dbowles1975 25 Posted July 22, 2017 Share Posted July 22, 2017 The end times shown on the OSD always seem to track with the time the stream was started and not the actual time the program should end. I also noticed that whenever a show is about to end the OSD comes and goes several times (usually 4 or 5). Is there anything I can do to correct this? Link to comment Share on other sites More sharing options...
Luke 37348 Posted July 22, 2017 Share Posted July 22, 2017 Hi, can you please discuss an example with screenshots? Thanks ! Link to comment Share on other sites More sharing options...
dbowles1975 25 Posted July 22, 2017 Author Share Posted July 22, 2017 Hi, can you please discuss an example with screenshots? Thanks ! Yes, thanks. I snapped a picture from my phone: http://imgur.com/jx72P1a Notice that the end time is earlier than the current time. That end time is actually the time I tuned to the channel. The flicker I spoke of happens, in this case, right at 1:00PM when this program ends. The OSD will come up as if you pushed the down button then it disappears on its own within a second. This happens 4 or 5 times then stops. Imagine hitting down then back on the remote 5 times in a row. It only happens when a program is about to end. Link to comment Share on other sites More sharing options...
ebr 14978 Posted July 22, 2017 Share Posted July 22, 2017 OSD Bar flashing up and down - logs sent Please test the beta of the app if you can. Thanks. Link to comment Share on other sites More sharing options...
dbowles1975 25 Posted July 22, 2017 Author Share Posted July 22, 2017 OSD Bar flashing up and down - logs sent Please test the beta of the app if you can. Thanks. Where can I get the beta? Link to comment Share on other sites More sharing options...
ebr 14978 Posted July 22, 2017 Share Posted July 22, 2017 Where can I get the beta? Android Open Beta Testing Link to comment Share on other sites More sharing options...
dbowles1975 25 Posted July 22, 2017 Author Share Posted July 22, 2017 It seems the OSD issue is resolved in beta. It only came up for a few seconds as the next program started which I assume is by design. The issue with the end time is still there. It shows as whatever time you start the stream and sometimes it doesn't show at all. Thanks for the help. Link to comment Share on other sites More sharing options...
dbowles1975 25 Posted July 25, 2017 Author Share Posted July 25, 2017 @@ebr - can we take a look at the issue with the end times for live tv mentioned above? The OSD issue seems resolved in beta but the end time issue still persists. Thanks. Link to comment Share on other sites More sharing options...
ebr 14978 Posted July 25, 2017 Share Posted July 25, 2017 It is being looked into. Thanks. Link to comment Share on other sites More sharing options...
ebr 14978 Posted July 25, 2017 Share Posted July 25, 2017 Should be fixed in the next beta (as well as the progress bar which no one had reported yet ). 1 Link to comment Share on other sites More sharing options...
maegibbons 1267 Posted July 27, 2017 Share Posted July 27, 2017 Hi @@ebr can you be more precise on beta versions in future posts please You know you dont like people using "i have the latest beta" well "next beta" is just as bad!! I still see this issue in 1.4.31a and i dont know if that is the "next" beta or not that you refered to. Also just rolled on to a new program at 9pm and in the server dashboard it is still reporting the previous program NAME in the panel although the Elapsed time within the program is right. Not sure if this one is for you or @@Luke Krs Mark Link to comment Share on other sites More sharing options...
ebr 14978 Posted July 27, 2017 Share Posted July 27, 2017 I still see this issue in 1.4.31a and i dont know if that is the "next" beta or not that you refered to. Also just rolled on to a new program at 9pm and in the server dashboard it is still reporting the previous program NAME in the panel although the Elapsed time within the program is right. Not sure if this one is for you or @@Luke Still see which issue because those two statements seem to contradict each other - unless you are saying it was flashing with the old program info... .30 should have eliminated the end time problem. However, if the program information doesn't change, then, obviously, the end time is not going to be right either. Link to comment Share on other sites More sharing options...
maegibbons 1267 Posted July 28, 2017 Share Posted July 28, 2017 (edited) Sorry for my inaccuracy as well I was referring to end time - osd flash appears fixed. In FTV app program NAME in OSD had changed but end time had not. On server the Program Name was wrong/(hadn't changed from previous) but it was still tracking correct time index within program Krs Mark Edited July 28, 2017 by maegibbons Link to comment Share on other sites More sharing options...
dbowles1975 25 Posted July 28, 2017 Author Share Posted July 28, 2017 The end time is correct when you initially start watching a program but once the program ends the OSD doesn't update with the new program name or end time. The flickering is gone, though. Link to comment Share on other sites More sharing options...
ebr 14978 Posted July 28, 2017 Share Posted July 28, 2017 Can one of you guys please let it cross a program boundary for at least 30 seconds and then exit out and send a log? Link to comment Share on other sites More sharing options...
dbowles1975 25 Posted July 28, 2017 Author Share Posted July 28, 2017 Can one of you guys please let it cross a program boundary for at least 30 seconds and then exit out and send a log? Absolutely. I'm out and about right now but if someone doesn't get to it before me I'll send one this evening. Link to comment Share on other sites More sharing options...
dbowles1975 25 Posted July 29, 2017 Author Share Posted July 29, 2017 Log sent at 6:00AM from Dave. Link to comment Share on other sites More sharing options...
ebr 14978 Posted July 29, 2017 Share Posted July 29, 2017 Thanks. I see the app updating the information so I'm not sure what is going on there. I'll have to try and reproduce locally. Link to comment Share on other sites More sharing options...
ebr 14978 Posted July 31, 2017 Share Posted July 31, 2017 Not sure I was really able to reproduce this situation but can you please test it again with 1.4.34? Thanks. Link to comment Share on other sites More sharing options...
maegibbons 1267 Posted July 31, 2017 Share Posted July 31, 2017 My MI Box didnt ever get the .33 update so hopefully it will pick up the .34 I will also test on ATV when that finally hits the uk - always takes 24-48hrs!! Krs Mark Link to comment Share on other sites More sharing options...
dbowles1975 25 Posted July 31, 2017 Author Share Posted July 31, 2017 (edited) Not sure I was really able to reproduce this situation but can you please test it again with 1.4.34? Thanks. Well done, @@ebr. It seems to work as expected now. Thanks! Edited July 31, 2017 by dbowles1975 Link to comment Share on other sites More sharing options...
ebr 14978 Posted August 1, 2017 Share Posted August 1, 2017 Thanks for reporting back. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now