Thedotwin 2 Posted March 8, 2020 Share Posted March 8, 2020 (edited) Hallo zusammen, ich bin noch recht neu mit dem Umgang von Emby, ich habe mir eine Lifetimelizenz zugelegt um gleich alles vollständig zu haben. Emby läuft auf einen kleinen mini PC mit Windows 10 Pro mit 2 Externen Festplatten, diese sind über USB verbunden. Die Ersteinrichtung lief ohne Probleme, beide Platten wurden eingelesen und die Bibliotheken wurden angelegt. Meine Problem: Wenn ich jetzt einen neuen Film auf die Platte kopiere und danach einen Scan der Bibliotheken mache, passiert nichts! Film wird nicht in der Bibliothek angezeigt, auch nicht nach Neustart des Rechners bzw. Emby Server. Alle Filme haben einen eigenen Ordner und liegen im Hauptverzeichnis der Platte ohne Unterordner. Folgende nicht optimale Lösung habe ich festegestellt: Filme auf Platte kopieren und Emby neu instalieren, dann sind alle Filme da. (das kann aber ja nicht die Lösung sein) Könnt ihr mir helfen? ich habe schon einiges nachlesen können (Datum in Klammern setzen, Rechte vergeben, etc, etc,) hat aber alles nichts zur Lösung beigetragen. Vielleicht ist es ja nur eine kleine Sache, wie einen Haken setzen :-) Gruß Dotti Edited March 8, 2020 by Thedotwin Link to comment Share on other sites More sharing options...
Luke 37064 Posted March 9, 2020 Share Posted March 9, 2020 Hi @@Thedotwin, this is a strange one. So you're saying that you can install a fresh emby server, scan your movies, then when the scan is done add another new movie and the new one will not show up? Is that correct? Link to comment Share on other sites More sharing options...
Thedotwin 2 Posted March 9, 2020 Author Share Posted March 9, 2020 Hi @@Luke, That's my approach:1. install emby server.2. create the libraries.3. create the users.after the scan, it's all there.a week later other one day:1. copy a new movie to the HDD.2. scan the libraries.3. movie is not added to the library.previous solution:1. copy the movie to disk.2. run the emby installation again.3. scan the libraries.4. the new movie is in the library regards Dotti Link to comment Share on other sites More sharing options...
Luke 37064 Posted March 9, 2020 Share Posted March 9, 2020 What version of Emby Server? Link to comment Share on other sites More sharing options...
Thedotwin 2 Posted March 9, 2020 Author Share Posted March 9, 2020 Link to comment Share on other sites More sharing options...
pünktchen 1258 Posted March 9, 2020 Share Posted March 9, 2020 Ändert sich bei dir vielleicht der Laufwerksbuchstabe der externen Festplatten? Link to comment Share on other sites More sharing options...
Thedotwin 2 Posted March 9, 2020 Author Share Posted March 9, 2020 leider nein, die bleiben wie sie sind. Man würde sonst die bereits bestehenden Filme auch nicht schauen können, da der Pfad ja festgelegt ist. Link to comment Share on other sites More sharing options...
Hiraka 2 Posted March 10, 2020 Share Posted March 10, 2020 Hallo zusammen, ich bin noch recht neu mit dem Umgang von Emby, ich habe mir eine Lifetimelizenz zugelegt um gleich alles vollständig zu haben. Emby läuft auf einen kleinen mini PC mit Windows 10 Pro mit 2 Externen Festplatten, diese sind über USB verbunden. Die Ersteinrichtung lief ohne Probleme, beide Platten wurden eingelesen und die Bibliotheken wurden angelegt. Meine Problem: Wenn ich jetzt einen neuen Film auf die Platte kopiere und danach einen Scan der Bibliotheken mache, passiert nichts! Film wird nicht in der Bibliothek angezeigt, auch nicht nach Neustart des Rechners bzw. Emby Server. Alle Filme haben einen eigenen Ordner und liegen im Hauptverzeichnis der Platte ohne Unterordner. Folgende nicht optimale Lösung habe ich festegestellt: Filme auf Platte kopieren und Emby neu instalieren, dann sind alle Filme da. (das kann aber ja nicht die Lösung sein) Könnt ihr mir helfen? ich habe schon einiges nachlesen können (Datum in Klammern setzen, Rechte vergeben, etc, etc,) hat aber alles nichts zur Lösung beigetragen. Vielleicht ist es ja nur eine kleine Sache, wie einen Haken setzen :-) Gruß Dotti Hi Dotti, You said, you use a mini PC with win 10? What are the power settings in general? I just wonder if there is a problem once the USB Port or Harddrive goes into power saving or sleep mode? Have you installed the correct USB driver? Where is emby's database saved, on the external HDD? Link to comment Share on other sites More sharing options...
