Tdelfin 0 Posted January 20, 2020 Share Posted January 20, 2020 Hello, I updated emby server module on my Thecus N2810 from 3.2.8.1 to 4.4.0.7beta and had the server up and running. But I noticed that the emby server is reset back to 3.2.8.1(OutkastM) after a scheduled shut-down. Is there a way to make the emby server update permanent? Thanks! Link to comment Share on other sites More sharing options...
Luke 37064 Posted January 20, 2020 Share Posted January 20, 2020 Hi, can you remove the 3.2.8 install? They're actually two separate things I would think. Our package was developed independently. Link to comment Share on other sites More sharing options...
Tdelfin 0 Posted January 20, 2020 Author Share Posted January 20, 2020 Hi luke,Thank you for your fast reply. I can uninstall the emby server if that what your asking?And after unstalling load the module via Manual Install? Link to comment Share on other sites More sharing options...
Luke 37064 Posted January 20, 2020 Share Posted January 20, 2020 I think so, yes. I'm not sure what impact having Outkast's version side by side will have. Link to comment Share on other sites More sharing options...
Tdelfin 0 Posted January 20, 2020 Author Share Posted January 20, 2020 I uninstalled the emby server and loaded the new emby server module via Manual Install.Only after doing so I only see Emby server 3.2.8.1 (OutkastM) in available Thecus app list.Should the ne module also be visable in that same list? Link to comment Share on other sites More sharing options...
Luke 37064 Posted January 20, 2020 Share Posted January 20, 2020 No because we're not listed in the Thecus app store yet. You need to sideload using the instructions on our website: https://emby.media/nas-server.html Link to comment Share on other sites More sharing options...
Tdelfin 0 Posted January 20, 2020 Author Share Posted January 20, 2020 Hi Luke, thank for your help I think I got it.Installed only your module and got to server dashboard via browser. Have good one! Link to comment Share on other sites More sharing options...
Luke 37064 Posted January 20, 2020 Share Posted January 20, 2020 Thanks for the feedback. Link to comment Share on other sites More sharing options...
Tdelfin 0 Posted January 23, 2020 Author Share Posted January 23, 2020 (edited) Hi Luke, I like to know how I can start the emby server after an scheduled power down. At this moment I use the upload module method to install latest Beta module and then it will also start the emby server. Is there maybe a way to make a emby shortcut on the desktop?Thanks! Edited January 26, 2020 by Tdelfin Link to comment Share on other sites More sharing options...
Tdelfin 0 Posted February 1, 2020 Author Share Posted February 1, 2020 (edited) Hi Luke,I noticed after installing latest beta (emby-server-thecus_4.4.0.11_x86_64) that there is a new "EmbyServer" module visable. Thank you for this! And now I am able to make a thecus desktop shortcut to it. I noticed that the shortcut is trying to open the http web interface. But sadly it can't reach the webpage because the Emby server isn't started yet. When I used the Emby server module from OutkastM there was option to start the server. I think it was at the Application control option. If I could have this option back I think could start the server from there. Thanks! Edited February 1, 2020 by Tdelfin Link to comment Share on other sites More sharing options...
Luke 37064 Posted February 3, 2020 Share Posted February 3, 2020 And now I am able to make a thecus desktop shortcut to it. I noticed that the shortcut is trying to open the http web interface. But sadly it can't reach the webpage because the Emby server isn't started yet. I don't quite understand. Why not just wait for the server to finish starting? Link to comment Share on other sites More sharing options...
Tdelfin 0 Posted February 3, 2020 Author Share Posted February 3, 2020 Sorry, I think we don't understand each other. Because how do I know it is starting the emby server while the browser is telling me it can't connect to the server adress? Example:I shutdown my nas and then restarted it again. From the desktop I use the EmbyServer shortcut and it opens my opera webbrowser.Then the webbrowser wants to connect to http://192.168.0.200:8096 only it telling me it can't connect! "Site is unreacheable" etc.. At that moment I waited for awhile and refreshed the page only nothing seems to happen? How am I able to tell that the server is starting in the background? If I re-install the EmbySever module via manual install the server is started right away. So I don't understand why it would take so long by using the desktop shortcut?And therefore I have metioned OutkastM solution so I can start the server from that Emby screen. Link to comment Share on other sites More sharing options...
