KTBBQQ 0 Posted September 4, 2021 Posted September 4, 2021 HW: hp gen10 plus NVIDIA GT720 System:Truenas scale 21.08 B1 UID:1000 GID:1000 GIDLIST:44,107 video:x:44: render:x:107: truenas# ls -l /dev/dri total 0 drwxr-xr-x 2 root root 100 Sep 4 23:13 by-path crw-rw---- 1 root video 226, 0 Sep 4 23:13 card0 crw-rw---- 1 root video 226, 1 Sep 4 23:13 card1 crw-rw---- 1 root render 226, 128 Sep 4 23:13 renderD128 "DeviceInfo": { "VendorName": "NVIDIA Corporation", "DeviceName": "GK208B [GeForce GT 720]", "SubsytemVendorName": "PC Partner Limited / Sapphire Technology", "VendorId": 4318, "DeviceId": 4744, "SubsytemVendorId": 5963, "SubsytemDeviceId": 12907, "DevPath": "/sys/bus/pci/devices/0000:07:00.0", "DrmCard": "/dev/dri/card1", "DrmRender": "/dev/dri/renderD128", "IsEnabled": 1, "IsBootVga": 0, "Error": { "Number": -1, "Message": "Failed to initialize VA /dev/dri/renderD128. Error -1" } } } ], "Log": [ { "Level": 40, "Category": 0, "Message": "Found 26 device entries" English not well,who can help me ?
Q-Droid 989 Posted September 4, 2021 Posted September 4, 2021 Docker compose: devices: - /dev/dri:/dev/dri # VAAPI/NVDEC/NVENC render nodes https://hub.docker.com/r/emby/embyserver
KTBBQQ 0 Posted September 4, 2021 Author Posted September 4, 2021 Thank you answer，use this command try it。 docker run -d \ -v /mnt/Data/media/emby/config:/config \ -v /mnt/Data/media/movie:/mnt/move \ --device /dev/dri:/dev/dri \ --network=host -p 8096:8096 \ -p 8920:8920 \ -e UID=1000 \ -e GID=1000 \ -e GIDLIST=44,107 \ emby/embyserver:latest
Luke 42077 Posted September 5, 2021 Posted September 5, 2021 13 hours ago, KTBBQQ said: @LukeThank you，try and report Let us know how you get on. Thanks.
KTBBQQ 0 Posted September 6, 2021 Author Posted September 6, 2021 hello everybody，today iam try re-install truenas scale 21.08 b1 and install emby in it，but 。。。。 test1: truenas# docker container create \ --name="emby-server" \ --network="host" \ --volume /mnt/Data/media/emby/config:/config \ --volume /mnt/Data/media/movie:/mnt/move \ --device /dev/dri:/dev/dri \ --runtime=nvidia \ --publish 8096:8096 \ --publish 8920:8920 \ --env UID=0 \ --env GID=0 \ --env GIDLIST=0 \ --env NVIDIA_VISIBLE_DEVICES=all \ --env NVIDIA_DRIVER_CAPABILITIES=compute,utility,video \ emby/embyserver:latest result： truenas# docker exec -it emby-server /bin/ffdetect -hide_banner -show_program_version -loglevel 48 -show_error -show_log 40 vaencdec -print_format json ffdetect version 4.3.0-emby_2021_02_27 Copyright (c) 2018-2021 softworkz for Emby LLC built with gcc 8.3.0 (crosstool-NG 1.24.0) configuration: --cc=x86_64-emby-linux-gnu-gcc --prefix=/home/embybuilder/Buildbot/x64/ffmpeg-x64/staging --disable-debug --disable-doc --disable-ffplay --disable-vdpau --disable-xlib --enable-chromaprint --enable-fontconfig --enable-gnutls --enable-gpl --enable-iconv --enable-libass --enable-libdav1d --enable-libfreetype --enable-libfribidi --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libzvbi --enable-pic --enable-version3 --enable-libx265 --enable-cuda-llvm --enable-cuvid --enable-libmfx --enable-nvdec --enable-nvenc --enable-vaapi --enable-opencl --enable-cross-compile --cross-prefix=x86_64-emby-linux-gnu- --arch=x86_64 --target-os=linux --enable-shared --disable-static --pkg-config=pkg-config --pkg-config-flags=--static --extra-libs='-lm -lstdc++ -pthread' libavutil 56. 36.100 / 56. 36.100 { "ProgramVersion": { "Version": "4.3.0-emby_2021_02_27", "Copyright": "Copyright (c) 2018-2021 softworkz for Emby Llc", "Compiler": "gcc 8.3.0 (crosstool-NG 1.24.0)", "Configuration": "--cc=x86_64-emby-linux-gnu-gcc --prefix=/home/embybuilder/Buildbot/x64/ffmpeg-x64/staging --disable-debug --disable-doc --disable-ffplay --disable-vdpau --disable-xlib --enable-chromaprint --enable-fontconfig --enable-gnutls --enable-gpl --enable-iconv --enable-libass --enable-libdav1d --enable-libfreetype --enable-libfribidi --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libzvbi --enable-pic --enable-version3 --enable-libx265 --enable-cuda-llvm --enable-cuvid --enable-libmfx --enable-nvdec --enable-nvenc --enable-vaapi --enable-opencl --enable-cross-compile --cross-prefix=x86_64-emby-linux-gnu- --arch=x86_64 --target-os=linux --enable-shared --disable-static --pkg-config=pkg-config --pkg-config-flags=--static --extra-libs='-lm -lstdc++ -pthread'" }, "Devices": [ Begin GetVaAdapterInfo Found 26 device entries Begin get_nodes Found 2 drm entries Begin get_nodes Found 2 drm entries End GetVaAdapterInfo { "DeviceIndex": 0, "DeviceInfo": { "VendorName": "Matrox Electronics Systems Ltd.", "DeviceName": "MGA G200eH3", "SubsytemVendorName": "Hewlett Packard Enterprise", "SubsytemDeviceName": "iLO5 VGA", "VendorId": 4139, "DeviceId": 1336, "SubsytemVendorId": 