Thedotwin 2 Posted March 10, 2020 Author Share Posted March 10, 2020 @Luke 6 libraries, the folders are directly on the hard disk, e.g. HHD-> Batman->Movie file @@Hiraka Disks do not power down, power mode is disabled.I'm copying the movie, the disks are working as active, but then the scan is without result. Link to comment Share on other sites More sharing options...
Luke 37064 Posted March 10, 2020 Share Posted March 10, 2020 How many emby libraries have you created? How are your movie files organized? Link to comment Share on other sites More sharing options...
Thedotwin 2 Posted March 10, 2020 Author Share Posted March 10, 2020 @Luke 6 libraries the folders are directly on the hard disk, e.g. HHD-> Batman->Movie file Link to comment Share on other sites More sharing options...
Hiraka 2 Posted March 10, 2020 Share Posted March 10, 2020 (edited) @Luke 6 libraries, the folders are directly on the hard disk, e.g. HHD-> Batman->Movie file @@Hiraka Disks do not power down, power mode is disabled. I'm copying the movie, the disks are working as active, but then the scan is without result. Just to verify, do you have an internal HDD as well or just external HDDs via USB? If so, can you temporarily create a library on the internal HDD and add 2 or 3 videos? Add only one video per new scan, and see if it pops up in the media library Edited March 10, 2020 by Hiraka Link to comment Share on other sites More sharing options...
Thedotwin 2 Posted March 10, 2020 Author Share Posted March 10, 2020 Have tested it, add internal SDD ok, add external USB HDD not ok.why not? don't get it. Link to comment Share on other sites More sharing options...
Hiraka 2 Posted March 11, 2020 Share Posted March 11, 2020 (edited) Have tested it, add internal SDD ok, add external USB HDD not ok. why not? don't get it. Well, it could have a few reason. Now as we know that the library and emby works fine, we might want to look closer at your drives and USB ports... What type of external drives you got (Seagate Expansion, WD Passport etc.?) How are the drives formatted? (NTFS, exFAT) Can you check that your USB selective suspend power settings is set to "disabled"? In my experience, using the USB as a permanent attached storage solution can cause problems. Another test and error could be trying to mount your external drive as a folder rather then using drive letters. Create a new library in that mounted folder and then scan and see what happens. Edited March 11, 2020 by Hiraka 1 Link to comment Share on other sites More sharing options...
Thedotwin 2 Posted March 11, 2020 Author Share Posted March 11, 2020 ok, I'll check and test it. Link to comment Share on other sites More sharing options...
Thedotwin 2 Posted March 11, 2020 Author Share Posted March 11, 2020 did not work, the usb disks are not updated the libraries Link to comment Share on other sites More sharing options...
Hiraka 2 Posted March 11, 2020 Share Posted March 11, 2020 did not work, the usb disks are not updated the libraries Hi Dott, okay, can you describe a little bit more what you did? Give some more details about what you tried... Also give some more details about your system... You can write it in German... Link to comment Share on other sites More sharing options...
Thedotwin 2 Posted March 11, 2020 Author Share Posted March 11, 2020 Im Prinzip ganz einfach, Ich habe Emby installiert. 4 Bibliotheken angelegt. Die Filme sind auf zwei externen USB-Laufwerken. Bibliotheken gescannt, alle Filme erkannt. 2 Tagen später einen neuen Film auf die HDD kopiert. Bibliotheken erneut gescannt, Film erscheint aber nicht in der Bibliothek. Film auf die andere externe HDD kopiert, auch dort wird der Film nicht erkannt. Film zum Test auf interne HDD kopiert, Film wird erkannt. Energie Verwaltung ist deaktiviert, Rechner und HDD gehen nicht in den Ruhe Modus. Wie von dir beschrieben, USB & PCI Express Energie deaktiviert (siehe Screenshots) Rechner neu gestartet. Link to comment Share on other sites More sharing options...
