All Activity

OK, here’s some thoughts… (sorry for the rambling length)…hopefully will give you some ideas to try out… A good point. Yes, it is somewhat possible. Note: Emby does not import all tags though. If you have modified your embedded metadata, usually Emby should pick up the changes upon a rescan of the library, or the relevant parent folder – but not always. Sometimes scanning the individual song files or the virtual album (more on this later) will work - but not always. (I think it has been a bit worse since 4.9.1.90 - but difficult, from the outside, to pinpoint why) A last resort is typically: Remove the problem album folder(s) from your music library Scan your music library (though I find the parent folder is usually sufficient) Now there should be no trace of the files in the Emby database and the relevant page views. Add the files back into your library (perhaps one Album at a time?) Rescan library (or parent folder) Now the modified album(s) should ideally appear correctly If the problems persist – recheck the embedded metadata in Mp3tag. It may ultimately come down to this and you could take this approach OR if you are just starting on setting up your Emby music library to begin with, it may be quicker and easier to start again by deleting the current library and creating a new one??? I downloaded your test files… Seeing that these are from a Classical music album, it now makes more sense that you don’t use AlbumArtist – though there may be better ways than using “Various Artists” that may be useful (more on this later). From your DISCOGSURL tag I think this is the relevant album: Upon firstly checking your embedded metadata tags in Mp3tag, all relevant fields/tags appeared to be correct with the same ALBUM and ALBUMARTIST across all the songs. Therefore (in theory) adding to Emby should create one album of three songs. (Note: I’m currently using Emby Beta 4.10.0.4 on a Windows PC. While this is different than your setup, my assumption is that this won’t matter greatly for this testing purpose???) When I added your test album/songs (unmodified) to my library, it imported as one album, as follows: Therefore, you may need to look at the removing/rescanning steps above, for your set up??? Keep reading though...! Beyond that, here are some more observations… You don’t have any embedded album art, so I assume you have folder.jpg (or similar) in your album folders? (as a test I added the embedded artwork in Mp3tag). The songs appear in alphabetical order rather than Disc and Track order because you have no embedded Track number tags and using (e.g.) a Disc number of “01-01” will not import the Disc number (as a test I added the Track numbers and used “1” and “2” as the Disc numbers, as per your tags and the Discogs album info). You have song years of 1976 and 1977 across the three songs. I assume these are the years of the individual performances (based on the Discogs data). Emby shows the album as “1976” probably based on the first song alphabetically? But the difference in song years doesn’t seem to split the album? (as a test I changed this for all songs to the album year of 1996). I also added the Discogs album reference number directly into Emby. Here is the result, upon rescanning the parent folder (rescaled to fit everything on screen): I’m not suggesting you have to do any of this (unless you want to). Maybe the correct Track and Disc Numbers are useful? Maybe the song performance years are more important than the album year? (Note: you could keep the song years embedded and still change the album year in Emby – but this could be lost upon rescanning.) For this Album you could potentially make the album Composer “Copland, Aaron” the Album Artist. Emby will see the Album Artist and the Composer as the same entity. There may be other useful Album Artist methods for Classical music – but not my area of expertise!!! I see you have an embedded PLAYLIST tag of: Orch GB-IE-US for these songs. If you make a new Mp3tag field called ROONTRACKTAG and copy over your PLAYLIST tags (it can be done in bulk) then Emby will import these for you, into an Emby Tag, upon a rescan: Lastly, while I’ve been doing all of this and then changing Album Artist to “Copland, Aaron” and back again to “Various Artists”, not paying too much attention – IT HAPPENED – rescanning the parent folder did not pick up this specific Album Artist change!!! I then tried rescanning from the virtual album and the change was picked up immediately. So yeah, there is possibly something strange going on, but rescanning from the album is easy to do… or may well have been my error?????? If anything above has not been explained clearly enough. let me know. There are more technical areas you could look at, such as FFPROBE and logs, but that would need Emby to assist, rather than me. Anyway, I managed to listen to a long forgotten ELP album and learnt that Aaron Copland was the original composer of Fanfare for the Common Man. Cheers!

installed on radxa rock 5b+ armbian ubuntu/gnome 1080p is fine,but 4k just stutters terrible remote play ,and i can 4k using other devices fine and emby (android tv box) any reason for this changed playback settings around ,no joy. UPDATE i have Mali G610 GPU ,does emby support this for video decode ,if not what is the point of emby linux when most devices will be SBC's with theses sort of gpu

Thanks, it seems I've solved it by clearing the DNS cache.

