richwine4 0 Posted September 14, 2020 Share Posted September 14, 2020 I have Hauppage HVR-1265 tuners that Emby does not recognize on my Windows 10 system. I subsequently read that Emby requires a separate installation of WinTV 8.5 to recognize those tuners, but that future versions of Emby may not need WinTV. Does the most recent beta version of Emby still require WinTV to recognize Hauppage tuners? I would rather not pay for WinTV. Link to comment Share on other sites More sharing options...
arrbee99 1562 Posted September 14, 2020 Share Posted September 14, 2020 Pretty sure the most recent beta still requires WinTV. You could, I should imagine, switch to using something like NextPVR and associated plugin to feed Emby, which is free, if you don't mind experimenting. If interested see here for a few bits - https://emby.media/community/index.php?/topic/89889-next-pvr-plugin/ Link to comment Share on other sites More sharing options...
PenkethBoy 2063 Posted September 14, 2020 Share Posted September 14, 2020 Support is coming for tuners without wintv but its a long way off being usable yet so dont expect it to appear in the near future Actually adding wintv 10 will add required tuner drivers to your PC for the cards - have you done that? The cards wont work without the drivers Link to comment Share on other sites More sharing options...
richwine4 0 Posted September 14, 2020 Author Share Posted September 14, 2020 Thanks very much for the responses. I do have the drivers installed, but I guess I'll pony up the $13 for WinTV. Link to comment Share on other sites More sharing options...
PenkethBoy 2063 Posted September 14, 2020 Share Posted September 14, 2020 did your tuners not come with a lic number for wintv? Link to comment Share on other sites More sharing options...
richwine4 0 Posted September 14, 2020 Author Share Posted September 14, 2020 Maybe, but I bought them a couple of years ago for a different system. All I have now is the hardware. Link to comment Share on other sites More sharing options...
PenkethBoy 2063 Posted September 14, 2020 Share Posted September 14, 2020 pony time then Link to comment Share on other sites More sharing options...
Carlo 4331 Posted September 14, 2020 Share Posted September 14, 2020 19 hours ago, richwine4 said: I have Hauppage HVR-1265 tuners that Emby does not recognize on my Windows 10 system. I subsequently read that Emby requires a separate installation of WinTV 8.5 to recognize those tuners, but that future versions of Emby may not need WinTV. Does the most recent beta version of Emby still require WinTV to recognize Hauppage tuners? I would rather not pay for WinTV. This functionality is currently in the development branch currently being tested that is the Next Gen Live TV. It's in the near future so for now you'll need WinTV but not for much longer. With that said there is no ETA on Next Gen release so don't ask. Link to comment Share on other sites More sharing options...
richwine4 0 Posted September 14, 2020 Author Share Posted September 14, 2020 Thanks! Link to comment Share on other sites More sharing options...
PenkethBoy 2063 Posted September 15, 2020 Share Posted September 15, 2020 8 hours ago, cayars said: This functionality is currently in the development branch currently being tested that is the Next Gen Live TV. It's in the near future so for now you'll need WinTV but not for much longer. With that said there is no ETA on Next Gen release so don't ask. It way way off being usable - and the dev is very slow going - you are getting people hopes up for something that wont be avaialable for some time 1 Link to comment Share on other sites More sharing options...
Carlo 4331 Posted September 15, 2020 Share Posted September 15, 2020 I disagree and will leave it at that but I can understand why you might think that. Link to comment Share on other sites More sharing options...
PenkethBoy 2063 Posted September 15, 2020 Share Posted September 15, 2020 Considering i'm the only one with Hauppauge tuners who tests this new app - and it still very far away from working as a release app Lots of missing stuff or only place holders or its hit and miss if it works It will get there eventually but it hard to focus on it when things only happen every two to three weeks - see lack of posts by the majority of tester including yourself Ok - will leave the thread alone now. 1 Link to comment Share on other sites More sharing options...
SHSPVR 119 Posted September 15, 2020 Share Posted September 15, 2020 3 hours ago, PenkethBoy said: Considering i'm the only one with Hauppauge tuners who tests this new app - and it still very far away from working as a release app Lots of missing stuff or only place holders or its hit and miss if it works It will get there eventually but it hard to focus on it when things only happen every two to three weeks - see lack of posts by the majority of tester including yourself Ok - will leave the thread alone now. your not the only one Link to comment Share on other sites More sharing options...
PenkethBoy 2063 Posted September 15, 2020 Share Posted September 15, 2020 ah yes sorry - forgot about you Link to comment Share on other sites More sharing options...
MrGrymReaper 0 Posted October 7, 2020 Share Posted October 7, 2020 (edited) @PenkethBoy I also happen to have a Hauppauge WinTV-quadHD tuner card which really rocks. Anyway what version has this available to test? The system the card is in is really powerful indeed. Edited October 7, 2020 by MrGrymReaper Link to comment Share on other sites More sharing options...
