saed 6 Posted April 14, 2020 Share Posted April 14, 2020 are .png files between 6 and 20KB in size 220x132 pixels Greetings Link to comment Share on other sites More sharing options...
Luke 37098 Posted April 14, 2020 Share Posted April 14, 2020 Can you refresh the guide data in emby server, then attach the emby server log? Thanks. Link to comment Share on other sites More sharing options...
saed 6 Posted April 15, 2020 Share Posted April 15, 2020 (edited) Something I have forgotten to say is that the two programs, both emby and tvheadend are for docker the file is very large, I'm going to give an example of a channel 2020-04-15 10:39:10.027 Info HttpServer: HTTP Response 200 to 192.168.22.143. Time: 16ms. http://192.168.22.140:8096/emby/System/Logs 2020-04-15 10:39:18.637 Info App: [TVHclient] HTSConnectionHandler.ensureConnection() : create new HTS-Connection 2020-04-15 10:39:18.638 Info App: [TVHclient] HTSConnectionHandler.ensureConnection: Used connection parameters: TVH Server = '192.168.22.140'; HTTP Port = '9981'; HTSP Port = '9982'; Web-Root = ''; User = 'emby'; Password set = 'True' 2020-04-15 10:39:18.640 Info App: [TVHclient] HTSConnectionAsync.open: IPEndPoint = '192.168.22.140:9982'; AddressFamily = 'InterNetwork' 2020-04-15 10:39:18.640 Info App: [TVHclient] HTSConnectionAsync.open: socket connected. 2020-04-15 10:39:18.646 Info App: [TVHclient] HTSConnectionAsync.authenticate: start 2020-04-15 10:39:18.663 Info App: [TVHclient] HTSConnectionAsync.authenticate: authenticated = True 2020-04-15 10:39:18.663 Info App: [TVHclient] HTSConnectionHandler.ensureConnection: connection established True 2020-04-15 10:39:28.025 Info HttpServer: HTTP GET http://192.168.22.140:8096/emby/System/Logs/embyserver.txt. UserAgent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/80.0.3987.163 Safari/537.36 2020-04-15 10:39:28.032 Info HttpServer: HTTP Response 200 to 192.168.22.143. Time: 7ms. http://192.168.22.140:8096/emby/System/Logs/embyserver.txt 2020-04-15 10:40:26.732 Info HttpServer: HTTP GET http://192.168.22.140:8096/emby/Users/44f1676e80b44f48be58e7aa52ffdef7. UserAgent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/80.0.3987.163 Safari/537.36 2020-04-15 10:40:26.734 Info HttpServer: HTTP Response 200 to 192.168.22.143. Time: 3ms. http://192.168.22.140:8096/emby/Users/44f1676e80b44f48be58e7aa52ffdef7 2020-04-15 10:40:26.740 Info HttpServer: HTTP GET http://192.168.22.140:8096/emby/Plugins. UserAgent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/80.0.3987.163 Safari/537.36 2020-04-15 10:40:26.741 Info HttpServer: HTTP Response 200 to 192.168.22.143. Time: 1ms. http://192.168.22.140:8096/emby/Plugins 2020-04-15 10:40:26.748 Info HttpServer: HTTP GET http://192.168.22.140:8096/emby/web/configurationpages?pageType=PluginConfiguration. UserAgent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/80.0.3987.163 Safari/537.36 2020-04-15 10:40:26.749 Info HttpServer: HTTP Response 200 to 192.168.22.143. Time: 1ms. http://192.168.22.140:8096/emby/web/configurationpages?pageType=PluginConfiguration 2020-04-15 10:40:29.188 Info HttpServer: HTTP GET http://192.168.22.140:8096/emby/LiveTv/ListingProviders. UserAgent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/80.0.3987.163 Safari/537.36 2020-04-15 10:40:29.190 Info HttpServer: HTTP GET http://192.168.22.140:8096/emby/ScheduledTasks?IsEnabled=true. UserAgent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/80.0.3987.163 Safari/537.36 2020-04-15 10:40:29.193 Info HttpServer: HTTP GET http://192.168.22.140:8096/emby/LiveTv/TunerHosts. UserAgent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/80.0.3987.163 Safari/537.36 2020-04-15 10:40:29.196 Info HttpServer: HTTP Response 200 to 192.168.22.143. Time: 6ms. http://192.168.22.140:8096/emby/ScheduledTasks?IsEnabled=true 