the-dumb1 121 Posted July 11, 2020 Share Posted July 11, 2020 Hi, I pulled my hard drive out and replaced it with a new drive. I installed Ubuntu 20.04 on the new drive and was successful in installing Emby. I was also successful in pointing it to my media library, but it didn't pick up things like what was favorited or my "persons". I'm pretty sure these are stored somewhere on my old drive. I've got the old drive hooked up to my computer and I can freely navigate it. Just want to know where all the old emby files are located and any tips on how to migrate the old data over to the new computer. If it helps I am a premier subscriber so I have access to all the plugins that may be useful. Thanks! @cayars Link to comment Share on other sites More sharing options...
sfatula 189 Posted July 11, 2020 Share Posted July 11, 2020 Well, the best way (too late now?) to have done it was to use the backup & restore plugin as it restores everything except series timers. Series timers are at /var/lib/emby/data/livetv Link to comment Share on other sites More sharing options...
Carlo 4337 Posted July 12, 2020 Share Posted July 12, 2020 (edited) Have a read through this knowledge base article: https://support.emby.media/support/solutions/articles/44001159936-backup There is a lot of information in that to help. If you want to keep everything you previously had you really want to copy your old set of folders over and then check/change your libraries if any of the paths have changed. Edited July 12, 2020 by cayars Link to comment Share on other sites More sharing options...
Cthalpa 10 Posted July 12, 2020 Share Posted July 12, 2020 Insanely simple: 1) On the old server create a complete backup of /var/lib/emby (e.g. tar -cvf /root/old-emby.tar /var/lib/emby/ -R) 2) Download and install emby on the new server 3) Stop emby on the new server (service emby-server stop) 4) Delete EVERYTHING in the /var/lib/emby folder on the new server 5) Copy the backup file from the old server to the new server 6) Untar (unpack) the backup file into /var/lib/emby on the new server 7) Start emby on the new server (service emby-server start) Done! 1 Link to comment Share on other sites More sharing options...
Luke 37994 Posted July 13, 2020 Share Posted July 13, 2020 Has this helped? Link to comment Share on other sites More sharing options...
the-dumb1 121 Posted July 17, 2020 Author Share Posted July 17, 2020 On 7/13/2020 at 10:50 AM, Luke said: Has this helped? I was able to start up the old system and run a backup using the configuration backup plugin but it didn't bring over the images for the persons/people. I'll have to try the steps above to see if the manual backup makes a difference. Link to comment Share on other sites More sharing options...
Cthalpa 10 Posted July 17, 2020 Share Posted July 17, 2020 8 minutes ago, the-dumb1 said: I was able to start up the old system and run a backup using the configuration backup plugin but it didn't bring over the images for the persons/people. I'll have to try the steps above to see if the manual backup makes a difference. It’s the only Way to do it right! Link to comment Share on other sites More sharing options...
the-dumb1 121 Posted July 17, 2020 Author Share Posted July 17, 2020 4 hours ago, Cthalpa said: It’s the only Way to do it right! Favorites came back which is great. Some of my persons pictures came back, but most are still broken. I suspect I have permissions issues. My media is owned by red and the group is red too. I've added emby to the red group but I'm not sure why it's still broke ... Not sure where to start??? Link to comment Share on other sites More sharing options...
the-dumb1 121 Posted July 17, 2020 Author Share Posted July 17, 2020 One additional thing too ... Emby sees my media but won't play it. Which is why I think there's a permissions issue. Link to comment Share on other sites More sharing options...
Cthalpa 10 Posted July 18, 2020 Share Posted July 18, 2020 2 hours ago, the-dumb1 said: One additional thing too ... Emby sees my media but won't play it. Which is why I think there's a permissions issue. Of course it is, so change permissions accordingly, or change the user that Emby runs as. Link to comment Share on other sites More sharing options...
Luke 37994 Posted July 19, 2020 Share Posted July 19, 2020 Has this helped? Link to comment Share on other sites More sharing options...
the-dumb1 121 Posted July 19, 2020 Author Share Posted July 19, 2020 4 hours ago, Luke said: Has this helped? Ok, so I'm really having trouble. Here's more information. My "media" is really a LUKS-encrypted drive, and so is my main (boot) drive. The media drive is not auto-mounted when I log in, and the login I use is "red" (it is a non-administrative account). I mount the media drive from the GUI and can navigate/access all content without issue. When I try to create a new Library in Emby, pointing it to a directory (say /media/red/filez/Videos), Emby lets me navigate to /media/red but it does not "see" the directory filez. Output of "groups red" includes red itself AND emby, and coincidentally, output of "groups emby" also includes emby itself and red. The owner and group of /media/red and everything beneath it is red:red with at least 77x on every directory, sometimes 775 (note: it is 775 for /media/red/filez for sure). I'm thoroughly confused. Don't know where to start ... but know that I don't want to go back to my old hard drive (it's on its last legs). Link to comment Share on other sites More sharing options...
Carlo 4337 Posted July 20, 2020 Share Posted July 20, 2020 That kind of setup isn't going to work well at all. There should be little need for any type of encryption for a media library and media server. You would be best served to remove the encryption. Link to comment Share on other sites More sharing options...
the-dumb1 121 Posted July 20, 2020 Author Share Posted July 20, 2020 1 hour ago, cayars said: That kind of setup isn't going to work well at all. There should be little need for any type of encryption for a media library and media server. You would be best served to remove the encryption. Do you know what my needs are? It worked fine this way before I installed Ubuntu on a new drive. It's a permissions issue. The logs tell me so; I just don't know how to fix it. Link to comment Share on other sites More sharing options...
the-dumb1 121 Posted July 20, 2020 Author Share Posted July 20, 2020 If I stick my old drive back in, it works fine. So the problem isn't encryption. Link to comment Share on other sites More sharing options...
Luke 37994 Posted July 21, 2020 Share Posted July 21, 2020 On 7/17/2020 at 6:19 PM, the-dumb1 said: One additional thing too ... Emby sees my media but won't play it. Which is why I think there's a permissions issue. Can we please look at an example? Thanks. Link to comment Share on other sites More sharing options...
the-dumb1 121 Posted July 23, 2020 Author Share Posted July 23, 2020 On 7/20/2020 at 7:38 PM, Luke said: Can we please look at an example? Thanks. No, because it's not material I can post without you banning me. The only reason why the library showed up is because I copied over the configuration from my other hard drive using the steps provided in this thread. What should the privileges be of the media folder? Owner/group. 775 red:red is what is now. And emby is in the red group. What should the privileges be of /var/lib/emby be? Owner/group. Link to comment Share on other sites More sharing options...
the-dumb1 121 Posted July 23, 2020 Author Share Posted July 23, 2020 4 hours ago, the-dumb1 said: No, because it's not material I can post without you banning me. The only reason why the library showed up is because I copied over the configuration from my other hard drive using the steps provided in this thread. What should the privileges be of the media folder? Owner/group. 775 red:red is what is now. And emby is in the red group. What should the privileges be of /var/lib/emby be? Owner/group. If you Google, you'll find that a lot of people are having problems with Linux permissions. I found one resource that fixed my issue WITHOUT undoing my encryption. Horrible recommendation that had absolutely nothing to do with the problem. https://emby.media/community/index.php?/topic/29236-linux-permissions-for-emby/ Link to comment Share on other sites More sharing options...
sfatula 189 Posted July 23, 2020 Share Posted July 23, 2020 Would this pinned post not have done the trick? Curious if it is complete. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now