All Activity

This. And if your domain doesn't have a PTR record for reverse lookups then your IP is all they know and can't complete the TLS handshake to get any more info. Just don't run non-TLS services on the same IP. Most domains wouldn't need a PTR unless running an email server and if someone is then they should know enough to protect their services.

Grim, that's the ticket, enabled and refreshed a couple and they now have thumbnails for the episodes - thanks. Since that's last in the order I'm assuming that it'll go to the other sources, tvbd etc. first and generate one as a last resort. Luke, attached is a mediainfo on that file, at the bottom it has a thumbnail of that episode as an attachment in the MKV. What/when/if anything are those attachments used in Emby? With a file explorer (windows) add on they show up in a folder view instead of generic icons. mediainfo.txt

Bei welchem Anbieter bist du? Tippe mal Telekom oder Vodafone? Je nach Anbieter wird die IPv4 mehr oder weniger häufig getauscht. Wenn du nun DynDNS nutzt, ist es wichtig dass du dich über die bei NoIP vergebene DynDNS-Adresse von ausserhalb mit deinem Server verbindest (also z.B. NCAA1701AsServer.ddns.net:8096), damit du auch nach IP-Wechsel weiterhin Zugriff auf den Server hast. Unabhängig davon kann ich dir nur dringend davon abraten, deinen Server über Port 8096/8086 public zu exposen (ist 8086 aus deinem ersten Post korrekt?). Falls du z.B. ne Fritzbox nutzt, richte lieber Wireguard VPN ein.

Version: 4.9.3.0 Server: Windows (Win 11 Pro) Hi folks, I’m running into a strange issue with my Emby music library that I haven’t seen before. Up until now, adding albums (FLAC format) has been completely straightforward. I just copy the files to my NAS, run a library rescan, and the albums appear in Emby without any problems. Yesterday I added three new albums, but I noticed that some tracks are missing from all three albums inside Emby. In addition, the metadata appears to be incorrect or mixed up for some of the tracks. Things I have tried Removed the three albums from the NAS and ran a library rescan to clear them from Emby Verified that all the FLAC files are intact and playable (they are fine) Re-added the files individually to the NAS and rescanned the library (same issue) Tried manually adding the MusicBrainz ID for each album (no change) Has anyone encountered something similar or have any suggestions on what might be causing this? It's only happening with Music albums, everything else working as expected. In case its relevant, I nest music as FLAC > Artist > Album Name - Year > files Thanks in advance for any help. Sample - Tracks Missing Corresponding Directory on NAS Metadata Problems

Server name indication. Simple: The reverse proxy just reacts when the specified hostname, e.g. emby.yourdomain.com is called by the client. Many simple bots, vulnerability scanners and automated scripts try to connect directly to your public IP address.

Jm, What is the actual pixel aspect ratio of the original media? Sometimes with .mkv content, you might have a squeezed or stretched copy that has added metadata tag to resize the media for playback. When the player accepts this resize tag, the end playback looks fine, but any fast forward would miss getting this resize control and look incorrect, just like you described. VLC [Ctrl J] , ffprobe can both find the file info to show if this is happening. Aspect Ratio errors and forced resize settings i quite common with content from DVD's or from about 10% of online media.

Kao, Another method, often used online, is to have an alternate, lower res copies, available to play for users who run into bandwidth or server/network traffic limits. When lower res media are made in advance and saved to the same directory, they can show up as a selection drop down in the media page: 4K 60fps, 4K 30fps, 1080P, 720P...

Thanks so much Lessaj it was set to HQ

Go to Video Player and try changing the quality preset to Energy Efficient.

What's SNI?

I agree that for immediacy and non-technical users something is better than nothing. But we also have to be careful and not give those same users a false sense of security. Don't want them to think that changing their port range is a one-and-done fix and now they're secure...all good! As @rbjtech and many of us have posted before there are basic security hygiene steps the non-technical admins can apply on their servers. This is because out of the box Emby has horrible defaults and very little if any guidance and warnings in the application itself. The devs could do a much better job of initializing Emby with better defaults and opt-in settings in the name of security. And if someone decides to change their external port they should pick a value that services like Shodan don't scan, which is difficult. Shodan says they scan for 250+ ports which is vague and the API has a much longer list. For example: https://api.shodan.io/shodan/ports

A friend reported the exact same issue on my server today. Client Emby Theater 3.0.20, server 4.9.3.0 She's using the keyboard arrows for now.

