Luke 37273 Posted December 16, 2019 Share Posted December 16, 2019 Even if we did, we don't have evidence yet that it will help you. What you could try is a new portable install just for testing purposes, this way you can leave your current installation as-is. Link to comment Share on other sites More sharing options...
MBSki 1035 Posted December 16, 2019 Author Share Posted December 16, 2019 Yea, I think I'll do that. Got an old laptop that I'll wipe and test out. Gonna start by installing Serviio and PlayOn, then Emby and see if i have the same problem. Btw, can't remember if i mentioned this, but I do see the server for 1 time in the Denon app. If i close the Denon app, and reopen Emby is gone. So it works once, but not a second time. That just seems really odd to me and don't understand how the firewall would allow it once, but not a 2nd time. Also, when i installed i didn't check "Public" network. Is there something that doesn't get configured when i don't check allow on "Public"? Link to comment Share on other sites More sharing options...
Luke 37273 Posted December 16, 2019 Share Posted December 16, 2019 You could do a portable install on the same machine as well so that you don't have to impact your current install. Just shut it down, download our portable zip, unzip and run embyserver.exe. Link to comment Share on other sites More sharing options...
Luke 37273 Posted December 16, 2019 Share Posted December 16, 2019 If i close the Denon app, and reopen Emby is gone. So it works once, but not a second time. You could try lowering the blast message interval in dlna settings. I think the default is every 5 or 10 minutes. You could try setting it to one minute. Link to comment Share on other sites More sharing options...
MBSki 1035 Posted December 16, 2019 Author Share Posted December 16, 2019 Didn't know that about the portable install, thanks. And, yes, i played with the blast interval before, but it didn't work. Knocked it down to 5 seconds this time after reading about someone else experiencing the same issue in July and it DID work!! Pushed it to 1 minute, and it didn't work so finally settled on 15 seconds. Not ideal, but that time is literally the max time I have to wait for Emby to appear in the Denon app. It could be less, but there's no guarantee unless I push it down to 15 or less. So, is that my solution? Seems like a really low number, but I can use it for now. Back in July there was a suggestion that DLNA improvements were needed. Is it still possible that some more tweaking to DLNA is still needed? And thanks for your help. Really appreciate it. Link to comment Share on other sites More sharing options...
Luke 37273 Posted December 16, 2019 Share Posted December 16, 2019 It should work with higher intervals, it just means you'll have to wait longer before it will show up. Link to comment Share on other sites More sharing options...
MBSki 1035 Posted December 16, 2019 Author Share Posted December 16, 2019 Yes, true, but I'm not that patient. I think i'll keep it like this for awhile at 15 seconds. Hopefully it's not creating that much network traffic for it to be a problem. I think I might actually be good to go. Thank you again. Link to comment Share on other sites More sharing options...
Luke 37273 Posted December 16, 2019 Share Posted December 16, 2019 I think that's a bit much personally so keep an eye on whether or not resource utilization of the emby server process goes up due to this. Link to comment Share on other sites More sharing options...
MBSki 1035 Posted December 16, 2019 Author Share Posted December 16, 2019 Ah, ok. CPU, Disk, and network is really low right now and memory is at 140 MB. If it starts to get out of control I'll report back here. 1 Link to comment Share on other sites More sharing options...
DSFF 0 Posted June 2, 2020 Share Posted June 2, 2020 I have the same problem Emby is work only with "Port Forwarding" I have spent many hours, I would probably say Days ...., trying to activate UPNP to router and mac (macOS 10.15.4). But nothing, It just doesn't work in the emby version 4.4.2.0. Link to comment Share on other sites More sharing options...
Luke 37273 Posted June 2, 2020 Share Posted June 2, 2020 I have the same problem Emby is work only with "Port Forwarding" I have spent many hours, I would probably say Days ...., trying to activate UPNP to router and mac (macOS 10.15.4). But nothing, It just doesn't work in the emby version 4.4.2.0. Hi there, what kind of router do you have? Link to comment Share on other sites More sharing options...
DSFF 0 Posted June 2, 2020 Share Posted June 2, 2020 Hi there, what kind of router do you have? router: Speedport Plus Firmware version :09022001.00.030_OTE3 Link to comment Share on other sites More sharing options...
Luke 37273 Posted June 3, 2020 Share Posted June 3, 2020 Can you please attach the emby server log? thanks. 1 Link to comment Share on other sites More sharing options...
DSFF 0 Posted June 3, 2020 Share Posted June 3, 2020 That's it! hardware_detection-63726824871.txt embyserver-63726825599.txt embyserver.txt Link to comment Share on other sites More sharing options...
Luke 37273 Posted June 4, 2020 Share Posted June 4, 2020 That's it! Do you have the port mapper option enabled in emby server network settings? Link to comment Share on other sites More sharing options...
DSFF 0 Posted June 4, 2020 Share Posted June 4, 2020 Do you have the port mapper option enabled in emby server network settings? I have test it in two deferent router ( with enable upnp) but nothing Link to comment Share on other sites More sharing options...
Luke 37273 Posted June 6, 2020 Share Posted June 6, 2020 Do you have the port mapper option enabled in emby server network settings? Link to comment Share on other sites More sharing options...
DSFF 0 Posted June 6, 2020 Share Posted June 6, 2020 yes, it is not my first time to make a emby server, but after 2020, it was not able to work with upnp Link to comment Share on other sites More sharing options...
Luke 37273 Posted June 6, 2020 Share Posted June 6, 2020 Are you able to configure port forwarding in your router? Link to comment Share on other sites More sharing options...
DSFF 0 Posted June 6, 2020 Share Posted June 6, 2020 Finally yes, I have open manual port , in router Link to comment Share on other sites More sharing options...
Luke 37273 Posted June 7, 2020 Share Posted June 7, 2020 Thanks for the feedback. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now