softworkz 3349 Posted August 18, 2019 Share Posted August 18, 2019 @@bshaf - What do you mean exactly by "crashing"? Does the Emby server process exit? Is there any entry in the event log documenting the crash? Link to comment Share on other sites More sharing options...
bshaf 4 Posted August 19, 2019 Author Share Posted August 19, 2019 @@softworkz - yeah, i guess crash may not be the right term. Essentially when i tune to a cable channel from a client it may strem video for a second or two then it will freeze and stop. No clients will be able to connect till i re-start the server. If i remote into my windows server i can see the emby server process consuming much higher CPU then normal and over 5gb of memory (there is a screenshot on the first post). Normally Emby consumes around 200mb of memory. I've let the server run like this for 5 or 10 minutes just to see what happens. The process doesn't appear to exit, so maybe crash isn't the right term. But it essentially ceases to function. I haven't seen an entry in the windows event log yet. Link to comment Share on other sites More sharing options...
softworkz 3349 Posted August 19, 2019 Share Posted August 19, 2019 Would you be able to give me access to the stream (privately of course) for testing? Link to comment Share on other sites More sharing options...
bshaf 4 Posted August 19, 2019 Author Share Posted August 19, 2019 Yes, I'll send it over tomorrow. I recorded one of the cable channels last week till it froze and the connection dropped. After i rebooted the server i played the recording and it didn't have an issue. So you may not be able to replicate the issue Link to comment Share on other sites More sharing options...
Solution softworkz 3349 Posted August 19, 2019 Solution Share Posted August 19, 2019 @@bshaf - Thanks for sending the recorded stream! The exception occurred due to malformed stream data, but I as able to fix this in our code to be tolerant for that case. The fix should be included in the next beta. 1 Link to comment Share on other sites More sharing options...
bshaf 4 Posted August 19, 2019 Author Share Posted August 19, 2019 @@softworkz - OMG! Thank you sooo much!!! You are amazing! Should I send a couple other examples from other channels to see if there are other permutations? Link to comment Share on other sites More sharing options...
softworkz 3349 Posted August 19, 2019 Share Posted August 19, 2019 You're welcome. Let's see how it goes with the next beta. PS: There's no need for other channel recordings right now Link to comment Share on other sites More sharing options...
bshaf 4 Posted August 22, 2019 Author Share Posted August 22, 2019 Ok. Got it. Do you know if something changed in the code around the end of July that caused this (around release 4.2.0.40)? Because its been working pretty solid for over a year. If it wasn't the Emby server code that changed to cause this, i think there was a Silicon Dust firmware update that may have changed the structure of the stream. If you're not sure, no big deal. I was just curious since the issue popped out of no where. Link to comment Share on other sites More sharing options...
softworkz 3349 Posted August 22, 2019 Share Posted August 22, 2019 In 4.2 there were some changes added for fixing timestamp problems. Unfortunately there's no option to disable this, so we can't be sure whether it's been caused by this. A new beta 4.3.0.5 has been released. Please try and see if that fixes the issue. Link to comment Share on other sites More sharing options...
bshaf 4 Posted August 22, 2019 Author Share Posted August 22, 2019 (edited) Ok. I'm partially embarressed to ask, but how do you install the beta? I've downloaded the .7z file and unzipped it, but there is not installer. Do i need to unintalled the current version? The other question is how do I get back on the stable release once it's out? I've searched the wiki, FAQ, testing area, GitHub and various other areas on the forum to how to do this and i couldn't find anything (which means its probably pretty obvious). Edited August 22, 2019 by bshaf Link to comment Share on other sites More sharing options...
Happy2Play 8356 Posted August 22, 2019 Share Posted August 22, 2019 (edited) Ok. I'm partially embarressed to ask, but how do you install the beta? I've downloaded the .7z file and unzipped it, but there is not installer. Do i need to unintalled the current version? The other question is how do I get back on the stable release once it's out? I've searched the wiki, FAQ, testing area, GitHub and various other areas on the forum to how to do this and i couldn't find anything (which means its probably pretty obvious). Use the installer on the Download page (labeled Beta Channel). https://emby.media/windows-server.html Note you have to remain on the beta channel until stable versioning meets or exceed beta version numbering. Then you have to use the stable installer to switch back to stable versioning. Edited August 22, 2019 by Happy2Play Link to comment Share on other sites More sharing options...
bshaf 4 Posted August 22, 2019 Author Share Posted August 22, 2019 Nevermind. I think i figured it out. Sorry. Link to comment Share on other sites More sharing options...
bshaf 4 Posted August 22, 2019 Author Share Posted August 22, 2019 @softworkz - yep that fixed it. Ran the beta and was able to watch one of the 'bad channels' for over 2 hours with no issue. Thanks again!! Link to comment Share on other sites More sharing options...
Luke 37254 Posted August 22, 2019 Share Posted August 22, 2019 Thanks for the feedback ! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now