Few fixes and adjustment, etc... Also removed the pop-up hover effect over media cards (it started to annoy me.). Enjoy.. Emby Navy and Gold v2.4.css

Appreciate your response but it’s probably a larger conversation for a wider audience. Sometimes you just have to make responses for quick wins for less technical Emby people out there. I wouldn’t normally advise obfuscation By using port 443 to hide in the background noise, all you’re really hiding from is traffic analysis monitoring from ISPs and other suspicious characters…lol You’re not going to hide from a port scan, a web server is a web server and if someone is looking for one they will gladly spend their curiosity looking at an Emby server, which in most cases will show the usernames… As for scanning, yes an automated scan makes a lot of things trivial but as I said, someone casually or even intentionally looking for Emby severs is not running a full scan. Anyone who blanket scans hundreds of thousands of home users is going to get noticed by their ISP and maybe even big brother. Especially using aggressive tools, otherwise it will take a long time and your Emby server is not likely to be a target. We can all give up if nation states want our Emby libraries!! I see hits against 80,443,8096,8920 from time to time. I’ve never seen anyone find my port - not that I’m setting a challenge But I do agree, a properly configured reverse proxy is the best solution but you’ve got to have actions that anyone can do regardless of their technical capability. Maybe they increase their learning and want to move to the next stage. Edit: this has reminded me of a suspicious event months ago, going to check my logs to see if I still have it. There may be more to this whole thing.

Here's my setup: Emby server 4.9.3.0 in a docker container on UnRaid. No GPU on it and no transcoding set, as desired Emby Theater 3.0.20 on Windows 11 home playing a 4K Live TV stream from server above Emby Windows 2.234.2.0 on Windows 11 Pro streaming the same 4K Live TV channel from server above Here's the Stats for Nerds from Emby Theater. As you can see Hardware acceleration is dxva2-copy. Stream is playing fine and client CPU usage is low Here's the Stats for Nerds from Emby Windows. Notice the Hardware acceleration is set to NO. Stream is playing fine except client CPU usage is through the roof So, how to set proper hardware acceleration on Emby Windows 2.234.2.0?

I recently started having issues with Live TV. That's our main use for Emby. We connect it to HD Homerun so we can watch antenna channels on multiple devices. Also recently noticed some of our recordings fail mid-stream. We travel sometimes and like to watch our local channels/shows wherever we are. Since we may go for a few weeks at a time, I created a start up task to re-start Emby daily. We may have an issue accessing/watching on one day, but it usually clears on the next. I read some past topics on Tuner not found error and tried to resolve this myself, but have been unsuccessful so far. Things that I have tried: 1) made sure Emby was up-to-date, 2) Tried re-starting EMBY & the server, 3) Verified Firewall still allows Emby services, 4) Un-installed my Anti Virus software, 5) Removed our picture library from displaying (not needed for us), 6) Re-downloaded HD Home Run app to make sure it is current. I did enable detailed logging and tried again, unsuccessfully. I can forward the logs, if needed. I've seen errors in the log like: Error LiveTV: Error deserializing C:\Users\xxxxx\AppData\Roaming\Emby-Server\programdata\data\livetv\timers.json Error HdHomerunHost: Error reading file: C:\Users\xxxxx\AppData\Roaming\Emby-Server\programdata\data\livetv\tuner_........._channels I am not sure what to try next. Any help is appreciated. Thanks.

Set up VirtualTV. Setup a channel for 80's Horror movies; setup dates from 1980 - 1989. Choose under genre HORROR, but nothing shows...I followed the guide line, but I do believe its out of date... I want to be able to choose horror genre only...ideas?

