wp.rauchholz 5 Posted December 8, 2019 Share Posted December 8, 2019 Is there a Howto that explains config of DLNA devices? I do have 4 Yamaha speakers (WX-010/030) on my network. Same network where emby server is located. I can ping the speakers and can also acess them through the web, but I don't see them in emby. Thanks for you help. Wolfgang Link to comment Share on other sites More sharing options...
Luke 37064 Posted December 8, 2019 Share Posted December 8, 2019 Hi there, can you try powering the speakers off and then back on while emby server is running? Please see if that helps. Thanks. Link to comment Share on other sites More sharing options...
wp.rauchholz 5 Posted December 9, 2019 Author Share Posted December 9, 2019 Hi Bazinga! thanks for your answer. This does not help. Link to comment Share on other sites More sharing options...
Luke 37064 Posted December 9, 2019 Share Posted December 9, 2019 Please attach the emby server log. thanks. Link to comment Share on other sites More sharing options...
wp.rauchholz 5 Posted December 10, 2019 Author Share Posted December 10, 2019 (edited) Here is the log. Thank you, Wolfgang emby.txt Edited December 10, 2019 by wp.rauchholz Link to comment Share on other sites More sharing options...
Luke 37064 Posted December 10, 2019 Share Posted December 10, 2019 Did you power off and back on the speakers during the time of this log file? 1 Link to comment Share on other sites More sharing options...
wp.rauchholz 5 Posted December 11, 2019 Author Share Posted December 11, 2019 No I had not. For this file, I unplugged one louspeaker and fired it up again. I can see these speakers in appleTV. Concerning firewall; port 1900 UDP is open. Wolfgang embyserver.txt Link to comment Share on other sites More sharing options...
Luke 37064 Posted December 11, 2019 Share Posted December 11, 2019 Ok that's strange. You may want to double check the firewall because this log has no mention of the Yamaha speakers ever being detected. What Dlna features do they support? Link to comment Share on other sites More sharing options...
wp.rauchholz 5 Posted December 12, 2019 Author Share Posted December 12, 2019 This is a copy/paste from the manual: "Plays various supported content with high quality sound• Plays music from DLNA servers/Internet radio (☞ P.17), AirPlay and Bluetooth" Firewall: Emby is installed on my homeserver (CENTOS 7). Has an external NIC and an internal NIC for the LAN. All devices are on the LAN This is the part of the firewall that opens the port on the internal NIC: iptables -A INPUT -i $INT_DEV -p udp -m state --state NEW -m udp --dport 1900 -j ACCEPT That is what I get when running: iptables -nvL | grep 1900 --> 126 19834 ACCEPT udp -- enp3s0 * 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:1900 Can you see anything wrong here? Thanks, Wolfgang Link to comment Share on other sites More sharing options...
Luke 37064 Posted December 12, 2019 Share Posted December 12, 2019 So then maybe it doesn't support play to which is why you don't see them in emby. So then you have to browse emby server content from the Yamaha. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now