Anyone use MCE STandby tool?

[Deihmos 160]

When my PC that host all my media wakes up because another client set a wake request from MBC it never goes back to sleep. I was trying to use the MCE standby tool but it puts the PC even when another client is accessing files. 

 

Anyone familiar with this app and know of a way to prevent it from going in standby when sharing media?

[Koleckai Silvestri 1151]

I've never used the tool. Had similar problems to you in the past and I just made it so my server never sleeps now. Monitors will shut off and drives will spin down but the machine never actually sleeps.

[Deihmos 160]

It cost about 10 bucks a month to leave it on 24/7. Not worth it.

 

Edited June 12, 2014 by Deihmos

[Tester 45]

I personally think it is worth it and have since this tool for 3 years, could never have my HTPC working as it is without it.. 

Unfortunately the tool does not support inbound/outbound traffic detection, was something that was never added due to the owner dropping the project.

For this you can use this tool, it will keep HTPC awake if there is traffic.

 

http://sourceforge.net/projects/coffee-sc/

[Deihmos 160]

I personally think it is worth it and have since this tool for 3 years, could never have my HTPC working as it is without it..

Unfortunately the tool does not support inbound/outbound traffic detection, was something that was never added due to the owner dropping the project.

For this you can use this tool, it will keep HTPC awake if there is traffic.

http://sourceforge.net/projects/coffee-sc/

What I mean it isn't worth it for me to leave the PC on 24/7. I will take a look at this. Thanks. Edited June 13, 2014 by Deihmos

[Deihmos 160]

I finally figured this app out. Now the server stays awake when sharing media then sleeps when done. It can also keep the PC awake when a certain app is running. No more PC insomnia.

Edited June 15, 2014 by Deihmos

[Koleckai Silvestri 1151]

It cost about 10 bucks a month to leave it on 24/7. Not worth it.

 

 

Hmmm...

 

My monthly electric bill is $80 a month in the winter and there are 6 computers in the house that rarely go to sleep and are never turned off. $10/month seems like a stretch. The bill does rise to about $300 a month in the summer but that is due to the air conditioning.

[Deihmos 160]

The rate depends on where you live as some states have much lower rates than others. Take your total bill and divide it by your usage to get the rate.

I have something that tells me how much power my pc uses and it was about 40-45 watts. Just imagine what your bill would be if you let your pc sleep when not in use. Could probably be saving at least $20+ a month.

 

 

 

Sent from my HTC One_M8 using Tapatalk

Edited June 15, 2014 by Deihmos

[Koleckai Silvestri 1151]

I understand California has some of the highest rates. Maybe. In April, I used 466 kilowatt hours total. Cost between 13 cents and 27 cents an hour. This is for a three bedroom, two story house with 4 adults living in it more than 50% of the time.

 

Oh well not a big deal, glad you found a solution.

[Spaceboy 2565]

I couldn't get this to work reliably. Not just the program, but hardware resuming from sleep can have issues. For me stability is absolutely key so my server is always on and all other devices I'm using are low powered

 

 

Sent from my iPad using Tapatalk

[Tester 45]

Deihmos, how exactly did you end up getting it all working ?

[Deihmos 160]

Deihmos, how exactly did you end up getting it all working ?

 

The only issue I had was that it would sleep the server when it was streaming. It turns out that the developer already has something to prevent it but just for a homegroup which I don't use. All I did was add the names of my clients to the registry and now the server would not sleep if another client is streaming. Since MBC has built in wake on lan it works out to be the perfect solution.

 

I never had an issue with resuming from sleep just that it would not return to sleep reliably and stay on all night. I don't need my PC on all night doing nothing.

 

 

 

This version also is able to respect custom network sessions and does not suspend if one of them is in use. They can be entered just like the custom executables by creating a registry value at the following locations:

 

HKLM\SOFTWARE\Herman van Eijk\MceStandbyTool\Non Idle Networksessions

 

To figure out which sessions are in use open a command prompt with administrator rights and execute the following command:

 

net sessions

 

A value for homegroup sharing is already defined, so MST will not suspend the system when another PC plays recordings from it.

 

Edited June 16, 2014 by Deihmos

[Tester 45]

Nice work, thanks for the info.

[ireme 11]

Deihmos , sorry but adding HKLM\SOFTWARE\Herman van Eijk\MceStandbyTool\"Non Idle Networksessions" key, MCE  keeps sleeping (in my case after 30 minutes) despite having two clients doing streaming.
Should put some other value in the registry? When you say "All I did was add the names of my clients to the registry" means to add in the "Non Idle Networksessions" key the names of streaming devices?, f.example GT-P5110 for my tablet?

Thanks in advance

Edited September 21, 2014 by ireme

[Deihmos 160]

What kind of device are you streaming to? Use the command net sessions when sharing to get the names.

[ireme 11]

The Net sessions command reports none entry, while my tablet that uses the Android application makes streaming from MediaBrowser Server.

But if the streaming it's using WebBrowser then shows:

 

 

C:\>net sessions

Equipo                 Usuario              Tipo cliente    Abre tiempo inact.

-------------------------------------------------------------------------------
\\[fe80::b14c:9377:a...MediaCenter                                1 00:00:18
 

 

Mediacenter is the computer name where is MediaBrowser Server

[Deihmos 160]

What I suggested will only work for direct plays from your shared folders. Your tablet isn't accessing your files directly and wouldn't register as a net session.

[ireme 11]

Thanks a lot Delhmos, I was going crazy.

I have to think of a solution and discard the MCE Standby tool, since the developer has abandoned the project.

[jdtayloruk 0]

I was finding my computer wasn't going to sleep either or if it was the computer woke up almost immediately and kept doing that several times, I just don't know how to solve it myself either.

[Deihmos 160]

That sounds like your network card is waking the PC. Check the power settings in device e manager and select only allow a magic packet to wake the PC.