tvbulvar 1 Posted June 12, 2023 Share Posted June 12, 2023 Не могу подключиться к своему серверу и внешней сети,пробывал пройти по инструкции .Проблема осталась,порты на роутере пробросил но это не помогло.При запуске tracert 8.8.8.8 3 и 4 шаг на скрине. Link to comment Share on other sites More sharing options...
Luke 37161 Posted June 13, 2023 Share Posted June 13, 2023 HI, are you able to connect to your server from inside the local network? Link to comment Share on other sites More sharing options...
tvbulvar 1 Posted June 15, 2023 Author Share Posted June 15, 2023 Привет,да из локальной сети все работает, как я понял из вашей инструкции,если при tracert 8.8.8.8 ,выходят подобный адрес.Это означает , что меня блокирует провайдер верно? Link to comment Share on other sites More sharing options...
tvbulvar 1 Posted June 16, 2023 Author Share Posted June 16, 2023 (edited) 14.06.2023 в 01:18, Люк сказал: Привет, ты можешь подключиться к своему серверу из сети? Да из локальной сети все работает. Edited June 16, 2023 by tvbulvar Link to comment Share on other sites More sharing options...
Luke 37161 Posted June 18, 2023 Share Posted June 18, 2023 @tvbulvarwhere did you see this instruction about tracert? @Carlo? Link to comment Share on other sites More sharing options...
tvbulvar 1 Posted June 19, 2023 Author Share Posted June 19, 2023 21 hours ago, Luke said: @tvbulvarгде вы увидели эту инструкцию про tracert? @Карло? https://github.com/EmbySupport/Emby.Docs/blob/master/Remote-Setup.md ссылка из инструкции по проверке подключения Link to comment Share on other sites More sharing options...
Luke 37161 Posted June 19, 2023 Share Posted June 19, 2023 3 hours ago, tvbulvar said: https://github.com/EmbySupport/Emby.Docs/blob/master/Remote-Setup.md ссылка из инструкции по проверке подключения Have you also taken a look at this? Connectivity Link to comment Share on other sites More sharing options...
Carlo 4330 Posted June 20, 2023 Share Posted June 20, 2023 @tvbulvarHow far do you get setting this up following the Remote Setup document? Tell us what you get when following the directions. It tells you what to do, then how to test the steps. For example after opening the ports and allowing remote connections you can reboot the server. It will then show the remote or outside address. The diagnostic test is going to the website it suggests and comparing the two IP addresses. They have to match before moving on. We need to know which step doesn't work and what you get when testing it. Link to comment Share on other sites More sharing options...
tvbulvar 1 Posted June 25, 2023 Author Share Posted June 25, 2023 (edited) On 20.06.2023 at 14:57, Carlo said: @tvbulvarКак далеко вы продвинулись в настройке, следуя документу по удаленной настройке? Расскажите нам, что вы получите, следуя инструкциям. Он говорит вам, что делать, а затем как проверить шаги. Например, после открытия портов и разрешения удаленных подключений вы можете перезагрузить сервер. Затем он покажет удаленный или внешний адрес. Диагностический тест переходит на предложенный веб-сайт и сравнивает два IP-адреса. Они должны совпасть, прежде чем двигаться дальше. Нам нужно знать, какой шаг не работает и что вы получите при его тестировании. по инструкции проходил,пункт проверки доступности порта через сайт https://canyouseeme.org/. Порт не доступен,хотя на роутере порт 8096 проброшен. На сервере внешний ip написан ,но по нему нет доступа . Edited June 25, 2023 by tvbulvar Link to comment Share on other sites More sharing options...
Carlo 4330 Posted June 25, 2023 Share Posted June 25, 2023 From the command line run a trace route to 1.1.1.1 On windows the command is: tracert 1.1.1.1 Copy the results and send them to me in a private message. Send me a picture of server's web console showing the IP/Ports in use. If you can also send me a picture of your router setup showing the port forwarding. You can message me by hovering over my avatar and using the message button you will see. Carlo Link to comment Share on other sites More sharing options...
tvbulvar 1 Posted June 26, 2023 Author Share Posted June 26, 2023 19 hours ago, Carlo said: Из командной строки запустите маршрут трассировки до 1.1.1.1. В Windows команда: tracert 1.1.1.1 Скопируйте результаты и пришлите мне в личное сообщение. Пришлите мне изображение веб-консоли сервера, показывающее используемые IP/порты. Если вы также можете отправить мне изображение настройки вашего маршрутизатора, показывающее переадресацию портов. Вы можете написать мне, наведя курсор на мой аватар и нажав кнопку сообщения, которую вы увидите. Карло Отправил вам в личные сообщения Link to comment Share on other sites More sharing options...