5520, "SubsytemDeviceId": 228, "DevPath": "/sys/bus/pci/devices/0000:01:00.1", "DrmCard": "/dev/dri/card0", "IsEnabled": 1, "IsBootVga": 1, "Error": { "Number": -1, "Message": "Failed to open the drm device (null)" } } }, { "DeviceIndex": 1, "DeviceInfo": { "VendorName": "NVIDIA Corporation", "DeviceName": "GK208B [GeForce GT 720]", "SubsytemVendorName": "PC Partner Limited / Sapphire Technology", "VendorId": 4318, "DeviceId": 4744, "SubsytemVendorId": 5963, "SubsytemDeviceId": 12907, "DevPath": "/sys/bus/pci/devices/0000:07:00.0", "DrmCard": "/dev/dri/card1", "DrmRender": "/dev/dri/renderD128", "IsEnabled": 1, "IsBootVga": 0, "Error": { "Number": -1, "Message": "Failed to initialize VA /dev/dri/renderD128. Error -1" } } } ], "Log": [ { "Level": 40, "Category": 0, "Message": "Found 26 device entries" } ] } truenas# docker exec -it emby-server ls -l /dev/dri total 0 crw-rw---- 1 root 44 226, 0 Sep 6 17:40 card0 crw-rw---- 1 root 44 226, 1 Sep 6 17:40 card1 crw-rw---- 1 root 107 226, 128 Sep 6 17:40 renderD128 truenas# docker exec -it emby-server ls -ld /dev/dri drwxr-xr-x 2 root root 100 Sep 6 17:40 /dev/dri test2: docker container create \ --name="emby-server" \ --network="host" \ --volume /mnt/Data/media/emby/config:/config \ --volume /mnt/Data/media/movie:/mnt/move \ --device /dev/dri:/dev/dri \ --runtime=nvidia \ --publish 8096:8096 \ --publish 8920:8920 \ --env UID=0 \ --env GID=0 \ --env GIDLIST=0 \ --gpus all emby/embyserver:latest result： truenas# docker exec -it emby-server /bin/ffdetect -hide_banner -show_program_version -loglevel 48 -show_error -show_log 40 vaencdec -print_format json ffdetect version 4.3.0-emby_2021_02_27 Copyright (c) 2018-2021 softworkz for Emby LLC built with gcc 8.3.0 (crosstool-NG 1.24.0) configuration: --cc=x86_64-emby-linux-gnu-gcc --prefix=/home/embybuilder/Buildbot/x64/ffmpeg-x64/staging --disable-debug --disable-doc --disable-ffplay --disable-vdpau --disable-xlib --enable-chromaprint --enable-fontconfig --enable-gnutls --enable-gpl --enable-iconv --enable-libass --enable-libdav1d --enable-libfreetype --enable-libfribidi --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libzvbi --enable-pic --enable-version3 --enable-libx265 --enable-cuda-llvm --enable-cuvid --enable-libmfx --enable-nvdec --enable-nvenc --enable-vaapi --enable-opencl --enable-cross-compile --cross-prefix=x86_64-emby-linux-gnu- --arch=x86_64 --target-os=linux --enable-shared --disable-static --pkg-config=pkg-config --pkg-config-flags=--static --extra-libs='-lm -lstdc++ -pthread' libavutil 56. 36.100 / 56. 36.100 { "ProgramVersion": { "Version": "4.3.0-emby_2021_02_27", "Copyright": "Copyright (c) 2018-2021 softworkz for Emby Llc", "Compiler": "gcc 8.3.0 (crosstool-NG 1.24.0)", "Configuration": "--cc=x86_64-emby-linux-gnu-gcc --prefix=/home/embybuilder/Buildbot/x64/ffmpeg-x64/staging --disable-debug --disable-doc --disable-ffplay --disable-vdpau --disable-xlib --enable-chromaprint --enable-fontconfig --enable-gnutls --enable-gpl --enable-iconv --enable-libass --enable-libdav1d --enable-libfreetype --enable-libfribidi --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libzvbi --enable-pic --enable-version3 --enable-libx265 --enable-cuda-llvm --enable-cuvid --enable-libmfx --enable-nvdec --enable-nvenc --enable-vaapi --enable-opencl --enable-cross-compile --cross-prefix=x86_64-emby-linux-gnu- --arch=x86_64 --target-os=linux --enable-shared --disable-static --pkg-config=pkg-config --pkg-config-flags=--static --extra-libs='-lm -lstdc++ -pthread'" }, "Devices": [ Begin GetVaAdapterInfo Found 26 device entries Begin get_nodes Found 2 drm entries Begin get_nodes Found 2 drm entries End GetVaAdapterInfo { "DeviceIndex": 0, "DeviceInfo": { "VendorName": "Matrox Electronics Systems Ltd.", "DeviceName": "MGA G200eH3", "SubsytemVendorName": "Hewlett Packard Enterprise", "SubsytemDeviceName": "iLO5 VGA", "VendorId": 4139, "DeviceId": 1336, "SubsytemVendorId": 5520, "SubsytemDeviceId": 228, "DevPath": "/sys/bus/pci/devices/0000:01:00.1", "DrmCard": "/dev/dri/card0", "IsEnabled": 1, "IsBootVga": 1, "Error": { "Number": -1, "Message": "Failed to open the drm device (null)" } } }, { "DeviceIndex": 1, "DeviceInfo": { "VendorName": "NVIDIA Corporation", "DeviceName": "GK208B [GeForce GT 720]", "SubsytemVendorName": "PC Partner Limited / Sapphire Technology", "VendorId": 4318, "DeviceId": 4744, "SubsytemVendorId": 5963, "SubsytemDeviceId": 12907, "DevPath": "/sys/bus/pci/devices/0000:07:00.0", "DrmCard": "/dev/dri/card1", "DrmRender": "/dev/dri/renderD128", "IsEnabled": 1, "IsBootVga": 0, "Error": { "Number": -1, "Message": "Failed to initialize VA /dev/dri/renderD128. Error -1" } } } ], "Log": [ { "Level": 40, "Category": 0, "Message": "Found 26 device