This plugin is great and keeps getting better. I have a couple of requests that I think will complete my use case, at least for now I would like to have the option to filter by "Overview" keyword with a contains or does not contain options. ALSO, perhaps adding the contains and does not contain options to the title filter also. Does the "Title" filter search episode titles? If not could we get an "Episode Title" filter with the options of contains and does not contain? USE CASE My use case is primarily for finding Christmas, Halloween and Thanksgiving episodes during the holiday season and putting and tagging them or putting in a collection. I would filter for keywords in the episode titles and in the overview. I normally am looking for the keywords Christmas, Halloween and Thanksgiving.

Hello, With Emby TVOS 2.03 on my Apple TV 4K, movies play perfectly in 1080p. However, as soon as I play a 4K movie with Dolby Vision, the colors and exposure become dull and flat.The same movie plays correctly via Infuse or Plex (on the Apple TV 4K). In all cases, it’s direct play. If relevant, here are the details (it is an MKV file): Title 4K Dolby Vision HEVC Codec HEVC Dolby Profile Profile 8.1 (HDR10 compatible) Profile Main 10 Level 153 Resolution 3840x2160 Aspect Ratio 16:9 Interlaced No Frame Rate 23.976 Bitrate 63 Mbps Video Format Dolby Vision Primary Colors BT.2020 Color Space BT.2020NC Color Transfer SMPTE 2084

Con Emb Tampoco sale disponible para Instalar

New version out (v2.3.4) at yocksers/EmbyCredits Github. Added: Plugin now checks when a video has changed and sees if the time stamps are still there and if not restore them if they are present in the backup files. This feature can be turned on and off. This has been made to fix the problem of Emby sometimes deleting time stamps. Added a Chapter edit function, this can be found in the Chaper Edit tab. This was heavily inspired by Teams B Chapter API so a special thanks to him! Added an automatic skip intro blocker. When activated for a series it will stop intros from being automatically skipped if configured in Emby. This is for is people want to automatically skip some intros but not others. Changed: Backup system has been changed to save files per TV show instead of one big backup file. This was done for user friendliness but also to make the auto restore system work better. Fixed: Minor bug fixes that should not be noticeable to users. Special thanks as always to @Neminemfor help with the plugin. @spk2010@DarWunI finished and added the "fix" to Emby deleting the time stamps. Hopefully this will fix all the problems with Emby doing that until the devs look into the problem.

Automating the scanning and attempts to breach reduce the level of effort to nothing. There's no inherent security in port values and trying to obfuscate the port doesn't add security. Once the server responds to a request then the application will be known immediately. You'd be better off adding Emby to the background noise by using a well known port (443) than trying to isolate it to a range that may confuse users, if you have any. If someone wants to secure their server then proven methods are better than obscurity. TLS is the most basic and facilitates others. A reverse proxy has become a must have. Enable SNI (many do by default) so that IP based requests are rejected. Enable IP geo-blocking. You can continue up the chain with IDS/IPS and more complex and robust measures. It all depends on the level of effort you want to invest and of course knowledge. A reverse proxy with SNI may be a good stopping point for most.

Sadly, the Default security configuration for Emby it is imo extremly lacking - it simply does not change when people tick the 'Allow remote Connections to this Emby Server'. Below are just some examples of what COULD be done when the above option is selected : Remote Access is automatically removed for any Admins - you can overwrite this, but it should default to no. This renders any system API useless, as the Admin account has no remote access. If Admin is your only account, then you get asked if you would like to clone it (+ all it's play history etc) and this new non admin account has the remote access. Enforce a decent password for any Admin Account & any account that has remote access. It doesn't need to stupid entropy - nobody is going to be personally brute forcing your emby build (good brute force protection is built into emby) - but it needs to be enough to keep out bots and previously breached passwords. Set 'Hide this user' when remote Set 'Hide this user on devices they've never signed into'

Try searching for emb

Hola Hace 2 años que uso el servidor Emby Y he querido dar acceso a un par de amigos nuevos Ellos tienen TVs Samsung de distintos años y modelos 2024 y 205 Ya no encuentran la aplicación de Emby en su tienda de aplicaciónes Antes si aparecía en cualquier modelo de TV samsung Que sucedió??