Hiraka 2 Posted March 11, 2020 Share Posted March 11, 2020 (edited) Hi Dot, Thanks for clearing this up. I know this might get a bit frustrating but somehow I feel like we are on the right track. As I was suggesting to try the folder mounting as well, can you please try the following. Move all your movies to the spare external HDD. Use now the empty external HDD which dosen't have any movies on it and format it to NTFS again. (Rechts click Formatieren) Go to Disk Management and select the empty external drive. Right-Click on that drive and select change Drive letter or path. Click Add and select "Mount to the following empty NTFS Folder" Create a folder on the C Drive. To do that, click New Folder and create a folder somewhere simple like C:\MovieArchive\ExternalDrive01. Something you remember that this folder is your external HDD. Click OK Ensure that the shown path matches what you created in step 6. Remove the Drive letter from this external drive. You can do that in the same window by selecting the drive letter (e.g E:) and click remove. Click ok Now you have a C Drive Folder which is mounted to your external drive. This might does the trick as creating libraries on C Drive worked before. In Emby, create a new Library and use the external hdd mounted folder e.g. C:\MovieArchive\ExternalDrive01. Once that is done, copy a movie to C:\MovieArchive\ExternalDrive01 and see if that pops up in your library as new movie. Let me know how that goes. I also recommand to change the Energy Settings from "Ausbalanciert" to High Performance. If you don't have High Performance as an option, let me know as I can attach you the engery cfg for that. If you get stuck, let me know. I will attach some screenshots later. However, just remember before you format the external drive, backup your movies by moving them to your spare external HDD. Edited March 11, 2020 by Hiraka 1 Link to comment Share on other sites More sharing options...
Thedotwin 2 Posted March 12, 2020 Author Share Posted March 12, 2020 (edited) Hi Hiraka, alles wie beschrieben gemacht, bis auf eine Sache läuft es soweit. Ich habe jetzt 4 Bibliotheken siehe Bild 1, (Movies, Animation, Diverse, 3D Movies) alle Biblotheken aktualisieren sich, bis auf eine (Movies). Pfad habe geprüft ist in Ordnung, sie wird jetzt als leere Bibliothek angezeigt siehe Bild 2. Die Movie Bibliothek ist die größte mit über 400 Filmen, gibt es vielleicht eine Begrenzung? oder ähnliches? Bild1 Bild 2 Edited March 12, 2020 by Thedotwin Link to comment Share on other sites More sharing options...
Hiraka 2 Posted March 12, 2020 Share Posted March 12, 2020 (edited) Hi Dott, Good so we have some success. And thats interesting. Have you just replaced/changed the path of this library to the new mounted folder or have you deleted it and added a new library? And have you restart emby? Can you test by dividing your library into a recommended folder structure like given in the emby wiki. I don't think there is a library size limitation. At least not something in the 400. I would think the limitation is based on the file system which is by NTFS not the file count in one subfolder, it's the total amount in the whole system and as far I remember it's something in the 4 Billion. However, a database has its limitation depending on its design. If there are too many entities, it will reduce performance but again I don't think 400 is the number. Can you try this Move all movies into a different folder which is not indexed by emby. Create for that an another folder. e.g. C:\MovieArchive\ExternalStorage01\tempmovies Delete the "Movie" library in emby. Restart Emby Create a new Movie Folder, and use the recommended structure. Move all movies starting with A from the tempmovies folder into a subfolder "A" e.g. C:\MovieArchive\ExternalStorage01\Movies\A\Movietitle.mp4 Add the root folder as a new Movie folder in Emby e.g C:\MovieArchive\ExternalStorage01\Movies Scan the Movie Folder and check if movies are added to the library. If all movies starting with A are added, create subfolders B to Z and add movies to those folders and scan the movie folder in emby. (right click on the emby library and click Scan library) Make sure you have real time monitoring enabled as well. Edited March 12, 2020 by Hiraka Link to comment Share on other sites More sharing options...
Thedotwin 2 Posted March 12, 2020 Author Share Posted March 12, 2020 ok, ist etwas Arbeit, melde mich wieder :-) Link to comment Share on other sites More sharing options...
Thedotwin 2 Posted March 14, 2020 Author Share Posted March 14, 2020 so war etwas Arbeit, hat aber leider nicht zum Erfolg geführt. Ich habe den Emby Server nun neu installiert und alle Bibliotheken waren wieder vollständig. Beim Hinzufügen von Filmen werden diese nur in den kleinen Bibliotheken erkannt und hinzugefügt, bei der größeren funktioniert es nicht. Als letztes habe ich nun die Hälfte der Filme auf eine andere Platte kopiert, das hat aber auch nicht zum Erfolg geführt. Link to comment Share on other sites More sharing options...
Luke 37064 Posted March 19, 2020 Share Posted March 19, 2020 @@Thedotwin Hallo, welche Ordner haben Sie zu jeder Filmbibliothek hinzugefügt? Gibt es Duplikate? Link to comment Share on other sites More sharing options...
Thedotwin 2 Posted March 25, 2020 Author Share Posted March 25, 2020 Hallo zusammen, ich habe nun das ganze System neu aufgesetzt und es läuft soweit alles. Sollte der Fehler noch mal auftauchen dann melde ich mich dazu noch mal. DANKE für die Unterstützung. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now