Keylonta 0 Posted March 7, 2017 Share Posted March 7, 2017 It takes 30sec from the time I select Emby from the WMC UI, to when the Emby UI loads. That's 30sec of non-responsive WMC UI, then Emby loads. Can't remember if it's always taken this long to load. Server dashboard says: MB-Classic 3.0.307.0. Server Version 3.2.5.0 Link to comment Share on other sites More sharing options...
d00zah 128 Posted March 7, 2017 Share Posted March 7, 2017 Has he server IP changed recently? Check the advanced config 'tab' to see whether the connection is set to automatic, or to a defunct IP. Link to comment Share on other sites More sharing options...
Luke 37066 Posted March 7, 2017 Share Posted March 7, 2017 Yes this is the most likely cause. Our newer apps do a better job of making this process easier, but it is probably trying to connect to an obsolete server address, and so you have to wait for that to fail before you can proceed. You can check this in the advanced config tab as mentioned above. Link to comment Share on other sites More sharing options...
Keylonta 0 Posted March 8, 2017 Author Share Posted March 8, 2017 In the Advanced tab I changed it from "Current Server..." to "Find Automatically" but when I restarted Emby WMC it still took just as long, and then when I checked the setting again it had gone back to "Current Server...". Sometimes there is no load time at all, and other times the load time varies but the longest it could take is 30sec. Link to comment Share on other sites More sharing options...
ebr 14913 Posted March 9, 2017 Share Posted March 9, 2017 Try also ensuring that the option on the first config page is "Show Login screen" because selecting a specific user is, by default, also selecting a specific server. Once you have done that and brought the program back up and logged in through the login screen, you should be able to re-configure it to whatever user you wish. Link to comment Share on other sites More sharing options...
Keylonta 0 Posted March 12, 2017 Author Share Posted March 12, 2017 (edited) Try also ensuring that the option on the first config page is "Show Login screen" I tried the "Show Profile Screen" log-in option. It speeds things up because I can log in with no delay, but when I set the log-in option back to "Log in Current User", I still have the delay issue. Sometimes the WMC UI goes blank while Emy is loading, other times the WMC UI freezes while Emby loads. Sometimes I can log straight back in again, other times it takes variations of delay time up to 30sec. I can't find any pattern to the delay issue, it's totally random. Edited March 12, 2017 by Keylonta Link to comment Share on other sites More sharing options...
ebr 14913 Posted March 12, 2017 Share Posted March 12, 2017 Sounds like potentially hardware delay. Like sleeping drives or network interfaces. Link to comment Share on other sites More sharing options...
Keylonta 0 Posted March 20, 2017 Author Share Posted March 20, 2017 Sounds like potentially hardware delay. Like sleeping drives or network interfaces. The Emby server is on my PC, and I tested my drives, made sure they were accessibly and not sleeping. I think the long load times might be caused by my vpn. How does Emby handle vpn's? Could the long load times be because Emby WMC is accessing the Emby Server through the vpn server? Link to comment Share on other sites More sharing options...
ebr 14913 Posted March 20, 2017 Share Posted March 20, 2017 A VPN is something that is transparent to us. Link to comment Share on other sites More sharing options...
Keylonta 0 Posted March 25, 2017 Author Share Posted March 25, 2017 It's definitely the VPN causing the long load times for Emby WMC. If it is transparent to Emby, any ideas how it would be doing this? Link to comment Share on other sites More sharing options...
ebr 14913 Posted March 25, 2017 Share Posted March 25, 2017 @@pir8radio Link to comment Share on other sites More sharing options...
pir8radio 1292 Posted March 25, 2017 Share Posted March 25, 2017 It's definitely the VPN causing the long load times for Emby WMC. If it is transparent to Emby, any ideas how it would be doing this? How do you know "it's definitely the VPN"? Is this your VPN or a vpn service? Link to comment Share on other sites More sharing options...
Keylonta 0 Posted March 26, 2017 Author Share Posted March 26, 2017 It's a vpn service. The long load time only happens when I am connected to their server. Does that mean I am connecting to the Emby server through the vpn server first? Emby for WMC is on the same PC as the Emby server. Link to comment Share on other sites More sharing options...
pir8radio 1292 Posted March 26, 2017 Share Posted March 26, 2017 probably... That's where I was headed... or windows is trying the vpn path first timing out then trying another path, still need more info though. So you have an emby server on your LAN and the WMC client on the same LAN, the PC with the WMC client also has a vpn connected to the internet correct? WMC client uses what IP to connect to your emby server? Link to comment Share on other sites More sharing options...