2020-04-15 10:40:29.200 Info HttpServer: HTTP Response 200 to 192.168.22.143. Time: 7ms. http://192.168.22.140:8096/emby/LiveTv/TunerHosts 2020-04-15 10:40:29.201 Info HttpServer: HTTP Response 200 to 192.168.22.143. Time: 14ms. http://192.168.22.140:8096/emby/LiveTv/ListingProviders 2020-04-15 10:40:31.084 Info HttpServer: HTTP POST http://192.168.22.140:8096/emby/ScheduledTasks/Running/9492d30c70f7f1bec3757c9d0a4feb45. UserAgent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/80.0.3987.163 Safari/537.36 2020-04-15 10:40:31.091 Info HttpServer: HTTP Response 204 to 192.168.22.143. Time: 7ms. http://192.168.22.140:8096/emby/ScheduledTasks/Running/9492d30c70f7f1bec3757c9d0a4feb45 2020-04-15 10:40:31.096 Info HttpServer: HTTP GET http://192.168.22.140:8096/emby/ScheduledTasks?IsEnabled=true. UserAgent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/80.0.3987.163 Safari/537.36 2020-04-15 10:40:31.100 Info HttpServer: HTTP Response 200 to 192.168.22.143. Time: 4ms. http://192.168.22.140:8096/emby/ScheduledTasks?IsEnabled=true 2020-04-15 10:40:34.132 Info App: [TVHclient] ChannelDataHelper: Adding channel HTSMessage: <dump> channelId : 9009255 channelNumber : 2010 channelName : MULTIDEPORTE channelIcon : imagecache/279 eventId : 0 nextEventId : 0 services : HTSMessage: <dump> name : SAT/10788V/MULTIDEPORTE type : SDTV content : 1 caid : 65535 caname : Servicio encriptado </dump> , tags : 2, 3, method : channelAdd </dump> 2020-04-15 10:40:34.132 Info App: [TVHclient] ChannelDataHelper: Adding channel HTSMessage: <dump> channelId : 20724296 channelNumber : 2000 channelName : LALIGATV BAR channelIcon : imagecache/266 eventId : 25932 nextEventId : 25933 services : HTSMessage: <dump> name : SAT/10714.25H/LALIGATV BAR type : HDTV content : 1 caid : 65535 caname : Servicio encriptado </dump> --- the imagecache/266 channel "LALIGATV BAR" corresponds to the tvheadend logo called 266.png. Where are these images located in emby ?, I look in the cache folder for "266" and I cannot find If this small fragment does not help you, I can give you more but they are 30MB, my guide file is very extensive Thank you Edited April 15, 2020 by saed Link to comment Share on other sites More sharing options...
Luke 37098 Posted April 15, 2020 Share Posted April 15, 2020 I really would need to see teh complete log containing both the refresh and then also from when you opened the channel list after the refresh was done. Thanks. Link to comment Share on other sites More sharing options...
saed 6 Posted April 16, 2020 Share Posted April 16, 2020 (edited) Hi. Sorry for the delay I attach the requested registration. Thanks a lot embyserver.txt Edited April 16, 2020 by saed Link to comment Share on other sites More sharing options...
Luke 37098 Posted April 28, 2020 Share Posted April 28, 2020 Hi. Sorry for the delay I attach the requested registration. Thanks a lot Your TVH server is sending back 401 unauthorized errors: 2020-04-16 16:40:17.508 Info HttpClient: GET http://emby:pw@192.168.22.140:9981/imagecache/82 2020-04-16 16:40:17.509 Error HttpServer: Error processing request *** Error Report *** Version: 4.4.2.0 Command line: /app/emby/EmbyServer.dll -programdata /config -ffdetect /app/emby/ffdetect -ffmpeg /app/emby/ffmpeg -ffprobe /app/emby/ffprobe -restartexitcode 3 Operating system: Unix 4.19.0.8 64-Bit OS: True 64-Bit Process: True User Interactive: True Runtime: file:///app/emby/System.Private.CoreLib.dll System.Environment.Version: 3.1.2 Processor count: 4 Program data path: /config Application directory: /app/emby MediaBrowser.Model.Net.HttpException: MediaBrowser.Model.Net.HttpException: Unauthorized Can you find out why, perhaps from TVH logging? Link to comment Share on other sites More sharing options...
