pir8radio 1292 Posted January 24, 2021 Share Posted January 24, 2021 What is going on here? IPTV Stream dropping out? but why "Seek to start" (i didnt seek) and "Function not implemented" Link to comment Share on other sites More sharing options...
pir8radio 1292 Posted January 24, 2021 Author Share Posted January 24, 2021 this is happening to like 20 people watching the same channel.. lol Link to comment Share on other sites More sharing options...
pir8radio 1292 Posted January 24, 2021 Author Share Posted January 24, 2021 any input from anyone, trying to troubleshoot this tonight. Happening like every 20-120 seconds. Link to comment Share on other sites More sharing options...
Luke 37132 Posted January 24, 2021 Share Posted January 24, 2021 What problem are you having? Link to comment Share on other sites More sharing options...
pir8radio 1292 Posted January 24, 2021 Author Share Posted January 24, 2021 (edited) 34 minutes ago, Luke said: What problem are you having? i think its an iptv stream issue... just wondering what you see in that transcode log... When watching on emby the stream just kicks you back to the guide like every 20-120 seconds.. all of the logs look the same as the one above.... all goes well, no buffering, then everyone just gets booted back to the guide... can start the stream right back up no issues. Edited January 24, 2021 by pir8radio Link to comment Share on other sites More sharing options...
Carlo 4330 Posted January 24, 2021 Share Posted January 24, 2021 @softworkz Do you know why we see the "Seek to start" here? Any hints for diagnosing this? Link to comment Share on other sites More sharing options...
Luke 37132 Posted January 24, 2021 Share Posted January 24, 2021 complete log files? Link to comment Share on other sites More sharing options...
Carlo 4330 Posted January 24, 2021 Share Posted January 24, 2021 @pir8radio Link to comment Share on other sites More sharing options...
pir8radio 1292 Posted January 25, 2021 Author Share Posted January 25, 2021 I'll PM... do you want emby logs or transcode logs? Link to comment Share on other sites More sharing options...
Happy2Play 8318 Posted January 25, 2021 Share Posted January 25, 2021 9 minutes ago, pir8radio said: I'll PM... do you want emby logs or transcode logs? I would say both. Link to comment Share on other sites More sharing options...
neik 837 Posted January 27, 2021 Share Posted January 27, 2021 So, what was the result of the analyzes? Is this solved @pir8radio? If so, what was the reason for the issue and the solution? Thank you! Link to comment Share on other sites More sharing options...
pir8radio 1292 Posted January 27, 2021 Author Share Posted January 27, 2021 (edited) 8 hours ago, neik said: So, what was the result of the analyzes? Is this solved @pir8radio? If so, what was the reason for the issue and the solution? Thank you! they are still waiting on me to provide logs.. I have been slacking. sending today. LOGS SENT Edited January 27, 2021 by pir8radio 1 Link to comment Share on other sites More sharing options...
Luke 37132 Posted February 12, 2021 Share Posted February 12, 2021 @softworkz may have some thoughts on that message. Link to comment Share on other sites More sharing options...
neik 837 Posted February 28, 2021 Share Posted February 28, 2021 On 2/12/2021 at 6:40 PM, Luke said: @softworkz may have some thoughts on that message. What were @softworkz thoughts on this? I just had the same last night: 21:30:14.722 [hls @ 0x203f8c0] Skip ('#EXT-X-VERSION:3') 21:30:14.722 [https @ 0x206ec40] Opening 'https://xxxxxxxxxxxxxxxxxxxxxxxxxx/15012216_485.ts' for reading 21:30:14.890 frame= 7006 fps= 60 q=-1.0 size= 78315kB time=00:02:20.10 bitrate=5223.6kbits/s throttle=off speed=1.05x 21:30:14.933 Seek to start failed. 21:30:14.933 https://xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/zzzzzzzzzzzz.m3u8: Operation not permitted 21:30:14.935 21:30:14.935 [segment @ 0x20c6ec0] Opening '/var/lib/emby/transcoding-temp/2FFA27.m3u8.tmp' for writing 21:30:14.936 SegmentComplete=video:0 Index=46 Start=138.280000 End=141.480000 Duration=3.200000 offset_pts=0 start_pts=138280000 Frames=158 filename=hls/2FFA27/2FFA27_46.ts 21:30:14.936 frame= 7068 fps= 60 q=-1.0 Lsize= 78927kB time=00:02:21.34 bitrate=5211.7kbits/s throttle=off speed=1.06x 21:30:14.936 video:76702kB audio:2224kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.000000% Last message repeated 1 times 21:30:14.936 EXIT 21:30:14.937 [aac @ 0x2099440] Qavg: 158.853 21:30:14.937 Link to comment Share on other sites More sharing options...