entries" } ] } truenas# ls -ld /dev/dri drwxr-xr-x 3 root root 120 Sep 7 01:04 /dev/dri truenas# ls -l /dev/dri total 0 drwxr-xr-x 2 root root 100 Sep 7 01:04 by-path crw-rw---- 1 root video 226, 0 Sep 7 01:04 card0 crw-rw---- 1 root video 226, 1 Sep 7 01:04 card1 crw-rw---- 1 root render 226, 128 Sep 7 01:04 renderD128 truenas# docker exec -it emby-server ls -l /dev/dri total 0 crw-rw---- 1 root 44 226, 0 Sep 6 17:52 card0 crw-rw---- 1 root 44 226, 1 Sep 6 17:52 card1 crw-rw---- 1 root 107 226, 128 Sep 6 17:52 renderD128 truenas# Still prompt：Failed to initialize VA /dev/dri/renderD128. Error -1 I have more information： truenas# nvidia-smi Tue Sep 7 02:04:59 2021 +-----------------------------------------------------------------------------+ | NVIDIA-SMI 460.91.03 Driver Version: 460.91.03 CUDA Version: 11.2 | |-------------------------------+----------------------+----------------------+ | GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC | | Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. | | | | MIG M. | |===============================+======================+======================| | 0 GeForce GT 720 Off | 00000000:07:00.0 N/A | N/A | | 40% 42C P8 N/A / N/A | 0MiB / 2002MiB | N/A Default | | | | N/A | +-------------------------------+----------------------+----------------------+ +-----------------------------------------------------------------------------+ | Processes: | | GPU GI CI PID Type Process name GPU Memory | | ID ID Usage | |=============================================================================| | No running processes found | +-----------------------------------------------------------------------------+ truenas# truenas# lspci 00:00.0 Host bridge: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers (rev 07) 00:01.0 PCI bridge: Intel Corporation 6th-10th Gen Core Processor PCIe Controller (x16) (rev 07) 00:12.0 Signal processing controller: Intel Corporation Cannon Lake PCH Thermal Controller (rev 10) 00:14.0 USB controller: Intel Corporation Cannon Lake PCH USB 3.1 xHCI Host Controller (rev 10) 00:14.2 RAM memory: Intel Corporation Cannon Lake PCH Shared SRAM (rev 10) 00:16.0 Communication controller: Intel Corporation Cannon Lake PCH HECI Controller (rev 10) 00:16.4 Communication controller: Intel Corporation Cannon Lake PCH HECI Controller #2 (rev 10) 00:17.0 SATA controller: Intel Corporation Cannon Lake PCH SATA AHCI Controller (rev 10) 00:1b.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #21 (rev f0) 00:1c.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #1 (rev f0) 00:1d.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #9 (rev f0) 00:1d.1 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #10 (rev f0) 00:1d.2 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #11 (rev f0) 00:1d.3 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #12 (rev f0) 00:1f.0 ISA bridge: Intel Corporation Device a30a (rev 10) 00:1f.5 Serial bus controller [0c80]: Intel Corporation Cannon Lake PCH SPI Controller (rev 10) 01:00.0 System peripheral: Hewlett-Packard Company Integrated Lights-Out Standard Slave Instrumentation & System Support (rev 07) 01:00.1 VGA compatible controller: Matrox Electronics Systems Ltd. MGA G200eH3 (rev 02) 01:00.2 System peripheral: Hewlett-Packard Company Integrated Lights-Out Standard Management Processor Support and Messaging (rev 07) 01:00.4 USB controller: Hewlett-Packard Company iLO5 Virtual USB Controller 02:00.0 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01) 02:00.1 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01) 02:00.2 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01) 02:00.3 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01) 07:00.0 VGA compatible controller: NVIDIA Corporation GK208B [GeForce GT 720] (rev a1) 07:00.1 Audio device: NVIDIA Corporation GK208 HDMI/DP Audio Controller (rev a1) truenas# lsmod Module Size Used by nfnetlink_log 20480 3 xt_limit 16384 3 xt_NFLOG 16384 3 xt_physdev 16384 6 xt_tcpudp 20480 3 macvlan 28672 0 veth 32768 0 nf_conntrack_netlink 57344 0 xt_multiport 20480 2 xt_addrtype 16384 5 ip_vs_rr 16384 4 dummy 16384 0 ipt_REJECT 16384 4 nf_reject_ipv4 16384 1 ipt_REJECT ip_set_hash_ipport 45056 1 xt_nat 16384 1 xt_ipvs 20480 1 ip_vs 180224 7 ip_vs_rr,xt_ipvs xt_set 16384 6 ip_set_hash_ip 45056 3 ip_set_hash_net 49152 1 ip_set 57344 4 ip_set_hash_ip,xt_set,ip_set_hash_net,ip_set_hash_ipport nfnetlink 16384 3 nf_conntrack_netlink,ip_set,nfnetlink_log nvidia_uvm 1015808 0 iptable_mangle 16384 1 ip6table_mangle 16384 1 ip6table_filter 16384 1 ip6table_nat 16384 1 ip6_tables 36864 3 ip6table_filter,ip6table_nat,ip6table_mangle xt_MASQUERADE 20480 3 xt_conntrack 16384 4 xt_comment 16384 72 iptable_filter 16384 1 xt_mark 16384 