Carlo 4330 Posted June 27, 2023 Share Posted June 27, 2023 (edited) Received your PM and found your problem. There are several sets of IP address ranges that have special meaning and are handled "special". These sets of IP ranges are known as private network addresses. Address ranges to be use by private networks are: Class A: 10.0. 0.0 to 10.255. 255.255. Class B: 172.16. 0.0 to 172.31. 255.255. Class 192.168. 0.0 to 192.168. 255.255. The private network space are addresses you can use in any LAN setup but not directly on the Internet as they are no routes for these iPs. Cutting to the heart of the matter, when you look at the IPs used starting from it leaving your network we have a 10, then two 172.28 networks all using these private numbers. When ISPs do this it's part of something known as CG-NAT (carrier grade Network Address Translation). In English this means you have no WAN IP associated with your network and can't rub a server without some type of relay, tunnel or other mechanism that is linked to a public network. Which way to proceed really depends on how you are planning to use your server remotely and what devices will be accessing remotely. If it's just your family on phones, tablets and computers a really easy way to proceed is using https://tailscale.com/ This allows you to have your own private VPN where clients are always connected and would access your server via the VPN. The reason this works is because you have a VPN client on each device. So if you let us know how you plan to use remote access and also tell us what you get running a test at https://www.speedtest.net/ and https://speed.cloudflare.com/ Give us both the download and upload speeds from both. Carlo Edited July 21, 2023 by Carlo Link to comment Share on other sites More sharing options...
Luke 37161 Posted July 1, 2023 Share Posted July 1, 2023 @tvbulvar has this helped? Link to comment Share on other sites More sharing options...
tvbulvar 1 Posted July 11, 2023 Author Share Posted July 11, 2023 On 01.07.2023 at 22:26, Luke said: @tvbulvarэто помогло? Не проверил,пока ищу возможность установить tailscale на truenas.. Link to comment Share on other sites More sharing options...
tvbulvar 1 Posted July 11, 2023 Author Share Posted July 11, 2023 On 6/27/2023 at 12:28 AM, Carlo said: Получил ваше ПМ и нашел вашу проблему. Существует несколько наборов диапазонов IP-адресов, которые имеют особое значение и обрабатываются «специально». Один из этих наборов диапазонов IP-адресов известен как частные сетевые адреса. Диапазоны адресов, которые будут использоваться в частных сетях: Класс А: 10,0. от 0,0 до 10,255. 255.255. Класс Б: 172,16. от 0,0 до 172,31. 255.255. Класс 192.168. от 0,0 до 192,168. 255.255. Частное сетевое пространство — это адреса, которые вы можете использовать в любой настройке локальной сети, но не напрямую в Интернете, поскольку они не являются маршрутами для этих IP-адресов. Переходя к сути дела, когда вы смотрите на используемые IP-адреса, начиная с него, покидая вашу сеть, у нас есть 10, а затем две сети 172.28, все из которых используют эти частные номера. Когда интернет-провайдеры делают это, это часть чего-то, известного как CG-NAT (преобразование сетевых адресов операторского класса). На английском языке это означает, что у вас нет IP-адреса WAN, связанного с вашей сетью, и вы не можете работать с сервером без какого-либо ретранслятора, туннеля или другого механизма, связанного с общедоступной сетью. Какой способ действий действительно зависит от того, как вы планируете использовать свой сервер удаленно и какие устройства будут получать удаленный доступ. Если это только ваша семья на телефонах, планшетах и компьютерах, очень простой способ продолжить — использовать https://tailscale.com/ . Это позволяет вам иметь свою собственную частную VPN, где клиенты всегда подключены и будут получать доступ к вашему серверу через VPN. Причина, по которой это работает, заключается в том, что у вас есть клиент VPN на каждом устройстве. Поэтому, если вы сообщите нам, как вы планируете использовать удаленный доступ, а также сообщите нам, что вы получите, проведя тест на https://www.speedtest.net/ и https://speed.cloudflare.com/ Дайте нам скорость загрузки и выгрузки с обоих. Карло @Carlo 1 Link to comment Share on other sites More sharing options...
Luke 37161 Posted July 11, 2023 Share Posted July 11, 2023 Do you still have a question or issue? Link to comment Share on other sites More sharing options...
tvbulvar 1 Posted July 24, 2023 Author Share Posted July 24, 2023 On 11.07.2023 at 20:28, Luke said: У вас все еще есть вопрос или проблема? Нет,спасибо за помощь буду пробывать Link to comment Share on other sites More sharing options...
Luke 37161 Posted July 27, 2023 Share Posted July 27, 2023 Let us know how you get on. Thanks. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now