cesalo 1 Posted December 5, 2015 Share Posted December 5, 2015 Creating a new topic as per Luke advise: I'm also attaching the complete log of the library scan I did: first one took 36m the second one took 35m - There was a third one running that was kicked off automatically but didn't complete when I posted this. Below what I posted before. My current configuration is the following: QNAP TS-651 - 8G. Tried with the previous version of Emby: v3.0.5781.3 and Mono: 4.0.1.0 and things were very slow, web access was not loading the images of the movies fast and also experienced slow response when navigating between the menus or clicking buttons in general also library scan was very slow. Updated to the latest version: v3.0.5781.4 and Mono: 4.2.1.0 and things are much better at least in the web app everything seems to be running fast but still having the slow library scan. Since this is a new install I just put 2 directories with maybe 600 movies (no tvshows), no plugins (Just bookshelf but don't have even a book library yet), fanart disabled and is still very slow. The way it goes is like this: Goes up to 64.5% in 2 or 3 seconds and then is like 1 minute or more for every 0.1% so extremely slow. This is not the first time it runs, all my movies are already scraped in MB and there are no changes between scans. These are movies from 2013/2014, my current movies are in a different directory that hasn't been added to the library yet. The scan runs for like 45m - 1h and every time is the same, up to 64.5% in seconds and then it just get very slow. I enabled debugging and the weird part is that there is no messages in the log while the scan is running well at least message that look related, log attached. At server level when the scan is running I see 2 processes using almost 100% of CPU like the one below: 10866 admin 138100 S /share/CACHEDEV1_DATA/.qpkg/Qmono/bin/mono MediaBrowser.Server.Mono.exe -restartpath /etc/init.d/MediaBrowser.sh And strace is showing the following (for different movies with some pauses) so it seems is doing something not sure why is not in the server log: fcntl64(32, F_SETLK64, {type=F_RDLCK, whence=SEEK_SET, start=124, len=1}, 0xefcfb3f4) = 0fcntl64(32, F_SETLK64, {type=F_UNLCK, whence=SEEK_SET, start=124, len=1}, 0xefcfbc74) = 0stat64("/share/CACHEDEV1_DATA/.qpkg/MediaBrowser/MediaBrowser/ProgramData-Server/metadata/library/a4/a4c8d01f4d5032223b363b7e4b32b021", 0xefcfb88c) = -1 ENOENT (No such file or directory)lstat64("/share/CACHEDEV1_DATA/.qpkg/MediaBrowser/MediaBrowser/ProgramData-Server/metadata/library/a4/a4c8d01f4d5032223b363b7e4b32b021", 0xefcfb88c) = -1 ENOENT (No such file or directory)access("/share/CACHEDEV1_DATA/.qpkg/MediaBrowser/MediaBrowser/ProgramData-Server/metadata/library/a4", F_OK) = 0stat64("/share/media/movies.2/Hellboy.The.Golden.Army.2008.720p.BrRip.x264.mp4", {st_mode=S_IFREG|0744, st_size=839331621, ...}) = 0lstat64("/share/media/movies.2/Hellboy.The.Golden.Army.2008.720p.BrRip.x264.mp4", {st_mode=S_IFREG|0744, st_size=839331621, ...}) = 0geteuid32() = 0getegid32() = 0access("/share/media/movies.2/Hellboy.The.Golden.Army.2008.720p.BrRip.x264.mp4", W_OK) = 0stat64("/share/media/movies.2/Hellboy.The.Golden.Army.2008.720p.BrRip.x264.mp4", {st_mode=S_IFREG|0744, st_size=839331621, ...}) = 0lstat64("/share/media/movies.2/Hellboy.The.Golden.Army.2008.720p.BrRip.x264.mp4", {st_mode=S_IFREG|0744, st_size=839331621, ...}) = 0geteuid32() = 0getegid32() = 0access("/share/media/movies.2/Hellboy.The.Golden.Army.2008.720p.BrRip.x264.mp4", W_OK) = 0stat64("/share/media/movies.2", {st_mode=S_IFDIR|0755, st_size=61440, ...}) = 0lstat64("/share/media/movies.2", {st_mode=S_IFDIR|0755, st_size=61440, ...}) = 0geteuid32() = 0getegid32() = 0access("/share/media/movies.2", W_OK) = 0stat64("/share/media/movies.2/Hellboy.The.Golden.Army.2008.720p.BrRip.x264.xml", 0xefcfbb1c) = -1 ENOENT (No such file or directory)lstat64("/share/media/movies.2/Hellboy.The.Golden.Army.2008.720p.BrRip.x264.xml", 0xefcfbb1c) = -1 ENOENT (No such file or directory)access("/share/media/movies.2", F_OK) = 0stat64("/share/media/movies.2/Hellboy.The.Golden.Army.2008.720p.BrRip.x264.xml", 0xefcfbabc) = -1 ENOENT (No such file or directory)lstat64("/share/media/movies.2/Hellboy.The.Golden.Army.2008.720p.BrRip.x264.xml", 0xefcfbabc) = -1 ENOENT (No such file or directory)access("/share/media/movies.2", F_OK) = 0 If somebody have any ideas please let me know. I'll keep trying to dig deeper. emby_log.txt Link to comment Share on other sites More sharing options...