PenkethBoy 2063 Posted October 7, 2020 Share Posted October 7, 2020 its going to be a while yet and its a closed set of testers currently Link to comment Share on other sites More sharing options...
shawnf 8 Posted August 27, 2021 Share Posted August 27, 2021 Hi. Just wondering if this is still in development? It was coming in the near future a year ago. I was going to get winTV when I read this thread about it being supported without it. If it isn't on the cards anymore I will go and get winTV. Link to comment Share on other sites More sharing options...
SHSPVR 119 Posted August 27, 2021 Share Posted August 27, 2021 38 minutes ago, shawnf said: Hi. Just wondering if this is still in development? It was coming in the near future a year ago. I was going to get winTV when I read this thread about it being supported without it. If it isn't on the cards anymore I will go and get winTV. yes Link to comment Share on other sites More sharing options...
arrbee99 1562 Posted August 27, 2021 Share Posted August 27, 2021 Its still in development, but will still be a while. I'd try out NextPVR plus plugin, its a good solution IMHO. 1 Link to comment Share on other sites More sharing options...
shawnf 8 Posted September 4, 2021 Share Posted September 4, 2021 Thanks. I am playing with NextPVR now. Link to comment Share on other sites More sharing options...
earratia14 11 Posted May 9, 2022 Share Posted May 9, 2022 Still no updates on this? The OP is from 2020 and the last post from H2 2021. I found older posts talking about this subject and the planned or 'in the works' version which will not require WinTV. Tried using NextPVR but if you want the 14 day programming guide like the one already available in Emby, you need to pay extra cash for a Schedules Direct subscription. Link to comment Share on other sites More sharing options...
SHSPVR 119 Posted May 9, 2022 Share Posted May 9, 2022 (edited) 20 minutes ago, earratia14 said: Still no updates on this? The OP is from 2020 and the last post from H2 2021. I found older posts talking about this subject and the planned or 'in the works' version which will not require WinTV. Tried using NextPVR but if you want the 14 day programming guide like the one already available in Emby, you need to pay extra cash for a Schedules Direct subscription. It is in the works no it free guide is a available with windows from tuner no linux support but it's only give you a few days if you can live with that and there are some downsides like the lack of all the other information about the show and seasons info Edited May 9, 2022 by SHSPVR Link to comment Share on other sites More sharing options...
earratia14 11 Posted May 9, 2022 Share Posted May 9, 2022 It has been in the works for a while now with no recent updates. For my particular installation this would make Emby flawless. Every week or so I have to logon to the server because Emby has lost communication with WinTV. Have to kill a bunch of HauppaugeWindowsProvider processes and restart the WinTV service... then re-start Emby as well since it starts eating up the CPU as each HauppaugeWindowsProvider process dies. That's the only reason I ever need to intervene with Emby. It works perfectly with everything else. Link to comment Share on other sites More sharing options...
Carlo 4331 Posted May 9, 2022 Share Posted May 9, 2022 (edited) You may want to give this a try as I think you'll like this setup a lot better. Requires Emby Server 4.7. Download and install the latest beta server version if 4.7 isn't released yet (at time of reading) Install and setup NextPVR (same or different machine). Configure NextPVR for your tuner and remote access. No need to add guide data if the only use is Emby. Install NextPVR plugin from the catalog and configure it to access NextPVR (easy). Add Emby Guide Data then verify channel mapping. Test/Try it. 4.7 version of Emby uses a new Plugin Framework for TV. The new framework changes the way Emby uses other services through plugins. The new plugin framework's main job now is to present a new "tuner" to Emby. Emby now treats like any other tuner or m3u. This allows Emby to treat it like any other tuner. You now setup and use Emby Guide Data. All recording setup, playback, saved recordings are handled by Emby. PS Don't forget to register/donate to NextPVR. They've been great supporting us and helping to test the new plugin framework. https://www.nextpvr.com/donate.html If you have any questions feel free to reach out and ask for help, Carlo Edited May 11, 2022 by cayars 1 Link to comment Share on other sites More sharing options...
emveepee 112 Posted May 10, 2022 Share Posted May 10, 2022 1 hour ago, cayars said: You may want to give this a try as I think you'll like this setup a lot better. Requires Emby Server 4.7. Download and install the latest beta server version if 4.7 isn't released yet (at time of reading) Install and setup NextPVR (same or different machine). I think that will be difficult. The plugin in the catalog is for the unsupported v4 and won't work with 5.7. I don't think the updated plugin for 4.7 has been released yet, and the one I have on github won't work with 4.7. You could just use an m3u tuner in the meantime. Martin Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now