_capture:Y
/sys/module/i915/parameters/fastboot:-1
/sys/module/i915/parameters/force_probe:
/sys/module/i915/parameters/force_reset_modeset_test:N
/sys/module/i915/parameters/guc_firmware_path:(null)
/sys/module/i915/parameters/guc_log_level:-1
/sys/module/i915/parameters/huc_firmware_path:(null)
/sys/module/i915/parameters/invert_brightness:0
/sys/module/i915/parameters/load_detect_test:N
/sys/module/i915/parameters/lvds_channel_mode:0
/sys/module/i915/parameters/mitigations:auto
/sys/module/i915/parameters/mmio_debug:0
/sys/module/i915/parameters/modeset:-1
/sys/module/i915/parameters/nuclear_pageflip:N
/sys/module/i915/parameters/panel_use_ssc:-1
/sys/module/i915/parameters/psr_safest_params:N
/sys/module/i915/parameters/request_timeout_ms:20000
/sys/module/i915/parameters/reset:3
/sys/module/i915/parameters/vbt_firmware:(null)
/sys/module/i915/parameters/vbt_sdvo_panel_type:-1
/sys/module/i915/parameters/verbose_state_checks:Y

 

embyserver.txt ffmpeg-transcode-3ef6a031-0442-40d5-a112-36a185603051_1.txt hardware_detection-63809582921.txt

Edited January 18, 2023 by outkastm

[Luke 42077]

43 minutes ago, outkastm said:

Hi @Luke, nice to see you back (from previous Thecus discussions)

Struggling to make the hardware transcoding working on the new F4-423 NAS with JasperLake

Here atached the logs, if something else is needed please let me know.

FYI, I've managed to adapt the kernel parameter i915.enable_guc=2 which i understood is a prerequest for n5095 CPU but i could't make the kernel to load the firmware files (if needed)

  0.082310] Setting dangerous option i915.enable_guc - tainting kernel
[    0.703167] i915 0000:00:02.0: vgaarb: deactivate vga console
[    0.704194] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    0.873298] i915 0000:00:02.0: Direct firmware load for i915/icl_dmc_ver1_09.bin failed with error -2
[    0.873309] i915 0000:00:02.0: [drm] Failed to load DMC firmware i915/icl_dmc_ver1_09.bin. Disabling runtime power management.
[    0.873313] i915 0000:00:02.0: [drm] DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915
[    0.873322] i915 0000:00:02.0: Direct firmware load for i915/ehl_guc_62.0.0.bin failed with error -2
[    0.873326] i915 0000:00:02.0: [drm] GuC firmware i915/ehl_guc_62.0.0.bin: fetch failed with error -2
[    0.873329] i915 0000:00:02.0: [drm] GuC firmware(s) can be downloaded from https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915
[    0.873960] i915 0000:00:02.0: [drm] GuC is uninitialized
[    0.889558] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[    0.969265] fbcon: i915drmfb (fb0) is primary device
[    1.145641] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

# grep -H '' /sys/module/i915/parameters/*
/sys/module/i915/parameters/disable_display:N
/sys/module/i915/parameters/disable_power_well:-1
/sys/module/i915/parameters/dmc_firmware_path:(null)
/sys/module/i915/parameters/edp_vswing:0
/sys/module/i915/parameters/enable_dc:-1
/sys/module/i915/parameters/enable_dp_mst:Y
/sys/module/i915/parameters/enable_dpcd_backlight:-1
/sys/module/i915/parameters/enable_fbc:-1
/sys/module/i915/parameters/enable_guc:2
/sys/module/i915/parameters/enable_gvt:N
/sys/module/i915/parameters/enable_hangcheck:Y
/sys/module/i915/parameters/enable_ips:1
/sys/module/i915/parameters/enable_psr:-1
/sys/module/i915/parameters/enable_psr2_sel_fetch:N
/sys/module/i915/parameters/error_capture:Y
/sys/module/i915/parameters/fastboot:-1
/sys/module/i915/parameters/force_probe:
/sys/module/i915/parameters/force_reset_modeset_test:N
/sys/module/i915/parameters/guc_firmware_path:(null)
/sys/module/i915/parameters/guc_log_level:-1
/sys/module/i915/parameters/huc_firmware_path:(null)
/sys/module/i915/parameters/invert_brightness:0
/sys/module/i915/parameters/load_detect_test:N
/sys/module/i915/parameters/lvds_channel_mode:0
/sys/module/i915/parameters/mitigations:auto
/sys/module/i915/parameters/mmio_debug:0
/sys/module/i915/parameters/modeset:-1
/sys/module/i915/parameters/nuclear_pageflip:N
/sys/module/i915/parameters/panel_use_ssc:-1
/sys/module/i915/parameters/psr_safest_params:N
/sys/module/i915/parameters/request_timeout_ms:20000
/sys/module/i915/parameters/reset:3
/sys/module/i915/parameters/vbt_firmware:(null)
/sys/module/i915/parameters/vbt_sdvo_panel_type:-1
/sys/module/i915/parameters/verbose_state_checks:Y

 

embyserver.txt 101.18 kB · 0 downloads ffmpeg-transcode-3ef6a031-0442-40d5-a112-36a185603051_1.txt 123.83 kB · 0 downloads hardware_detection-63809582921.txt 247.45 kB · 0 downloads

Can you try the 4.8 beta channel and see how that compares?

[outkastm 8]

no change, still falling back to software transcoding

ffmpeg-transcode-80296ae7-2749-4958-b108-d596735cd80c_1.txt hardware_detection-63809593615.txt

embyserver.txt

Edited January 17, 2023 by outkastm

[outkastm 8]

Still no update or are you looking into this? 

[outkastm 8]

Still no update? 

[Luke 42077]

Please try again with the next beta build as there will be an Intel OneVPL update. Thanks.

[outkastm 8]

latest beta fail to start

Change the line below inside the start script /usr/local/emby/emby-server/bin/emby-server from 

APP_DATA_DIR=$(ter_share_add -name "Emby")

to

APP_DATA_DIR=$(ter_share_add -name "Emby" -owner emby)

 

[outkastm 8]

and still no hw transcoding

hardware_detection-63815817284.txt embyserver.txt ffmpeg-transcode-e3dc8580-2ee7-452a-98ea-ed2fede931f0_1.txt

[Luke 42077]

@outkastm can you try 4.8.0.29 and let us know how that compares? Thanks !