chattojimnow 9 Posted October 26, 2016 Share Posted October 26, 2016 Telstra tv updated tonite now all i get is the retrieving screen.... annoying and ideas or help tried both emby and blue neon light same issue Link to comment Share on other sites More sharing options...
speechles 1920 Posted October 27, 2016 Share Posted October 27, 2016 Telstra tv updated tonite now all i get is the retrieving screen.... annoying and ideas or help tried both emby and blue neon light same issueIf you indeed sideloaded you should have developer access. Telnet: <ip of roku> 8085 If you dont have telnet, http://<ip of roku>:8085 works in a browser. If using the blue neon night app, in preferences set enable debug to yes. In the standard app this step isnt required. Now start the app and look in the debug telnet window, the app is crashing likely. Look for a brightscript crash in the debug window. If you do not see a crash indicated in the logs, you can try to delete all emby apps on your roku, even blue neon. This should ask are you sure you want to delete them. Say yes to the prompt. This prompt means it will also wipe the registry of preferences for the app. Redownload both apps again. This is a fresh install now on both. You will have to set everything back up again in each, server/username/preferences, but this may solve the issue. Sent from my Nexus 7 using Tapatalk Link to comment Share on other sites More sharing options...
chattojimnow 9 Posted October 27, 2016 Author Share Posted October 27, 2016 Ive done this.... just spins and waiting screen..... will try again(i have all the accesses ) i even went back to factory settings Link to comment Share on other sites More sharing options...
speechles 1920 Posted October 27, 2016 Share Posted October 27, 2016 (edited) Ive done this.... just spins and waiting screen..... will try again(i have all the accesses ) i even went back to factory settingsYou just need developer access, sideload, then telnet and grab debug logs from telnet. If there is a problem with the scripts in the app I can fix them. It must be broke for all telstra roku users since uninstall/reinstall and factory reset didnt cure it. You can help fix it. Edit: in the blue neon app, remember to enable debug in preferences to see all the output. Without doing this you will only see brightscript errors, not the app in motion too. Edited October 27, 2016 by speechles Link to comment Share on other sites More sharing options...
chattojimnow 9 Posted October 27, 2016 Author Share Posted October 27, 2016 here i tried the blue neon and retrieving screen just sits there 10Count loaded is now 10 out of 10Loaded 10 elements in row 6, now have 10Note: GC - Found 416 orphaned objects (objects in a circular ref loop).------ Compiling dev 'Emby Blue Neon Night' ------------ Running dev 'Emby Blue Neon Night' main ------BrightScript Micro Debugger.Enter any BrightScript statement, debug commands, or HELP.Current Function:773: {774: Condition: "LessThanEqual"775: Property: "AudioChannels"776: Value: LPCMchannels777: IsRequired: true778: }]779: })780: 781:* WMAchannels = left(audio.lookup("WMA"),1)782: profiles.push({783: Type: "VideoAudio"784: Codec: "wma"785: Conditions: [{Type Mismatch. (runtime error &h18) in pkg:/source/capabilities.brs(781)781: WMAchannels = left(audio.lookup("WMA"),1)Backtrace:#9 Function getcodecprofiles() As Dynamic file/line: pkg:/source/capabilities.brs(781)#8 Function getdeviceprofile() As Dynamic file/line: pkg:/source/capabilities.brs(966)#7 Function getcapabilities() As Dynamic file/line: pkg:/source/capabilities.brs(983)#6 Function postcapabilities() As Boolean file/line: pkg:/source/ServerUtils.brs(224)#5 Function vconsignedin(serverid As Dynamic, serverurl As Dynamic, localuserid As Dynamic) As Void file/line: pkg:/source/ViewController.brs(210)#4 Function navigatefromconnectionresult(result