Luke 37273 Posted December 5, 2015 Share Posted December 5, 2015 According to the log it completed in 36 minutes, which is obviously not great. Scan media library Completed after 36 minute(s) and 24 seconds So it is completing successfully and the lack of activity just means that no changes are being found. How long does the second scan take? That would be useful information. Thanks. Link to comment Share on other sites More sharing options...
cesalo 1 Posted December 5, 2015 Author Share Posted December 5, 2015 Hi luje , thanks. The second one took 35m, even consecutive scans are taking around the same time. Any recommendations to get a decent time? Link to comment Share on other sites More sharing options...
cesalo 1 Posted December 6, 2015 Author Share Posted December 6, 2015 The next one ran in 41m: 2015-12-05 12:23:32.3662 Info - App: IntervalTrigger fired for task: Convert media2015-12-05 12:23:32.3662 Info - App: Queueing task SyncConvertScheduledTask2015-12-05 12:23:32.3662 Info - App: Executing Convert media2015-12-05 12:23:32.4012 Info - App: Convert media Completed after 0 minute(s) and 0 seconds2015-12-05 12:23:32.4641 Info - ServerManager: Sending web socket message ScheduledTaskEnded2015-12-05 13:49:23.5912 Info - App: HttpClientManager GET: http://bot.whatismyipaddress.com2015-12-05 13:49:24.0879 Info - App: HttpClientManager POST: https://connect.emby.media/service/Servers?id=5ac2bc4996943c8c204447a4c0b642a12015-12-05 13:49:24.2435 Info - App: HttpClientManager GET: https://connect.emby.media/service/ServerAuthorizations?serverId=5ac2bc4996943c8c204447a4c0b642a12015-12-05 14:04:10.9205 Info - App: IntervalTrigger fired for task: Scan media library2015-12-05 14:04:10.9205 Info - App: Queueing task RefreshMediaLibraryTask2015-12-05 14:04:10.9205 Info - App: Executing Scan media library2015-12-05 14:04:10.9360 Info - App: Validating media library2015-12-05 14:16:18.2125 Info - App: ScheduledTasksWebSocketListener stop transmitting over websocket to 10.0.0.14:503222015-12-05 14:16:19.4248 Info - HttpServer: HTTP GET http://10.0.0.35:8096/mediabrowser/System/Logs. UserAgent: Mozilla/5.0 (Windows NT 6.3; WOW64; rv:37.0) Gecko/20100101 Firefox/37.0 2015-12-05 14:16:19.4319 Info - HttpServer: HTTP Response 200 to 10.0.0.14. Time: 7ms. http://10.0.0.35:8096/mediabrowser/System/Logs2015-12-05 14:16:25.3831 Info - HttpServer: HTTP GET http://10.0.0.35:8096/mediabrowser/System/Logs/Log?name=server-63584909342.txt&api_key=82f4b244d17d4a94bcf9f1b2fb676609. UserAgent: Mozilla/5.0 (Windows NT 6.3; WOW64; rv:37.0) Gecko/20100101 Firefox/37.0 2015-12-05 14:16:25.4350 Info - HttpServer: HTTP Response 200 to 10.0.0.14. Time: 52ms. http://10.0.0.35:8096/mediabrowser/System/Logs/Log?name=server-63584909342.txt&api_key=82f4b244d17d4a94bcf9f1b2fb6766092015-12-05 14:16:25.9243 Info - HttpServer: HTTP GET http://10.0.0.35:8096/favicon.ico. UserAgent: Mozilla/5.0 (Windows NT 6.3; WOW64; rv:37.0) Gecko/20100101 Firefox/37.0 2015-12-05 14:16:25.9660 Error - NotFoundHttpHandler: 10.0.0.35:8096 Request not found: /favicon.ico2015-12-05 14:16:25.9683 Info - HttpServer: HTTP Response 404 to 10.0.0.14. Time: 44ms. http://10.0.0.35:8096/favicon.ico2015-12-05 14:16:25.9763 Info - HttpServer: HTTP GET http://10.0.0.35:8096/favicon.ico. UserAgent: Mozilla/5.0 (Windows NT 6.3; WOW64; rv:37.0) Gecko/20100101 Firefox/37.0 2015-12-05 14:16:25.9763 Error - NotFoundHttpHandler: 10.0.0.35:8096 Request not found: /favicon.ico2015-12-05 14:16:25.9777 Info - HttpServer: HTTP Response 404 to 10.0.0.14. Time: 1ms. http://10.0.0.35:8096/favicon.ico2015-12-05 14:16:25.9832 Info - HttpServer: HTTP GET http://10.0.0.35:8096/favicon.ico. UserAgent: Mozilla/5.0 (Windows NT 6.3; WOW64; rv:37.0) Gecko/20100101 Firefox/37.0 2015-12-05 14:16:25.9832 Error - NotFoundHttpHandler: 10.0.0.35:8096 Request not found: /favicon.ico2015-12-05 14:16:25.9845 Info - HttpServer: HTTP Response 404 to 10.0.0.14. Time: 1ms. http://10.0.0.35:8096/favicon.ico2015-12-05 14:18:11.0754 Info - App: ScheduledTasksWebSocketListener Begin transmitting over websocket to 10.0.0.14:503222015-12-05 14:18:11.1634 Info - HttpServer: HTTP GET http://10.0.0.35:8096/mediabrowser/ScheduledTasks?isHidden=false. UserAgent: Mozilla/5.0 (Windows NT 6.3; WOW64; rv:37.0) Gecko/20100101 Firefox/37.0 2015-12-05 14:18:11.1721 Info - HttpServer: HTTP Response 200 to 10.0.0.14. Time: 8ms. http://10.0.0.35:8096/mediabrowser/ScheduledTasks?isHidden=false2015-12-05 14:20:06.8527 Debug - HttpServer: Exiting HttpConnection.OnReadInternal because nread=0. ConnectionId: 9e74bb3ad83442808399341f59259efd2015-12-05 14:45:57.7265 Debug - App: Running post-scan task MovieUpdatesPreScanTask2015-12-05 14:45:57.7265 Debug - App: Running post-scan task FanartMovieUpdatesPostScanTask2015-12-05 14:45:57.7265 Debug - App: Running post-scan task FanartUpdatesPostScanTask2015-12-05 14:45:57.7265 Debug - App: Running post-scan task FanArtTvUpdatesPostScanTask2015-12-05 14:45:57.7265 Debug - App: Running post-scan task TvdbPrescanTask2015-12-05 14:45:57.7648 Info - App: HttpClientManager GET: http://thetvdb.com/api/Updates.php?type=all&time=14492561022015-12-05 14:45:58.4644 Debug - App: Running post-scan task LocalTrailerPostScanTask2015-12-05 14:45:58.4966 Debug - App: Running post-scan task ArtistsPostScanTask2015-12-05 14:45:58.4966 Debug - App: Running post-scan task GameGenresPostScanTask2015-12-05 14:45:58.4966 Debug - SqliteItemRepository: select guid from TypedBaseItems where type=@type2015-12-05 14:45:58.5621 Debug - App: Running post-scan task GenresPostScanTask2015-12-05 14:45:58.6835 Debug - SqliteItemRepository: select guid from TypedBaseItems where type=@type2015-12-05 14:45:58.7215 Debug - App: Running post-scan task MusicGenresPostScanTask2015-12-05 14:45:58.7215 Debug - SqliteItemRepository: select guid from TypedBaseItems where type=@type2015-12-05 14:45:58.7587 Debug - App: Running post-scan task StudiosPostScanTask2015-12-05 14:46:02.8244 Debug - SqliteItemRepository: select guid from TypedBaseItems where type=@type2015-12-05 14:46:02.9006 Debug - App: Running post-scan task YearsPostScanTask2015-12-05 14:46:03.0605 Debug - App: Running post-scan task RefreshIntrosTask2015-12-05 14:46:03.0605 Debug - App: Running post-scan task SeriesPostScanTask2015-12-05 14:46:03.2127 Info - App: Scan media library Completed after 41 minute(s) and 52 seconds Link to comment Share on other sites More sharing options...