Carlo 4330 Posted February 28, 2021 Share Posted February 28, 2021 Was this a regular streaming TV channel or VOD content? Link to comment Share on other sites More sharing options...
softworkz 3341 Posted February 28, 2021 Share Posted February 28, 2021 In all cases cases of tv provider streaming issues: Always start with changing your password at the tv provider Next, enter the new password only in Emby Server - nowhere else and don't tell anybody Then, try again and make sure that your simultaneous streams limit does not get hit If that doesn't help: Install the Diagnostics Plugin Configure ffmpeg log level to "Verbose" and reproduce We want to see the http error response code that are being received (if they don't show, debug log level might be required) Use this information for creating a case with your provider Link to comment Share on other sites More sharing options...
neik 837 Posted February 28, 2021 Share Posted February 28, 2021 1 hour ago, cayars said: Was this a regular streaming TV channel or VOD content? Regular TV channel, not using VOD at all. @softworkz, that is assuming the problem is on the providers end but in my case many times a channel has those hickups on Emby the exact same channel plays just fine on my PC using VLC. So, not quite sure it is a provider issue alone... Iirc the settings we set using the diagnostic plugin get resetted once the server gets restarted, right? Link to comment Share on other sites More sharing options...
softworkz 3341 Posted February 28, 2021 Share Posted February 28, 2021 6 minutes ago, neik said: @softworkz, that is assuming the problem is on the providers end but in my case many times a channel has those hickups on Emby the exact same channel plays just fine on my PC using VLC. Not quite and I'm not assuming anything. The upper part is about making sure that your password hasn't been compromised and your streams limit doesn't get exceeded. Other clients might retry/reload more aggressively and could even hide a problem like that (I can't say anything specific about VLC). Now it needs to be understood, that the log that is shown in the OP is an ffmpeg log. In case of HLS, Emby uses ffmpeg as HLS client and lets it do all the work (these things will all change in the future, but we're not there yet..). On the other side, almost all of those providers are using ffmpeg for creating and delivering the streams. And on the client side, we have ffmpeg again. There's actually not "much Emby" in this game. So when an ffmpeg as HLS client cannot reliably receive an HLS video stream generated by ffmpeg at the server side, then this is something that needs to be reported to the provider rather than Emby. The only responsibility of Emby in this situation are the parameters used to run ffmpeg, but it's very unlikely that this could cause a problem with these specifics. PS: Just for clarity - what I'm saying here is valid for HLS. In the case of continuous MPEGTS streams via http, Emby is responsible for receiving those streams. Link to comment Share on other sites More sharing options...
Carlo 4330 Posted February 28, 2021 Share Posted February 28, 2021 I suppose this could be easily proven/tested by using ffmpeg standalone to record a stream and see if there is any problems this way. Link to comment Share on other sites More sharing options...
softworkz 3341 Posted February 28, 2021 Share Posted February 28, 2021 I'm sure that there won't be any different behavior between ffmpeg running "outside" or "inside" Emby (given the same command), because "inside" is still out-of-process. Guys, please follow the instructions that I have given above from top to bottom; that provides the best chances to get behind this with the least effort. Link to comment Share on other sites More sharing options...
neik 837 Posted March 2, 2021 Share Posted March 2, 2021 @softworkz, I will send you a (verbose) log from a channel that only showed a spinning circle on Emby and at the same time played just fine on VLC (both on my PC). I don't see anything special in that log but maybe you could have a look in a spare minute (or two). 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now