Luke 37064 Posted February 4, 2020 Share Posted February 4, 2020 How did you create the shortcut? Link to comment Share on other sites More sharing options...
Tdelfin 0 Posted February 5, 2020 Author Share Posted February 5, 2020 Link to comment Share on other sites More sharing options...
Luke 37064 Posted February 19, 2020 Share Posted February 19, 2020 @@Tdelfin are you still having an issue with this? Link to comment Share on other sites More sharing options...
Tdelfin 0 Posted February 20, 2020 Author Share Posted February 20, 2020 Hi Luke, At this moment I am running latest Beta "emby-server-thecus_4.4.0.15_x86_64.mod" and it seems that the server is running after the scheduled shutdown. So I think the problem is solved now. Thank you for your help and the emby updates! Link to comment Share on other sites More sharing options...
Luke 37064 Posted February 22, 2020 Share Posted February 22, 2020 Interesting, thanks for the feedback. Link to comment Share on other sites More sharing options...
Tdelfin 0 Posted February 22, 2020 Author Share Posted February 22, 2020 (edited) Hi Luke, I thought the problem was solved but it isn't . Because today I did see the server didn't start automaticaly when my Thecus was powered on (for several hours). I maybe thought it was solved because I forgot that I uploaded the new emby server application to my NAS that day. In the meantime I will try every new Emby BETA build to see what happens and start the server in that way.Thanks! Edited February 22, 2020 by Tdelfin Link to comment Share on other sites More sharing options...
Luke 37064 Posted February 22, 2020 Share Posted February 22, 2020 But you can still start manually? Link to comment Share on other sites More sharing options...
Tdelfin 0 Posted February 23, 2020 Author Share Posted February 23, 2020 When I want to start the Emby server I upload the Emby server module from your website (thecus x64 beta).After installing the module the emby server will also automaticaly start.I don't know how to start the Emby server in a different way because the shortcut only tries to open the server adress which it can't reach.Do you have a solution to manually start the emby server? Link to comment Share on other sites More sharing options...
outkastm 8 Posted March 19, 2020 Share Posted March 19, 2020 On my N5810 it start perfectly and automatically after restart, i don't think is an issue with the Emby module. You can do a test: stop all you running modules except Emby check if the Emby is well accessible restart the NAS and see if the Emby is started automatically. Maybe you have a module which is stuck on the startup process and it blocks other modules in the queue for starting. Link to comment Share on other sites More sharing options...
Luke 37064 Posted March 19, 2020 Share Posted March 19, 2020 @@Tdelfin, please let us know if this helps. Thanks ! Link to comment Share on other sites More sharing options...
Luke 37064 Posted March 21, 2020 Share Posted March 21, 2020 @@Tdelfin can you attach an emby server log? We think there's a chance the server is crashing. Thanks. Link to comment Share on other sites More sharing options...
Tdelfin 0 Posted March 21, 2020 Author Share Posted March 21, 2020 Hi Outkastm,Thank you for your reply and your possible solution. In the meantime I have like asked uninstalled several not needed modules and deactivated module FFmpeg and mono. Then I installed latest Emby beta 4.4.0.30. And this module is the only active module on my NAS right now. Did the test and rebooted the NAS. Sadly the Emby server did not start automaticaly. However I did find a new way to start te Emby server. When I deactivate the Emby server module and then activate it the server will start. @@LukeI have enabled debug logging and rebooted the NAS again.Because server didn't start I deactivated the module and activated it again to start it.Then I saved the Emby server log file.Thanks! embyserver.txt embyserver-63720392271.txt Link to comment Share on other sites More sharing options...
Luke 37064 Posted March 26, 2020 Share Posted March 26, 2020 Because server didn't start I deactivated the module and activated it again to start it. Ok so now you know how to start it? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now