Luke 37273 Posted December 6, 2015 Share Posted December 6, 2015 Can you give me an overview of your library? Link to comment Share on other sites More sharing options...
cesalo 1 Posted December 6, 2015 Author Share Posted December 6, 2015 Here it is, the 2 directories I have added. media_files.txt Link to comment Share on other sites More sharing options...
cesalo 1 Posted December 16, 2015 Author Share Posted December 16, 2015 So i've doing some tests: -Wiped out my Library -Added 100 movies -> Media library finished in 35 seconds -Added 100 movies -> Media library finished in 95 seconds -Added 100 movies -> Media library finished in 120 seconds . . At the moment I have around 500 movies and the scan is taking 7m and 24 seconds with no changes or relevant message in the log. It seems every time I add more files the scan time increases exponentially. Another issue I noticed is that if I have a new movie it doesn't update the library automatically so I have to run a scan which means I have to wait 7m to be able to watch it. Any assistance is welcome. I can't believe I'm the only one having this issue . emby_log_2.txt Link to comment Share on other sites More sharing options...
breezytm 124 Posted December 16, 2015 Share Posted December 16, 2015 I can't believe I'm the only one having this issue . says who? Link to comment Share on other sites More sharing options...
cesalo 1 Posted December 28, 2015 Author Share Posted December 28, 2015 @@breezytm so how do you deal with this issue? Do you run a 10m library scan after you add new movies/shows? It's a little bit frustrating since this is working perfectly in Plex that is running in the same NAS (qnap) and has the same movie directories. Link to comment Share on other sites More sharing options...
cesalo 1 Posted December 28, 2015 Author Share Posted December 28, 2015 @@Luke Do you have any other recommendations to speed up the library scan? Do you need more logs or anything else? Link to comment Share on other sites More sharing options...
breezytm 124 Posted December 28, 2015 Share Posted December 28, 2015 have you tried the latest qpkg from the qnap website? should be much improved and also you may consider turning off chapters if it is already disabled by default. Link to comment Share on other sites More sharing options...
cesalo 1 Posted January 20, 2016 Author Share Posted January 20, 2016 Thanks @@breezytm. Yes I always used the last version, at the moment running Version 3.0.5786.0 - but still at the moment with all my media files I'm around 1h for each scan. Do you have any recommendations about Emby not detecting new files added until a complete scan is done manually or by schedule? Link to comment Share on other sites More sharing options...