Are you running your own Emby server? Emby is a software provider, it does not provide content. If you have been watching content from someone else's server and are now unable to connect to that persons server; we cannot help you.

Hallo zusammen, Ich möchte gern mein Emby etwas aufhübschen / stylen. Wer kennt sich damit aus und kann mir ein paar gute Anleitungen hier verlinken. Ich habe schon hier etwas gefunden, aber ich sehe da keinen Unterschied !? Oder der Anwender (ich) stellt sich einfach zu "blöd" an

Yes, this is an old issue as the server is querying every tv show in your library usually at the time you click Upcoming as it is only cached for so long. Minus script running the api Missing or Upcoming request manually there currently isn't much that can be done.

Considering how common these have been lately: Are you running your own Emby server? Emby is a software provider, it does not provide content. If you have been watching content from someone else's server and are now unable to connect to that persons server; we cannot help you.

Hi, in this screenshot you are given four suggestions of how to resolve your issue. Which one would you like to go with?

Hello, good evening. Excuse me, is there a problem with the Emby servers? I can't connect locally or remotely.

Guten Morgen, ich habe auch dieses Problem. Nach dem anhalten / Pause stockt das Video / Film . Das Bild bleibt dann stehen der Ton läuft weiter und nach ein paar Sekunden ist alles vorbei der Film springt wieder etwas zurück und alles läuft normal. Hab bisher kein Problem damit. LG Alex

Hi, that executable hasn't been updated in a while. I would try installing our new windows app from the windows store.

MalwareBytes has just flagged C:/Users/[my user name]/AppData/Roaming/Emby-Theater/System/x64/Electron/Electron.exe as spyware.

Navigation in ET seems to function correctly for me. Using the keyboard, mouse and remote. Not sure what you mean by "clicking on the arrows" because there are no arrows on my screen (Latest Movies, ...). Perhaps a screenshot would help. I tested with TV mode enabled in both Vertical and Horizontal and disabled. To scroll the "Latest Movies" list with the mouse I have to click and drag the list from left/right. ET version: 3.0.20 Server version: 4.9.3.0 data-appversion: 4.9.3.21

Hi there, let's look at an example. Please attach the information requested in how to report a media playback issue. Thanks!

Hi, what left or right arrows do you mean?

Did you get any downloads?

Hello All, I have been using Emby Server on my MacMini M1 for quite soon time now (years). Am currently on Version 4.10.0.4 beta but the version doesn't seem to matter. After Deleting a episode it just goes to the trash and I have to empty manually. Is this normally how it suppose to work? On my Linux box it get deleted automatically and not stuck in Trash like macos? Thanks, Tim

@Babatom?

Yes, that page needs some cleanup, but it's sole purpose is to get you to GitHub for downloading the SDK.

I have more recent tests in this other post. Can anyone help me decipher what's going on?

Hmm maybe something wrong on my end but clicking Download gets me this. Anyway site is not very intuitive, just done some more clicking and ended up at Github which I thought wasn't the repository but obviously it is

I can confirm, with Emby Theater if I click on left or right arrows to navigate any selected segments like "Latest Movies" it does nothing, doesn't work since yesterday.

Try this one. WatchPartyForEmby.dll

Four possible click which get you to the download...

Am I missing something? I want to start developing a plugin and went to to look at the API area and found a Template Plugin area but no source code, been on lots of links but they all seem to go in circles