26 iptable_nat 16384 1 nf_nat 53248 4 ip6table_nat,xt_nat,iptable_nat,xt_MASQUERADE nf_conntrack 176128 6 xt_conntrack,nf_nat,xt_nat,nf_conntrack_netlink,xt_MASQUERADE,ip_vs nf_defrag_ipv6 24576 2 nf_conntrack,ip_vs nf_defrag_ipv4 16384 1 nf_conntrack br_netfilter 32768 0 bridge 253952 1 br_netfilter stp 16384 1 bridge llc 16384 2 bridge,stp overlay 143360 0 essiv 16384 2 authenc 16384 1 essiv dm_crypt 53248 2 binfmt_misc 24576 1 dm_mod 163840 5 dm_crypt nvidia_drm 53248 0 nvidia_modeset 1228800 1 nvidia_drm intel_rapl_msr 20480 0 nvidia 34160640 30 nvidia_uvm,nvidia_modeset intel_rapl_common 28672 1 intel_rapl_msr intel_pmc_core_pltdrv 16384 0 intel_pmc_core 45056 0 snd_hda_codec_hdmi 73728 1 snd_hda_intel 57344 0 snd_intel_dspcfg 28672 1 snd_hda_intel x86_pkg_temp_thermal 20480 0 soundwire_intel 45056 1 snd_intel_dspcfg soundwire_generic_allocation 16384 1 soundwire_intel intel_powerclamp 20480 0 snd_soc_core 315392 1 soundwire_intel coretemp 20480 0 kvm_intel 327680 0 snd_compress 32768 1 snd_soc_core soundwire_cadence 36864 1 soundwire_intel snd_hda_codec 172032 2 snd_hda_codec_hdmi,snd_hda_intel kvm 917504 1 kvm_intel snd_hda_core 110592 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec ipmi_ssif 40960 0 snd_hwdep 16384 1 snd_hda_codec irqbypass 16384 1 kvm soundwire_bus 90112 3 soundwire_intel,soundwire_generic_allocation,soundwire_cadence mgag200 36864 0 rapl 20480 0 snd_pcm 135168 7 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,soundwire_intel,snd_compress,snd_soc_core,snd_hda_core intel_cstate 20480 0 acpi_ipmi 20480 0 snd_timer 49152 1 snd_pcm intel_uncore 176128 0 hpwdt 20480 0 drm_kms_helper 274432 4 mgag200,nvidia_drm snd 110592 8 snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_timer,snd_compress,snd_soc_core,snd_pcm mei_me 45056 0 ipmi_si 73728 1 joydev 28672 0 evdev 28672 1 watchdog 28672 1 hpwdt soundcore 16384 1 snd hpilo 24576 0 cec 61440 1 drm_kms_helper ipmi_devintf 20480 0 sg 36864 0 mei 139264 1 mei_me intel_pch_thermal 16384 0 efi_pstore 16384 0 ie31200_edac 16384 0 pcspkr 16384 0 ipmi_msghandler 118784 4 ipmi_devintf,ipmi_si,acpi_ipmi,ipmi_ssif acpi_tad 20480 0 acpi_power_meter 20480 0 button 24576 0 drm 618496 4 drm_kms_helper,mgag200,nvidia_drm fuse 167936 1 configfs 57344 1 efivarfs 16384 1 ip_tables 32768 6 iptable_filter,iptable_nat,iptable_mangle x_tables 53248 20 ip6table_filter,xt_conntrack,iptable_filter,xt_multiport,xt_NFLOG,xt_tcpudp,xt_addrtype,xt_physdev,xt_nat,xt_ipvs,xt_comment,xt_set,ip6_tables,ipt_REJECT,ip_tables,xt_limit,ip6table_mangle,xt_MASQUERADE,iptable_mangle,xt_mark autofs4 53248 2 zfs 5677056 161 zunicode 335872 1 zfs zzstd 495616 1 zfs zlua 200704 1 zfs zavl 24576 1 zfs icp 380928 1 zfs zcommon 114688 2 zfs,icp znvpair 106496 2 zfs,zcommon spl 159744 6 zfs,icp,zzstd,znvpair,zcommon,zavl raid10 65536 0 raid456 180224 0 async_raid6_recov 24576 1 raid456 async_memcpy 20480 2 raid456,async_raid6_recov async_pq 20480 2 raid456,async_raid6_recov async_xor 20480 3 async_pq,raid456,async_raid6_recov async_tx 20480 5 async_pq,async_memcpy,async_xor,raid456,async_raid6_recov xor 24576 1 async_xor raid6_pq 122880 3 async_pq,raid456,async_raid6_recov libcrc32c 16384 4 nf_conntrack,nf_nat,raid456,ip_vs crc32c_generic 16384 0 raid1 53248 2 hid_generic 16384 0 raid0 24576 0 sd_mod 61440 14 t10_pi 16384 1 sd_mod multipath 20480 0 crc_t10dif 20480 1 t10_pi usbhid 65536 0 crct10dif_generic 16384 0 linear 20480 0 hid 147456 2 usbhid,hid_generic md_mod 184320 8 raid1,raid10,raid0,linear,raid456,multipath uas 32768 0 usb_storage 81920 2 uas crct10dif_pclmul 16384 1 crct10dif_common 16384 3 crct10dif_generic,crc_t10dif,crct10dif_pclmul crc32_pclmul 16384 0 ahci 40960 8 crc32c_intel 24576 1 libahci 45056 1 ahci ghash_clmulni_intel 16384 0 xhci_pci 20480 0 ehci_pci 20480 0 igb 262144 0 aesni_intel 368640 6 xhci_hcd 307200 1 xhci_pci ehci_hcd 98304 1 ehci_pci libaes 16384 1 aesni_intel i2c_algo_bit 16384 2 igb,mgag200 libata 290816 2 libahci,ahci crypto_simd 16384 1 aesni_intel dca 16384 1 igb ptp 32768 1 igb cryptd 24576 4 crypto_simd,ghash_clmulni_intel glue_helper 16384 1 aesni_intel pps_core 24576 1 ptp scsi_mod 262144 5 sd_mod,usb_storage,uas,libata,sg usbcore 323584 7 xhci_hcd,ehci_pci,usbhid,usb_storage,ehci_hcd,xhci_pci,uas wmi 36864 0 truenas# cat /etc/docker/daemon.json {"data-root": "/mnt/Data/ix-applications/docker", "exec-opts": ["native.cgroupdriver=cgroupfs"], "iptables": false, "bridge": "none", "runtimes": {"nvidia": {"path": "/usr/bin/nvidia-container-runtime", "runtimeArgs": []}}, "default-runtime": "nvidia"}# truenas
KTBBQQ 0 Posted September 6, 2021 Author Posted September 6, 2021 Graphics card problem? drivers problem? system? how hard troubleshooting without your!!! Thanks everyone .