msavazzi 1 Posted January 20, 2016 Share Posted January 20, 2016 says who? I have the same issue! Thanks @@breezytm. Yes I always used the last version, at the moment running Version 3.0.5786.0 - but still at the moment with all my media files I'm around 1h for each scan. Do you have any recommendations about Emby not detecting new files added until a complete scan is done manually or by schedule? I have a QNAP 659... I have quite a big library but Emby (6 folders with thousands of contents) all the folders do already have all the correct files (NFO, art, etc...) created with Ember Media Manager and they were used with Kodi. On my HTPC a full library scan (via network) takes between 40 and 45 min. I've launched the library scan 10 hours ago and I'm still at 45% I have a lot of lines like this: 2016-01-20 09:30:58.5464 Info App: Emby.Kodi.SyncQueue: Adding ItemId: '11a720643cf8734de492464d110e53d5' for UserID: 'e65403365deb43389c98843d138bccdf' to table: 'ItemsAddedQueue' 2016-01-20 09:30:58.6891 Info App: Emby.Kodi.SyncQueue: Adding ItemId: '01b1d97a749a144b5dde6dccfb23ac55' for UserID: 'e65403365deb43389c98843d138bccdf' to table: 'ItemsAddedQueue' 2016-01-20 09:30:58.8335 Info App: Emby.Kodi.SyncQueue: Adding ItemId: '36bd9602acdb316215697536b97c928f' for UserID: 'e65403365deb43389c98843d138bccdf' to table: 'ItemsAddedQueue' 2016-01-20 09:30:58.9547 Info App: Emby.Kodi.SyncQueue: Adding ItemId: '211a466839303d177373d97c6fc30c45' for UserID: 'e65403365deb43389c98843d138bccdf' to table: 'ItemsAddedQueue' 2016-01-20 09:30:59.0673 Info App: Emby.Kodi.SyncQueue: Adding ItemId: '74d7fa4f2c26c338ad535cf9a3933a25' for UserID: 'e65403365deb43389c98843d138bccdf' to table: 'ItemsAddedQueue' 2016-01-20 09:30:59.1672 Info App: Emby.Kodi.SyncQueue: Adding ItemId: 'd3e4d8da5765a04f65c90fe4a858786d' for UserID: 'e65403365deb43389c98843d138bccdf' to table: 'ItemsAddedQueue' 2016-01-20 09:30:59.3205 Info App: Emby.Kodi.SyncQueue: Adding ItemId: 'fd5a43632e958914e7057db67e1ce193' for UserID: 'e65403365deb43389c98843d138bccdf' to table: 'ItemsAddedQueue' 2016-01-20 09:30:59.4334 Info App: Emby.Kodi.SyncQueue: Adding ItemId: '7c94ba63fc911d762274679a38e97343' for UserID: 'e65403365deb43389c98843d138bccdf' to table: 'ItemsAddedQueue' 2016-01-20 09:30:59.6001 Info App: Emby.Kodi.SyncQueue: Adding ItemId: '1a91c11cefb9fb6927be6c9974e54b8e' for UserID: 'e65403365deb43389c98843d138bccdf' to table: 'ItemsAddedQueue' 2016-01-20 09:30:59.7466 Info App: Emby.Kodi.SyncQueue: Adding ItemId: '5faff792fda79deeb0dfd0882e05a31f' for UserID: 'e65403365deb43389c98843d138bccdf' to table: 'ItemsAddedQueue' 2016-01-20 09:30:59.9335 Info App: Emby.Kodi.SyncQueue: Adding ItemId: '174875cab7975178a28c5cde596265aa' for UserID: 'e65403365deb43389c98843d138bccdf' to table: 'ItemsAddedQueue' 2016-01-20 09:31:00.0686 Info App: Emby.Kodi.SyncQueue: Adding ItemId: 'cfb0f0bf9d45cea4c3d712cc2d39d761' for UserID: 'e65403365deb43389c98843d138bccdf' to table: 'ItemsAddedQueue' sometimes I get some: 2016-01-20 10:12:13.2956 Error App: Error in ffprobe *** Error Report *** Version: 3.0.5786.0 Command line: /share/MD0_DATA/.qpkg/Emby/Emby/MediaBrowser.Server.Mono.exe Operating system: Unix 3.4.6.0 Processor count: 4 64-Bit OS: False 64-Bit Process: False