s-andy 1 Posted June 28, 2020 Share Posted June 28, 2020 (edited) Hi, guys! I have: Emby Server 4.4.2.0, TVHclient 1.4.4.0; Tvheadend 4.2.2. And constantly having problems with this setup. Currently: Channels do not play in Emby via web interface. But, they do play via Emby Android app. They also do not play via Samsung SmartTV widget (not Tizen), but, I guess, this is related to the web UI problem. Everything works fine via Tvheadend web interface and via TVHClient Android app. I also had issues with: missing TV Guide, duplicate channels etc, but managed to resolve them (mostly by refreshing channels in Tvheadend, uninstalling/installing plugin and so on). Before, several years ago, when an older version of Emby Server was used, everything worked fine. Please help. Update: By "do not play" I mean, that Emby is showing the animation circle, but never starts displaying. In Samsung app it's showing "Loading...". Thanks. Andriy Edited June 28, 2020 by s-andy Explained, what I meant by "do not play". Link to comment Share on other sites More sharing options...
vaise 307 Posted June 30, 2020 Share Posted June 30, 2020 @s-andy - I stopped using the TVH plugin ages back and just added the default tvh iptv stream to emby's native Live TV, which has never ever missed a beat. In the LiveTV section of emby, I add this, which is the TVH stream : http://192.168.1.202:9981/playlist/channels.m3u I then use a separate TV guide as I am in Australia and the TV channel supplied ones are pretty useless so I use IceTV (a paid for guild - $2.99/month). I know very little about TVH, but this solution has worked for us for years now. Link to comment Share on other sites More sharing options...
s-andy 1 Posted June 30, 2020 Share Posted June 30, 2020 @vaise, thanks for your comment! Actually, I'm wondering, if I'm supposed to do the same - i.e., to move out from the TVH plugin. Or should I try to fix it. What's recommended? TVHeadEnd has quite a good TV guide - it it possible to use it without the plugin? Link to comment Share on other sites More sharing options...
vaise 307 Posted June 30, 2020 Share Posted June 30, 2020 To answer that you are not 'supposed' to do anything, it is all configurable to use what suits you best. I have had other recording apps in the past (WMC, nextPVR etc) but when I moved to an unraid server and hence linux based, I needed to change - I tried three different ones and TVH was the best (albeit very configurable and somewhat confusing on initial load). I used forum setup posts to do the initial setup with my HDHomeRuns and never knew about TVH's streaming capability until I came across another post on here. I tried it and it worked from day 1. It means Emby is doing all the recording management, nd it is very good at it. Guide data is very much dependent on the country you are in and the capabilities in that country. If you are just referring to the standard EPG stuff, that is not actually in TVH, but in the ID data sent in the digital channels by the TV providers. In Australia we have a very bad data in there as the channel's do sneaky stuff to stop 'normal' PVR's from doing series linking. The would change the show in the guide to something like 'Big Brother and sneak peak'. For that reason, I use ICETV here as they re-work all the show names so they are always the same, plus they key in the data info for me. Emby users in other countries get to use other EPG systems (search EPG in the Emby forrum). Hope that helps. Link to comment Share on other sites More sharing options...
muppets4 23 Posted July 12, 2020 Share Posted July 12, 2020 Just a heads up . Great plugin. One thing you must know. After filling in the settings things do not change, until you restart Emby. Took me a while. I could see in the tvheadend log that my username did not change after changing it in the plugin. A restart solves this. Link to comment Share on other sites More sharing options...
Ivan_ 0 Posted August 5, 2020 Share Posted August 5, 2020 (edited) On 28/06/2020 at 13:30, s-andy said: Hi, guys! I have: Emby Server 4.4.2.0, TVHclient 1.4.4.0; Tvheadend 4.2.2. And constantly having problems with this setup. Currently: Channels do not play in Emby via web interface. But, they do play via Emby Android app. They also do not play via Samsung SmartTV widget (not Tizen), but, I guess, this is related to the web UI problem. Everything works fine via Tvheadend web interface and via TVHClient Android app. I also had issues with: missing TV Guide, duplicate channels etc, but managed to resolve them (mostly by refreshing channels in Tvheadend, uninstalling/installing plugin and so on). Before, several years ago, when an older version of Emby Server was used, everything worked fine. Please help. Update: By "do not play" I mean, that Emby is showing the animation circle, but never starts displaying. In Samsung app it's showing "Loading...". Thanks. Andriy Hi Andy, Which internet browser are you using. I just noticed that I have the same setup as you and same symptoms: - It works from Tvheadend web interface, Android version of Emby and Firefox - It does not work in Google Chrome (it used to work but not anymore) Does it work for you in firefox? Regards, Ivan Edited August 5, 2020 by Ivan_ Link to comment Share on other sites More sharing options...