KTBBQQ 0 Posted September 6, 2021 Author Posted September 6, 2021 can you help me? Truenas scale docker emby fails. - Linux - Emby Community
KTBBQQ 0 Posted September 7, 2021 Author Posted September 7, 2021 I think found err ...look this: truenas# cat /var/log/containers/nvidia-device-plugin-daemonset-wxrbz_kube-system_nvidia-device-plugin-ctr-c9d5ee6646581d8b4dcd93c111f9c93df1cff0cc69c0515047a73722921dab29.log {"log":"2021/09/07 14:31:55 Loading NVML\n","stream":"stderr","time":"2021-09-07T14:31:55.913175889Z"} {"log":"2021/09/07 14:31:55 Starting FS watcher.\n","stream":"stderr","time":"2021-09-07T14:31:55.915444086Z"} {"log":"2021/09/07 14:31:55 Starting OS watcher.\n","stream":"stderr","time":"2021-09-07T14:31:55.915577717Z"} {"log":"2021/09/07 14:31:55 Retreiving plugins.\n","stream":"stderr","time":"2021-09-07T14:31:55.915813525Z"} {"log":"2021/09/07 14:31:55 Starting GRPC server for 'nvidia.com/gpu'\n","stream":"stderr","time":"2021-09-07T14:31:55.92206796Z"} {"log":"2021/09/07 14:31:55 Starting to serve 'nvidia.com/gpu' on /var/lib/kubelet/device-plugins/nvidia.sock\n","stream":"stderr","time":"2021-09-07T14:31:55.922866158Z"} {"log":"2021/09/07 14:31:55 Registered device plugin for 'nvidia.com/gpu' with Kubelet\n","stream":"stderr","time":"2021-09-07T14:31:55.924238864Z"} {"log":"2021/09/07 14:31:55 Warning: GPU-834050d9-2893-41b7-3ad7-0397c2c45637 is too old to support healthchecking: nvml: Not Supported. Marking it unhealthy.\n","stream":"stderr","time":"2021-09-07T14:31:55.924719921Z"} {"log":"2021/09/07 14:31:55 'nvidia.com/gpu' device marked unhealthy: GPU-834050d9-2893-41b7-3ad7-0397c2c45637\n","stream":"stderr","time":"2021-09-07T14:31:55.924869629Z"} @Luke
Luke 42077 Posted September 7, 2021 Posted September 7, 2021 Did you go through the above link that i sent you earlier?
KTBBQQ 0 Posted September 9, 2021 Author Posted September 9, 2021 @Luke Yes, I've browsed the connection you sent. I found that it's not a configuration problem, but a hardware problem. I'm going to replace a graphics card and test it again. Thank you very much for your help.
KTBBQQ 0 Posted September 13, 2021 Author Posted September 13, 2021 @Luke Hello, I replaced the p620 graphics card. Now I can pass the health check, but it still appears: Failed to initialize VA /dev/dri/renderD128. Error -1， I've read the connection you gave me in detail, but I use truenas. According to the connection you sent, no problem is found. Now I redo the system and try again. Have you ever used this system? My data is in truenas, so I can only use this.
KTBBQQ 0 Posted September 13, 2021 Author Posted September 13, 2021 @Luke This my docker info truenas# docker info Client: Context: default Debug Mode: false Plugins: app: Docker App (Docker Inc., v0.9.1-beta3) buildx: Build with BuildKit (Docker Inc., v0.6.1-docker) scan: Docker Scan (Docker Inc., v0.8.0) Server: Containers: 5 Running: 5 Paused: 0 Stopped: 0 Images: 3 Server Version: 20.10.8 Storage Driver: zfs Zpool: Data Zpool Health: ONLINE Parent Dataset: Data/ix-applications/docker Space Used By Parent: 98304 Space Available: 1080732762112 Parent Quota: no Compression: lz4 Logging Driver: json-file Cgroup Driver: cgroupfs Cgroup Version: 1 Plugins: Volume: local Network: bridge host ipvlan macvlan null overlay Log: awslogs fluentd gcplogs gelf journald json-file local logentries splunk syslog Swarm: inactive Runtimes: io.containerd.runc.v2 io.containerd.runtime.v1.linux nvidia runc Default Runtime: nvidia Init Binary: docker-init containerd version: e25210fe30a0a703442421b0f60afac609f950a3 runc version: v1.0.1-0-g4144b63 init version: de40ad0 Security Options: apparmor seccomp Profile: default Kernel Version: 5.10.42+truenas Operating System: Debian GNU/Linux 11 (bullseye) OSType: linux Architecture: x86_64 CPUs: 12 Total Memory: 62.66GiB Name: truenas.local ID: AXOR:DA7H:LR74:FY2L:DL5Y:T37T:FGHC:CNH7:M7ZD:H7FQ:VPUI:INKC Docker Root Dir: /mnt/Data/ix-applications/docker Debug Mode: false Registry: https://index.docker.io/v1/ Labels: Experimental: false Insecure Registries: 127.0.0.0/8 Live Restore Enabled: false
KTBBQQ 0 Posted September 13, 2021 Author Posted September 13, 2021 truenas# docker container ls CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES d3980fce39c0 3885a5b7f138 "/coredns -conf /etc…" 9 minutes ago Up 9 minutes k8s_coredns_coredns-7448499f4d-2v6g8_kube-system_e73217f5-1b96-4c52-85b5-c4d6b0db9208_0 6e95dd1a99a7 rancher/pause:3.1 "/pause" 9 minutes ago Up 9 minutes k8s_POD_openebs-zfs-controller-0_kube-system_7e1f135f-089a-405a-9f87-992f0663d5dc_0 ba2054e02956 rancher/pause:3.1 "/pause" 9 minutes ago Up 9 minutes k8s_POD_coredns-7448499f4d-2v6g8_kube-system_e73217f5-1b96-4c52-85b5-c4d6b0db9208_0 5515cae20cc1 rancher/pause:3.1 "/pause" 9 minutes ago Up 9 minutes k8s_POD_nvidia-device-plugin-daemonset-pwd47_kube-system_37ec58b8-ed21-47cc-872c-8151bf70a15f_0 6dca846fce7a rancher/pause:3.1 "/pause" 9 minutes ago Up 9 minutes k8s_POD_openebs-zfs-node-wcv6f_kube-system_c78eb2d2-f2c5-4960-9fb5-ab5c0af0bf88_0
KTBBQQ 0 Posted September 13, 2021 Author Posted September 13, 2021 @Luke Successful！！！congratulations for me. Thank you so much!