Program data path: /share/MD0_DATA/.qpkg/Emby/Emby/ProgramData-Server Mono: 4.2.1 (Stable 4.2.1.102/6dd2d0d Sat Nov 21 10:02:10 EST 2015) Application Path: /share/MD0_DATA/.qpkg/Emby/Emby/MediaBrowser.Server.Mono.exe Missing mount, umount or sudo. Unable to continue System.IO.IOException at MediaBrowser.IsoMounter.LinuxIsoManager+<Mount>c__async0.MoveNext () <0xeea2c1f0 + 0x0016b> in <filename unknown>:0 --- End of stack trace from previous location where exception was thrown --- at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw () <0xeea2d298 + 0x0002b> in <filename unknown>:0 at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess (System.Threading.Tasks.Task task) <0xeea2d1b8 + 0x000bb> in <filename unknown>:0 at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification (System.Threading.Tasks.Task task) <0xeea2d120 + 0x0007f> in <filename unknown>:0 at System.Runtime.CompilerServices.TaskAwaiter.ValidateEnd (System.Threading.Tasks.Task task) <0xf4071ba8 + 0x00033> in <filename unknown>:0 at System.Runtime.CompilerServices.ConfiguredTaskAwaitable`1+ConfiguredTaskAwaiter[TResult].GetResult () <0xf394b3b8 + 0x00017> in <filename unknown>:0 at MediaBrowser.Providers.MediaInfo.FFProbeVideoInfo+<ProbeVideo>d__0`1[T].MoveNext () <0xeea5b338 + 0x0043b> in <filename unknown>:0 --- End of stack trace from previous location where exception was thrown --- at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw () <0xeea2d298 + 0x0002b> in <filename unknown>:0 at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess (System.Threading.Tasks.Task task) <0xeea2d1b8 + 0x000bb> in <filename unknown>:0 at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification (System.Threading.Tasks.Task task) <0xeea2d120 + 0x0007f> in <filename unknown>:0 at System.Runtime.CompilerServices.TaskAwaiter.ValidateEnd (System.Threading.Tasks.Task task) <0xf4071ba8 + 0x00033> in <filename unknown>:0 at System.Runtime.CompilerServices.ConfiguredTaskAwaitable`1+ConfiguredTaskAwaiter[TResult].GetResult () <0xf0873a60 + 0x00013> in <filename unknown>:0 at MediaBrowser.Providers.Manager.MetadataService`2+<RunCustomProvider>d__52[TItemType,TIdType].MoveNext () <0xeec5c668 + 0x003ff> in <filename unknown>:0 How can it be possible is so slow? Link to comment Share on other sites More sharing options...
Luke 37273 Posted January 20, 2016 Share Posted January 20, 2016 Try removing plugins such as the sync queue plugin and then compare. Thanks. Link to comment Share on other sites More sharing options...
cesalo 1 Posted January 20, 2016 Author Share Posted January 20, 2016 Hi @@Luke - I don't have any plugins, actually I just installed the latest version and pretty much wiped out everything and started from scratch. Still seeing the same slow scan times as before. Also the issue about not detecting new files until a full scan is done. Link to comment Share on other sites More sharing options...
msavazzi 1 Posted January 20, 2016 Share Posted January 20, 2016 removed all plugins and restarted. It jumped from 0.5% to 11.4% in less than a second then stopped there. Note from my pc a full library check with ember media manager via network requires no more than 3 min Link to comment Share on other sites More sharing options...