Luke 37098 Posted August 6, 2020 Share Posted August 6, 2020 22 hours ago, Ivan_ said: Hi Andy, Which internet browser are you using. I just noticed that I have the same setup as you and same symptoms: - It works from Tvheadend web interface, Android version of Emby and Firefox - It does not work in Google Chrome (it used to work but not anymore) Does it work for you in firefox? Regards, Ivan Hi, let's look at an example. Please attach the information requested in how to report a media playback issue. thanks ! Link to comment Share on other sites More sharing options...
Flippz 17 Posted December 25, 2020 Share Posted December 25, 2020 (edited) There seems to be a bug in the tvheadend plugin. If i start a tv channel sometimes the log says that it starts it one time and a coulple of seconds later it trys again. But it has actually started 2 connections to tvheadend server. When i then stop the channel one stops but the other stays running indefenetly. If i restart emby the connection is emidietly dropped. error.txt Edited December 25, 2020 by Flippz screen and log Link to comment Share on other sites More sharing options...
darkside40 91 Posted May 1, 2021 Share Posted May 1, 2021 (edited) What is the actual state of this plugin? I mean it is in the plugin catalog which means that is should be actively supported and working. From what i have seen the original developer has abandoned this Plugin a while ago and now the Emby Team is in charge for it. Is there anybody here who can confirm that this plugin is working with recent versions of Emby and TVH? I tried to get the Plugin working some weeks ago (tried it many times in the past) but failed again. Now i ask myself if i do something wrong or if the plugin is simply broken. Any feedback from people which actively use this plugin would be appreciated. Edited May 1, 2021 by darkside40 Link to comment Share on other sites More sharing options...
muppets4 23 Posted May 1, 2021 Share Posted May 1, 2021 I use it actively with tvheadend and oscam on a Qnap server in conjunction with Emby. When setting it up I ran into problems. When entering your tvheadend username and password it does not save it. Only after restarting Emby the data was saved. Took me a while to solve it. Link to comment Share on other sites More sharing options...
Q-Droid 652 Posted May 1, 2021 Share Posted May 1, 2021 The Emby team has been recommending the M3U URL option with TVHeadend. Don't know how much effort is going into the plugin maintenance. Link to comment Share on other sites More sharing options...
muppets4 23 Posted May 1, 2021 Share Posted May 1, 2021 In my specific case I cannot use the url option. My guide information comes from the dvb-c signal. I cannot be the only one. I've not seen that working through the url option Link to comment Share on other sites More sharing options...
Q-Droid 652 Posted May 1, 2021 Share Posted May 1, 2021 Are you saying the TVH XMLTV API doesn't work for you? Used as the TV Guide Data Provider in Emby it should match the channels from the M3U URL. http://localhost:9981/xmltv/channels https://github.com/tvheadend/tvheadend/blob/master/docs/markdown/url.md Link to comment Share on other sites More sharing options...
darkside40 91 Posted May 1, 2021 Share Posted May 1, 2021 Yes m3u might be an option but only without integrated recordings i think. Link to comment Share on other sites More sharing options...
Q-Droid 652 Posted May 1, 2021 Share Posted May 1, 2021 1 hour ago, darkside40 said: Yes m3u might be an option but only without integrated recordings i think. I'm not quite sure what you mean by this. Using M3U tuner the TV recordings are done by Emby, from the internal guide and scheduler, directly to Emby libraries and including metadata. If I recall this was not the case with the TVH plugin. But it's been a few years since I last tried it. Link to comment Share on other sites More sharing options...
muppets4 23 Posted May 1, 2021 Share Posted May 1, 2021 7 hours ago, Q-Droid said: Are you saying the TVH XMLTV API doesn't work for you? Used as the TV Guide Data Provider in Emby it should match the channels from the M3U URL. http://localhost:9981/xmltv/channels https://github.com/tvheadend/tvheadend/blob/master/docs/markdown/url.md I never got that to work, while the plug-in worked great. And I can manage my recordings from within Emby. So why break something that is working great? Link to comment Share on other sites More sharing options...
vaise 307 Posted May 1, 2021 Share Posted May 1, 2021 17 minutes ago, muppets4 said: I never got that to work, while the plug-in worked great. And I can manage my recordings from within Emby. So why break something that is working great? Worked first time for me. Emby is managing all the recordings then. never missed a beat for me. Less of failures points. Been using it that way for years. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now