As Dynamic) As Void file/line: pkg:/source/ViewController.brs(151)#3 Function doinitialconnection() As Void file/line: pkg:/source/ViewController.brs(114)#2 Function vcshowinitialscreen() As Void file/line: pkg:/source/ViewController.brs(173)#1 Function vcshow() As Void file/line: pkg:/source/ViewController.brs(613)#0 Function main() As Void file/line: pkg:/source/appMain.brs(22)Local Variables:global rotINTERFACE:ifGlobalm roAssociativeArray refcnt=8 count:28profiles roArray refcnt=1 count:8playsanamorphic Boolean (2.1 was roBoolean) val:truetruehd String (VT_STR_CONST) val:"0"device bsc:roDeviceInfo refcnt=1versionarr roArray refcnt=2 count:3framerate String (VT_STR_CONST) val:"30"go4k String (VT_STR_CONST) val:"0"force roString (2.1 was String) refcnt=1 val:"Auto"directflash String (VT_STR_CONST) val:"0"maxlevel String (VT_STR_CONST) val:"51"rokutv roAssociativeArray refcnt=1 count:5isrokutv roBoolean refcnt=2 val:falsesupports4k Boolean val:falseaudio roAssociativeArray refcnt=1 count:8maxwidth String (VT_STR_CONST) val:"1920"maxheight String (VT_STR_CONST) val:"1080"max4kwidth String (VT_STR_CONST) val:"3840"max4kheight String (VT_STR_CONST) val:"2160"surroundsound Boolean (2.1 was roBoolean) val:trueaudiooutput51 Boolean (2.1 was roBoolean) val:truesurroundsounddca Boolean (2.1 was roBoolean) val:trueautoddplus String (VT_STR_CONST) val:"1"audioddplus Boolean (2.1 was roBoolean) val:falseprivate roString (2.1 was String) refcnt=1 val:"0"maxref String (VT_STR_CONST) val:"12"h264conditions roArray refcnt=2 count:7mpeg2conditions <uninitialized>mpeg1conditions <uninitialized>hevcconditions <uninitialized>vp9conditions <uninitialized>mpeg4conditions roArray refcnt=2 count:6t Invalidr <uninitialized>aacchannels roString (2.1 was String) refcnt=2 val:"2"eac3channels <uninitialized>ac3channels roString (2.1 was String) refcnt=2 val:"6"dcachannels roString (2.1 was String) refcnt=2 val:"6"flacchannels roString (2.1 was String) refcnt=2 val:"2"alacchannels roString (2.1 was String) refcnt=2 val:"2"lpcmchannels roString (2.1 was String) refcnt=2 val:"2"wmachannels <uninitialized>wmapchannels <uninitialized>mp3channels <uninitialized>mp2channels <uninitialized>BrightScript Debugger> Syntax Error. (compile error &h02) in $LIVECOMPILE(276)BrightScript Debugger> Syntax Error. (compile error &h02) in $LIVECOMPILE(277)BrightScript Debugger> Syntax Error. (compile error &h02) in $LIVECOMPILE(277)BrightScript Debugger> Syntax Error. (compile error &h02) in $LIVECOMPILE(278)BrightScript Debugger> Syntax Error. (compile error &h02) in $LIVECOMPILE(278)BrightScript Debugger> Syntax Error. (compile error &h02) in $LIVECOMPILE(279)BrightScript Debugger> Syntax Error. (compile error &h02) in $LIVECOMPILE(280)BrightScript Debugger> Syntax Error. (compile error &h02) in $LIVECOMPILE(280)BrightScript Debugger> BrightScript Debugger> but the original emby pack now works refcnt=2 count:7mpeg2conditions <uninitialized>mpeg1conditions <uninitialized>hevcconditions <uninitialized>vp9conditions <uninitialized>mpeg4conditions roArray refcnt=2 count:6t Invalidr <uninitialized>aacchannels roString (2.1 was String) refcnt=2 val:"2"eac3channels <uninitialized>ac3channels roString (2.1 was String) refcnt=2 val:"6"dcachannels roString (2.1 was String) refcnt=2 val:"6"flacchannels roString (2.1 was String) refcnt=2 val:"2"alacchannels roString (2.1 was String) refcnt=2 val:"2"lpcmchannels roString (2.1 was String) refcnt=2 val:"2"wmachannels <uninitialized>wmapchannels <uninitialized>mp3channels <uninitialized>mp2channels <uninitialized>BrightScript Debugger> Syntax Error. (compile error &h02) in $LIVECOMPILE(276)BrightScript Debugger> Syntax Error. (compile error &h02) in $LIVECOMPILE(277)BrightScript Debugger> Syntax Error. (compile error &h02) in $LIVECOMPILE(277)BrightScript Debugger> Syntax Error. (compile error &h02) in $LIVECOMPILE(278)BrightScript Debugger> Syntax Error. (compile error &h02) in $LIVECOMPILE(278)BrightScript Debugger> Syntax Error. (compile error &h02) in $LIVECOMPILE(279)BrightScript Debugger> Syntax Error. (compile error &h02) in $LIVECOMPILE(280)BrightScript Debugger> Syntax Error. (compile error &h02) in $LIVECOMPILE(280)BrightScript Debugger> BrightScript Debugger> Syntax Error. (compile error &h02) in $LIVECOMPILE(281)BrightScript Debugger> Syntax Error. (compile error &h02) in $LIVECOMPILE(282)BrightScript Debugger> Syntax Error. (compile error &h02) in $LIVECOMPILE(282)BrightScript Debugger> Syntax Error. (compile error &h02) in $LIVECOMPILE(283)BrightScript Debugger> Syntax Error. (compile error &h02) in $LIVECOMPILE(283)BrightScript Debugger> Syntax Error. (compile error &h02) in $LIVECOMPILE(284)BrightScript Debugger> Syntax Error. (compile error &h02) in $LIVECOMPILE(285)BrightScript Debugger> BrightScript Debugger> Note: GC - Found 7 orphaned objects (objects in a circular ref loop).------ Compiling dev 'Emby' ------------ Running dev 'Emby' main --------2.24--Anamorphic support: trueServer.info: listening on 0.0.0.0:8324Using broadcast address 192.168.0.255Send To Address: 192.168.0.255:7359 / 192.168.0.255:7359Received Message: {"Address":"http://192.168.0.3:8096","Id":"c491bc65b09745b0b1815a43d15f3a3a","Name":"Hodges-Media"}Found 1 serversCreating server data cacheFound string in the registry: {"c491bc65b09745b0b1815a43d15f3a3a":{"AccessToken":"f8886dc8f87d4705af224312996db888","UserId":"44a4fc3d7c214df292d51f88a1f16925","RemoteAddress":"http://60.224.28.174:8096","LastAccess":"1477533872","remoteaddress":"http://60.224.28.174:8096","Name":"Hodges-Media","name":"Hodges-Media","LocalAddress":"http://192.168.0.3:8096","localaddress":"http://192.168.0.3:8096","id":"c491bc65b09745b0b1815a43d15f3a3a"}}Parsed as: roAssociativeArrayConnect returned 0 serversconnectionManagerGetServers returning 1 serversconnectToServers called with 1 serversAttempting to connect to http://192.168.0.3:8096/emby/system/info/public?format=jsonconnectInitial returned State of SignedInconnectInitial returned ConnectionMode of LocalProcessing ConnectionResult State of SignedInSignedIn Id: c491bc65b09745b0b1815a43d15f3a3aSignedIn UserId: 44a4fc3d7c214df292d51f88a1f16925SignedIn AccessToken: f8886dc8f87d4705af224312996db888SignedIn Name: Hodges-MediaSignedIn LocalAddress: http://192.168.0.3:8096SignedIn RemoteAddress: http://60.224.28.174:8096ServerSignIn ManualAddress: Posting capabilitiesPushing screen 1 onto view controller stack - HomeLoading beginning of row 0, CollectionsLoading beginning of row 1, Disney CollectionTotal initial grid load took: 13msLoaded 0 elements in row 0, now have 0Count loaded is now 3 out of 3Loaded 3 elements in row 1, now have 3Count loaded is now 3 out of 3Loaded 3 elements in row 2, now have 3 confused alot. Link to comment Share on other sites More sharing options...
speechles 1920 Posted October 27, 2016 Share Posted October 27, 2016 (edited) @@chattojimnow Thank you. I assumed all devices supported wma audio. This is not true. This encourage me to extend audio capabilities detection even more. Now it is accurate 100%. It will also, in debug logs, tell you the support it has detected. You can see this in app using the "debug logs" button. This should solve the problem, expect a new blue neon version shortly. This is what my roku3 supports. Showing it via the in-app debug logs screen. Edited October 27, 2016 by speechles Link to comment Share on other sites More sharing options...
speechles 1920 Posted October 27, 2016 Share Posted October 27, 2016 @@chattojimnow Fixed. Thank you. https://emby.media/community/index.php?/topic/24151-Theme:-blue-neon-night&do=findComment&comment=380404 Sent from my Nexus 7 using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now