msavazzi 1 Posted January 20, 2016 Share Posted January 20, 2016 here the log: 2016-01-20 20:15:27.3608 Info App: Emby.Kodi.SyncQueue: Adding ItemId: '229df8b8afacdff10f170dca1a3da636' for UserID: 'e65403365deb43389c98843d138bccdf' to table: 'UserInfoChangedQueue' 2016-01-20 20:15:28.1882 Info App: Emby.Kodi.SyncQueue: Updating ItemId: '2e218ed81037b1a59041f7b4796761d7' for UserId: 'e65403365deb43389c98843d138bccdf' in table: 'UserInfoChangedQueue' 2016-01-20 20:15:31.9432 Info App: Emby.Kodi.SyncQueue: Adding ItemId: '229df8b8afacdff10f170dca1a3da636' for UserID: 'e65403365deb43389c98843d138bccdf' to table: 'ItemsUpdatedQueue' 2016-01-20 20:15:50.9090 Info App: Emby.Kodi.SyncQueue: Adding ItemId: 'd16442b99317c650f6f088c82c7dff74' for UserID: 'e65403365deb43389c98843d138bccdf' to table: 'ItemsUpdatedQueue' 2016-01-20 20:16:11.6749 Info App: Emby.Kodi.SyncQueue: Adding ItemId: '81c8a5b9957fbf891140196baab1e2ba' for UserID: 'e65403365deb43389c98843d138bccdf' to table: 'ItemsUpdatedQueue' 2016-01-20 20:16:12.1317 Info App: Emby.Kodi.SyncQueue: Adding ItemId: '12c705ba64046107673d9662e9ebc61d' for UserID: 'e65403365deb43389c98843d138bccdf' to table: 'ItemsUpdatedQueue' or 2016-01-20 20:16:27.6187 Info App: Emby.Kodi.SyncQueue: Adding ItemId: 'f771dabb79ff9fe1fa7fcf663f8093c1' for UserID: 'e65403365deb43389c98843d138bccdf' to table: 'UserInfoChangedQueue' 2016-01-20 20:16:28.0690 Info App: Emby.Kodi.SyncQueue: Updating ItemId: '2e218ed81037b1a59041f7b4796761d7' for UserId: 'e65403365deb43389c98843d138bccdf' in table: 'UserInfoChangedQueue' 2016-01-20 20:16:32.0184 Info App: Emby.Kodi.SyncQueue: Adding ItemId: '7c8a8dbb35a9b0721694f7c24eab784b' for UserID: 'e65403365deb43389c98843d138bccdf' to table: 'ItemsUpdatedQueue' 2016-01-20 20:16:32.4496 Info App: Emby.Kodi.SyncQueue: Adding ItemId: 'f771dabb79ff9fe1fa7fcf663f8093c1' for UserID: 'e65403365deb43389c98843d138bccdf' to table: 'ItemsUpdatedQueue' it takes even 20 seconds for a file... what is it doing? Link to comment Share on other sites More sharing options...
cesalo 1 Posted January 20, 2016 Author Share Posted January 20, 2016 @@msavazzi Can you validate if your emby server is recognizing automatically new movies/tv shows or if you need to do a full library scan? Thanks in advance. Link to comment Share on other sites More sharing options...
msavazzi 1 Posted January 20, 2016 Share Posted January 20, 2016 @@msavazzi Can you validate if your emby server is recognizing automatically new movies/tv shows or if you need to do a full library scan? Thanks in advance. how can I do that? I added the library and launched an update. Note: 1 hour after it moved from 47% to 47.2% Link to comment Share on other sites More sharing options...
msavazzi 1 Posted January 20, 2016 Share Posted January 20, 2016 47.9% Link to comment Share on other sites More sharing options...
msavazzi 1 Posted January 20, 2016 Share Posted January 20, 2016 memory 79% mono 0.7% cpu - 228352K ffmpef 3.1% cpu - 55296K Why ffmpeg is used? I've disabled scraping from network, just read NFO in the NFO there are already the info on the file I tried to remove everything from Emby but still no change... Link to comment Share on other sites More sharing options...
Luke 37273 Posted January 20, 2016 Share Posted January 20, 2016 Could be image extraction, or ffprobe to scan for media info. To answer that please see here: http://emby.media/community/index.php?/topic/739-how-to-report-a-problem/ Link to comment Share on other sites More sharing options...
cesalo 1 Posted January 20, 2016 Author Share Posted January 20, 2016 I see the same behavior - Scan is very slow not just the first time that can be expected but every time a scan runs even with no change in the media files it takes the same time and is proportional to the amount of files. At the moment I'm at almost 1h. So far nobody has been able to provide any answer or any recommendation to fix or improve this issue. The other issue that I guess I may need to create another post is that is not detecting new files automatically. Link to comment Share on other sites More sharing options...
msavazzi 1 Posted January 20, 2016 Share Posted January 20, 2016 48.3% Link to comment Share on other sites More sharing options...
msavazzi 1 Posted January 20, 2016 Share Posted January 20, 2016 48.4% Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now