Keylonta 0 Posted March 27, 2017 Author Share Posted March 27, 2017 Both the Emby server and WMC client are installed on the same PC, I'm not connected to any external devices. Does that mean they're both on the same LAN? Does the WMC client communicate through my router to the web app? Sorry, I'm not sure about this stuff. Yes, the vpn client is installed on the same PC, and is connected to the internet. When I use the client to connect to the vpn service (vpn server), this is when long load times happen when entering Emby WMC. When I'm not connected to the vpn, Emby loads fine. Is it safe to list the IP? I checked the IP address in the WMC client, and it is the same as the In-Home (LAN) IP listed on the server dashboard. Link to comment Share on other sites More sharing options...
pir8radio 1292 Posted March 27, 2017 Share Posted March 27, 2017 Both the Emby server and WMC client are installed on the same PC, I'm not connected to any external devices. Does that mean they're both on the same LAN? Does the WMC client communicate through my router to the web app? Sorry, I'm not sure about this stuff. Yes, the vpn client is installed on the same PC, and is connected to the internet. When I use the client to connect to the vpn service (vpn server), this is when long load times happen when entering Emby WMC. When I'm not connected to the vpn, Emby loads fine. Is it safe to list the IP? I checked the IP address in the WMC client, and it is the same as the In-Home (LAN) IP listed on the server dashboard. Yea you dont have to list the ip if its installed on the same pc as emby server. What happens when you manually use 127.0.0.1 as the server ip in WMC with the VPN connected? Link to comment Share on other sites More sharing options...
ebr 14913 Posted March 27, 2017 Share Posted March 27, 2017 Or just "localhost". Link to comment Share on other sites More sharing options...
Keylonta 0 Posted March 28, 2017 Author Share Posted March 28, 2017 In the WMC client I entered the User Menu, and selected "Switch Server", then used the Manual Login option for both 127.0.0.1 and localhost, both logged in fine, with no issues. Is that how you wanted me to do it? Link to comment Share on other sites More sharing options...
Luke 37066 Posted March 28, 2017 Share Posted March 28, 2017 Yes exactly because that will bypass the VPN. If you use an address that has to be routed through the VPN it is no wonder you are going to see degraded performance. Link to comment Share on other sites More sharing options...
pir8radio 1292 Posted March 28, 2017 Share Posted March 28, 2017 (edited) In the WMC client I entered the User Menu, and selected "Switch Server", then used the Manual Login option for both 127.0.0.1 and localhost, both logged in fine, with no issues. Is that how you wanted me to do it? So you found the problem, now you have to see if your VPN has an option to "Bypass VPN for local networks" or something similar. What vpn client are you using? Or leave it how it is with the manually entered address (which wont hurt anything). Edited March 28, 2017 by pir8radio Link to comment Share on other sites More sharing options...
Keylonta 0 Posted March 28, 2017 Author Share Posted March 28, 2017 Yes exactly because that will bypass the VPN. If you use an address that has to be routed through the VPN it is no wonder you are going to see degraded performance. So you found the problem The reason I asked if that was how you wanted me to manually enter the server IP, is because the Emby client has already loaded. For example, in the configuration settings, if I change the log in behavior from "Log in Current User", to "Show Profile Screen", the long load time still happens, it happens before the "Please Select a User Profile" screen appears; and doesn't the WMC client log on when I select my profile? Which would mean that logging on is not the problem. I'll try find out if my VPN service has an option to bypass VPN for local networks, their local server is not that far away from where I live so I don't understand why it would take up to 30secs to load the WMC client, if it is being routed through the VPN, it's high speed. Or leave it how it is with the manually entered address (which wont hurt anything). The issue still happens. Link to comment Share on other sites More sharing options...
Keylonta 0 Posted March 28, 2017 Author Share Posted March 28, 2017 Post 2: "Has the server IP changed recently? Check the advanced config 'tab' to see whether the connection is set to automatic, or to a defunct IP." I didn't do this correctly, I went to the General tab, and changed the "Log In | Start Up Behaviour". I should have gone to the Advanced tab and changed the "Server | Connection" setting to "Find Automatically". After doing this correctly it does fix the issue (meaning I can restart WMC and launch Emby for WMC fine), but: 1) After a few times restarting WMC, the issue starts again when launching Emby for WMC. 2) As soon as I enter the Config Menu, the issue starts again. And the "Server | Connection" setting has been changed back to "Current Server (......................), and is no longer set to "Find Automatically". Link to comment Share on other sites More sharing options...
ebr 14913 Posted March 28, 2017 Share Posted March 28, 2017 If you set the option to log in to a specific user then that implies that you also want to connect to a particular server. So, that setting will get changed if you set the option to log in as a particular user. I think, for your system to work well, you are going to have to find a way to bypass your VPN at the network level. Link to comment Share on other sites More sharing options...
Keylonta 0 Posted April 2, 2017 Author Share Posted April 2, 2017 I'll see if there is a way to bypass vpn at the network level. It would be good if Emby WMC kept the "Find Automatically" setting; but it defaults back to "Current Server...". There is clearly something causing this. When "Find Automatically" has been set, it works fine for a few times, then it takes ages to load, then it works fine, then it takes ages to load a few times, then it works fine... Anyway, thanks for the support trying to resolve this. Link to comment Share on other sites More sharing options...
ebr 14913 Posted April 2, 2017 Share Posted April 2, 2017 On the first config page, how do you have the "Login Behavior" option set? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now