hoffmannlin 0 Posted January 11, 2022 Posted January 11, 2022 hello @KTBBQQ and @Luke i already follow all step : but have same issue system: TrueNAS-SCALE-22.02-RC.2 # nvidia-smi Tue Jan 11 14:50:45 2022 +-----------------------------------------------------------------------------+ | NVIDIA-SMI 460.73.01 Driver Version: 460.73.01 CUDA Version: 11.2 | |-------------------------------+----------------------+----------------------+ | GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC | | Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. | | | | MIG M. | |===============================+======================+======================| | 0 Quadro P400 Off | 00000000:03:00.0 Off | N/A | | 34% 27C P8 N/A / N/A | 0MiB / 1999MiB | 0% Default | | | | N/A | +-------------------------------+----------------------+----------------------+ +-----------------------------------------------------------------------------+ | Processes: | | GPU GI CI PID Type Process name GPU Memory | | ID ID Usage | |=============================================================================| | No running processes found | +-----------------------------------------------------------------------------+ / # ls -la /dev/dri/ total 0 drwxrwxrwx 2 root root 100 Jan 11 06:38 . drwxr-xr-x 6 root root 440 Jan 11 06:38 .. crw-rw---- 1 root 44 226, 0 Jan 11 06:38 card0 crw-rw---- 1 root 44 226, 1 Jan 11 06:38 card1 crw-rw---- 1 root 107 226, 128 Jan 11 06:38 renderD128 / # whoami root / # / # ffdetect vaencdec ffdetect version 4.3.0-emby_2021_02_27 Copyright (c) 2018-2021 softworkz for Emby LLC built with gcc 8.3.0 (crosstool-NG 1.24.0) configuration: --cc=x86_64-emby-linux-gnu-gcc --prefix=/home/embybuilder/Buildbot/x64/ffmpeg-x64/staging --disable-alsa --disable-debug --disable-doc --disable-ffplay --disable-libpulse --disable-vdpau --disable-xlib --enable-chromaprint --enable-fontconfig --enable-gnutls --enable-gpl --enable-iconv --enable-libaribb24 --enable-libass --enable-libdav1d --enable-libfreetype --enable-libfribidi --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libzvbi --enable-pic --enable-version3 --enable-libx265 --enable-cuda-llvm --enable-cuvid --enable-libmfx --enable-nvdec --enable-nvenc --enable-vaapi --enable-opencl --enable-cross-compile --cross-prefix=x86_64-emby-linux-gnu- --arch=x86_64 --target-os=linux --enable-shared --disable-static --pkg-config=pkg-config --pkg-config-flags=--static --extra-libs='-lm -lstdc++ -pthread' libavutil 56. 36.100 / 56. 36.100 [DEVICE] DeviceIndex=0 DEVICEINFO:VendorName=NVIDIA Corporation DEVICEINFO:DeviceName=GP107GL [Quadro P400] DEVICEINFO:SubsytemVendorName=Dell DEVICEINFO:VendorId=4318 DEVICEINFO:DeviceId=7347 DEVICEINFO:SubsytemVendorId=4136 DEVICEINFO:SubsytemDeviceId=4542 DEVICEINFO:DevPath=/sys/bus/pci/devices/0000:03:00.0 DEVICEINFO:DrmCard=/dev/dri/card1 DEVICEINFO:DrmRender=/dev/dri/renderD128 DEVICEINFO:IsEnabled=1 DEVICEINFO:IsBootVga=1 DEVICEINFO:ERROR:Number=-1 DEVICEINFO:ERROR:Message=Failed to initialize VA /dev/dri/renderD128. Error -1 [/DEVICE] [DEVICE] DeviceIndex=1 DEVICEINFO:VendorName=ASPEED Technology, Inc. DEVICEINFO:DeviceName=ASPEED Graphics Family DEVICEINFO:SubsytemVendorName=ASUSTeK Computer Inc. DEVICEINFO:VendorId=6659 DEVICEINFO:DeviceId=8192 DEVICEINFO:SubsytemVendorId=4163 DEVICEINFO:SubsytemDeviceId=34027 DEVICEINFO:DevPath=/sys/bus/pci/devices/0000:09:00.0 DEVICEINFO:DrmCard=/dev/dri/card0 DEVICEINFO:IsEnabled=1 DEVICEINFO:IsBootVga=0 DEVICEINFO:ERROR:Number=-1 DEVICEINFO:ERROR:Message=Failed to open the drm device (null) [/DEVICE]
Luke 42077 Posted January 11, 2022 Posted January 11, 2022 6 hours ago, hoffmannlin said: hello @KTBBQQ and @Luke i already follow all step : but have same issue system: TrueNAS-SCALE-22.02-RC.2 # nvidia-smi Tue Jan 11 14:50:45 2022 +-----------------------------------------------------------------------------+ | NVIDIA-SMI 460.73.01 Driver Version: 460.73.01 CUDA Version: 11.2 | |-------------------------------+----------------------+----------------------+ | GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC | | Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. | | | | MIG M. | |===============================+======================+======================| | 0 Quadro P400 Off | 00000000:03:00.0 Off | N/A | | 34% 27C P8 N/A / N/A | 0MiB / 1999MiB | 0% Default | | | | N/A | +-------------------------------+----------------------+----------------------+ +-----------------------------------------------------------------------------+ | Processes: | | GPU GI CI PID Type Process name GPU Memory | | ID ID Usage | |=============================================================================| | No running processes found | +-----------------------------------------------------------------------------+ / # ls -la /dev/dri/ total 0 drwxrwxrwx 2 root root 100 Jan 11 06:38 . drwxr-xr-x 6 root root 440 Jan 11 06:38 .. crw-rw---- 1 root 44 226, 0 Jan 11 06:38 card0 crw-rw---- 1 root 44 226, 1 Jan 11 06:38 card1 crw-rw---- 1 root 107 226, 128 Jan 11 06:38 renderD128 / # whoami root / # / # ffdetect vaencdec ffdetect version 4.3.0-emby_2021_02_27 Copyright (c) 2018-2021 softworkz for Emby LLC built with gcc 8.3.0 (crosstool-NG 1.24.0) configuration: --cc=x86_64-emby-linux-gnu-gcc --prefix=/home/embybuilder/Buildbot/x64/ffmpeg-x64/staging --disable-alsa --disable-debug --disable-doc --disable-ffplay --disable-libpulse --disable-vdpau --disable-xlib --enable-chromaprint --enable-fontconfig --enable-gnutls --enable-gpl --enable-iconv --enable-libaribb24 --enable-libass --enable-libdav1d --enable-libfreetype --enable-libfribidi --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libzvbi --enable-pic --enable-version3 --enable-libx265 --enable-cuda-llvm --enable-cuvid --enable-libmfx --enable-nvdec --enable-nvenc --enable-vaapi --enable-opencl --enable-cross-compile --cross-prefix=x86_64-emby-linux-gnu- --arch=x86_64 --target-os=linux --enable-shared --disable-static --pkg-config=pkg-config --pkg-config-flags=--static --extra-libs='-lm -lstdc++ -pthread' libavutil 56. 36.100 / 56. 36.100 [DEVICE] DeviceIndex=0 DEVICEINFO:VendorName=NVIDIA Corporation DEVICEINFO:DeviceName=GP107GL [Quadro P400] DEVICEINFO:SubsytemVendorName=Dell DEVICEINFO:VendorId=4318 DEVICEINFO:DeviceId=7347 DEVICEINFO:SubsytemVendorId=4136 DEVICEINFO:SubsytemDeviceId=4542 DEVICEINFO:DevPath=/sys/bus/pci/devices/0000:03:00.0 DEVICEINFO:DrmCard=/dev/dri/card1 DEVICEINFO:DrmRender=/dev/dri/renderD128 DEVICEINFO:IsEnabled=1 DEVICEINFO:IsBootVga=1 DEVICEINFO:ERROR:Number=-1 DEVICEINFO:ERROR:Message=Failed to initialize VA /dev/dri/renderD128. Error -1 [/DEVICE] [DEVICE] DeviceIndex=1 DEVICEINFO:VendorName=ASPEED Technology, Inc. DEVICEINFO:DeviceName=ASPEED Graphics Family DEVICEINFO:SubsytemVendorName=ASUSTeK Computer Inc. DEVICEINFO:VendorId=6659 DEVICEINFO:DeviceId=8192 DEVICEINFO:SubsytemVendorId=4163 DEVICEINFO:SubsytemDeviceId=34027 DEVICEINFO:DevPath=/sys/bus/pci/devices/0000:09:00.0 DEVICEINFO:DrmCard=/dev/dri/card0 DEVICEINFO:IsEnabled=1 DEVICEINFO:IsBootVga=0 DEVICEINFO:ERROR:Number=-1 DEVICEINFO:ERROR:Message=Failed to open the drm device (null) [/DEVICE] @hoffmannlin can you please describe the issue that you're having? Thanks.
hoffmannlin 0 Posted January 12, 2022 Posted January 12, 2022 hello @Luke root@truenas[~]# uname -a Linux truenas.local 5.10.81+truenas #1 SMP Mon Dec 20 21:03:38 UTC 2021 x86_64 GNU/Linux root@truenas[~]# echo $(. /etc/os-release;echo $ID$VERSION_ID) debian11 root@truenas[~]# nvidia-smi Wed Jan 12 19:25:31 2022 +-----------------------------------------------------------------------------+ | NVIDIA-SMI 460.91.03 Driver Version: 460.91.03 CUDA Version: 11.2 | |-------------------------------+----------------------+----------------------+ | GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC | | Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. | | | | MIG M. | |===============================+======================+======================| | 0 Quadro P400 Off | 00000000:03:00.0 Off | N/A | | 34% 24C P8 N/A / N/A | 0MiB / 2000MiB | 0% Default | | | | N/A | +-------------------------------+----------------------+----------------------+ +-----------------------------------------------------------------------------+ | Processes: | | GPU GI CI PID Type Process name GPU Memory | | ID ID Usage | |=============================================================================| | No running processes found | +-----------------------------------------------------------------------------+ i can saw gpu is nvidia quadro p400 start emby by docker docker container create \ --name="emby-server" \ --network="host" \ --volume /mnt/top-case/emby/config:/config \ --volume /mnt/top-case:/mnt \ --device /dev/dri:/dev/dri \ --publish 8096:8096 \ --env UID=0 \ --env GID=0 \ --env GIDLIST=0 \ --gpus all \ emby/embyserver:latest root@truenas[~]# docker exec -it emby-server sh / # ffdetect vaencdec ffdetect version 4.3.0-emby_2021_02_27 Copyright (c) 2018-2021 softworkz for Emby LLC built with gcc 8.3.0 (crosstool-NG 1.24.0) configuration: --cc=x86_64-emby-linux-gnu-gcc --prefix=/home/embybuilder/Buildbot/x64/ffmpeg-x64/staging --disable-alsa --disable-debug --disable-doc --disable-ffplay --disable-libpulse --disable-vdpau --disable-xlib --enable-chromaprint --enable-fontconfig --enable-gnutls --enable-gpl --enable-iconv --enable-libaribb24 --enable-libass --enable-libdav1d --enable-libfreetype --enable-libfribidi --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libzvbi --enable-pic --enable-version3 --enable-libx265 --enable-cuda-llvm --enable-cuvid --enable-libmfx --enable-nvdec --enable-nvenc --enable-vaapi --enable-opencl --enable-cross-compile --cross-prefix=x86_64-emby-linux-gnu- --arch=x86_64 --target-os=linux --enable-shared --disable-static --pkg-config=pkg-config --pkg-config-flags=--static --extra-libs='-lm -lstdc++ -pthread' libavutil 56. 36.100 / 56. 36.100 [DEVICE] DeviceIndex=0 DEVICEINFO:VendorName=NVIDIA Corporation DEVICEINFO:DeviceName=GP107GL [Quadro P400] DEVICEINFO:SubsytemVendorName=Dell DEVICEINFO:VendorId=4318 DEVICEINFO:DeviceId=7347 DEVICEINFO:SubsytemVendorId=4136 DEVICEINFO:SubsytemDeviceId=4542 DEVICEINFO:DevPath=/sys/bus/pci/devices/0000:03:00.0 DEVICEINFO:DrmCard=/dev/dri/card1 DEVICEINFO:DrmRender=/dev/dri/renderD128 DEVICEINFO:IsEnabled=1 DEVICEINFO:IsBootVga=0 DEVICEINFO:ERROR:Number=-1 DEVICEINFO:ERROR:Message=Failed to initialize VA /dev/dri/renderD128. Error -1 [/DEVICE] [DEVICE] DeviceIndex=1 DEVICEINFO:VendorName=ASPEED Technology, Inc. DEVICEINFO:DeviceName=ASPEED Graphics Family DEVICEINFO:SubsytemVendorName=ASUSTeK Computer Inc. DEVICEINFO:VendorId=6659 DEVICEINFO:DeviceId=8192 DEVICEINFO:SubsytemVendorId=4163 DEVICEINFO:SubsytemDeviceId=34027 DEVICEINFO:DevPath=/sys/bus/pci/devices/0000:09:00.0 DEVICEINFO:DrmCard=/dev/dri/card0 DEVICEINFO:IsEnabled=1 DEVICEINFO:IsBootVga=1 DEVICEINFO:ERROR:Number=-1 DEVICEINFO:ERROR:Message=Failed to open the drm device (null) [/DEVICE] and Transcoding all empty hardware_detection log hardware_detection-63777583812.txt
Luke 42077 Posted January 12, 2022 Posted January 12, 2022 3 hours ago, hoffmannlin said: hello @Luke root@truenas[~]# uname -a Linux truenas.local 5.10.81+truenas #1 SMP Mon Dec 20 21:03:38 UTC 2021 x86_64 GNU/Linux root@truenas[~]# echo $(. /etc/os-release;echo $ID$VERSION_ID) debian11 root@truenas[~]# nvidia-smi Wed Jan 12 19:25:31 2022 +-----------------------------------------------------------------------------+ | NVIDIA-SMI 460.91.03 Driver Version: 460.91.03 CUDA Version: 11.2 | |-------------------------------+----------------------+----------------------+ | GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC | | Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. | | | | MIG M. | |===============================+======================+======================| | 0 Quadro P400 Off | 00000000:03:00.0 Off | N/A | | 34% 24C P8 N/A / N/A | 0MiB / 2000MiB | 0% Default | | | | N/A | +-------------------------------+----------------------+----------------------+ +-----------------------------------------------------------------------------+ | Processes: | | GPU GI CI PID Type Process name GPU Memory | | ID ID Usage | |=============================================================================| | No running processes found | +-----------------------------------------------------------------------------+ i can saw gpu is nvidia quadro p400 start emby by docker docker container create \ --name="emby-server" \ --network="host" \ --volume /mnt/top-case/emby/config:/config \ --volume /mnt/top-case:/mnt \ --device /dev/dri:/dev/dri \ --publish 8096:8096 \ --env UID=0 \ --env GID=0 \ --env GIDLIST=0 \ --gpus all \ emby/embyserver:latest root@truenas[~]# docker exec -it emby-server sh / # ffdetect vaencdec ffdetect version 4.3.0-emby_2021_02_27 Copyright (c) 2018-2021 softworkz for Emby LLC built with gcc 8.3.0 (crosstool-NG 1.24.0) configuration: --cc=x86_64-emby-linux-gnu-gcc --prefix=/home/embybuilder/Buildbot/x64/ffmpeg-x64/staging --disable-alsa --disable-debug --disable-doc --disable-ffplay --disable-libpulse --disable-vdpau --disable-xlib --enable-chromaprint --enable-fontconfig --enable-gnutls --enable-gpl --enable-iconv --enable-libaribb24 --enable-libass --enable-libdav1d --enable-libfreetype --enable-libfribidi --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libzvbi --enable-pic --enable-version3 --enable-libx265 --enable-cuda-llvm --enable-cuvid --enable-libmfx --enable-nvdec --enable-nvenc --enable-vaapi --enable-opencl --enable-cross-compile --cross-prefix=x86_64-emby-linux-gnu- --arch=x86_64 --target-os=linux --enable-shared --disable-static --pkg-config=pkg-config --pkg-config-flags=--static --extra-libs='-lm -lstdc++ -pthread' libavutil 56. 36.100 / 56. 36.100 [DEVICE] DeviceIndex=0 DEVICEINFO:VendorName=NVIDIA Corporation DEVICEINFO:DeviceName=GP107GL [Quadro P400] DEVICEINFO:SubsytemVendorName=Dell DEVICEINFO:VendorId=4318 DEVICEINFO:DeviceId=7347 DEVICEINFO:SubsytemVendorId=4136 DEVICEINFO:SubsytemDeviceId=4542 DEVICEINFO:DevPath=/sys/bus/pci/devices/0000:03:00.0 DEVICEINFO:DrmCard=/dev/dri/card1 DEVICEINFO:DrmRender=/dev/dri/renderD128 DEVICEINFO:IsEnabled=1 DEVICEINFO:IsBootVga=0 DEVICEINFO:ERROR:Number=-1 DEVICEINFO:ERROR:Message=Failed to initialize VA /dev/dri/renderD128. Error -1 [/DEVICE] [DEVICE] DeviceIndex=1 DEVICEINFO:VendorName=ASPEED Technology, Inc. DEVICEINFO:DeviceName=ASPEED Graphics Family DEVICEINFO:SubsytemVendorName=ASUSTeK Computer Inc. DEVICEINFO:VendorId=6659 DEVICEINFO:DeviceId=8192 DEVICEINFO:SubsytemVendorId=4163 DEVICEINFO:SubsytemDeviceId=34027 DEVICEINFO:DevPath=/sys/bus/pci/devices/0000:09:00.0 DEVICEINFO:DrmCard=/dev/dri/card0 DEVICEINFO:IsEnabled=1 DEVICEINFO:IsBootVga=1 DEVICEINFO:ERROR:Number=-1 DEVICEINFO:ERROR:Message=Failed to open the drm device (null) [/DEVICE] and Transcoding all empty hardware_detection log hardware_detection-63777583812.txt 123.88 kB · 1 download Did you take a look at this?
hoffmannlin 0 Posted January 13, 2022 Posted January 13, 2022 i follow this post did. but my system is debian11 root@truenas[~]# uname -a Linux truenas.local 5.10.81+truenas #1 SMP Mon Dec 20 21:03:38 UTC 2021 x86_64 GNU/Linux root@truenas[~]# echo $(. /etc/os-release;echo $ID$VERSION_ID) debian11 nvidia-docker only support debian9 and 10 https://nvidia.github.io/nvidia-docker/ but my docker version is 22.10.11 # docker info Client: Context: default Debug Mode: false Plugins: app: Docker App (Docker Inc., v0.9.1-beta3) buildx: Build with BuildKit (Docker Inc., v0.6.3-docker) scan: Docker Scan (Docker Inc., v0.9.0) Server: Containers: 24 Running: 11 Paused: 0 Stopped: 13 Images: 16 Server Version: 20.10.11 so i use --gpus all to create docker
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now